Effect of high shear rate on the mechanical properties of polyethylene, poly(ethylene terephthalate), polystyrene, and polypropylene waste blend

被引：1
|
作者：
Saat, Mohd Adly Rahmat [1 ]
Rasid, Rozaidi [1 ]
机构：
[1] Natl Univ Malaysia, Dept Appl Phys, Bangi 43600, Selangor, Malaysia
来源：
POLIMERY | 2022年 / 67卷 / 02期
关键词：
recycling; shear rate; polymer blends; mechanical properties; COMPATIBILITY;
D O I：
10.14314/polimery.2022.2.4
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
The effect of high shear rate on the mechanical properties of polyethylene (PE), poly(ethylene terephthalate) (PET), polystyrene (PS), and polypropylene (PP) waste blend was investigated. The pro-cess was carried out at a temperature of 120 degrees C using a counter-rotating twin-screw extruder. A constant screw speed of 250 rpm and a constant weight ratio of the PE/PET/PS/PP components of 1:1:1:1 were used. The preliminary research showed that the high shear rate had no effect on the impact strength. However, the significant improvement in the flexural properties was observed as compared to those obtained at a lower screw speed of 80-120 rpm.
引用
收藏
页码：72 / 75
页数：4
相关论文
共 50 条
  • [31] The Morphology Control and Mechanical Properties of High Density Polyethylene and Polypropylene Blend under Oscillating Shear Stress Field
    Zhang, Gong
    Fu, Qiang
    Shen, Kai-Zhi
    Jiang, Long
    Kao Teng Hsueh Hsiao Hua Heush Hsueh Pao/ Chemical Journal of Chinese Universities, 2000, 21 (04): : 633 - 636
  • [32] The morphology control and mechanical properties of high density polyethylene and polypropylene blend under oscillating shear stress field
    Zhang, G
    Fu, Q
    Shen, KZ
    Jiang, L
    CHEMICAL JOURNAL OF CHINESE UNIVERSITIES-CHINESE, 2000, 21 (04): : 633 - 636
  • [33] On nanoclay localization in polypropylene/poly(ethylene terephthalate) blends: Correlation with thermal and mechanical properties
    Entezam, Mehdi
    Khonakdar, Hossein Ali
    Yousefi, Ali Akbar
    Jafari, Seyed Hassan
    Wagenknecht, Udo
    Heinrich, Gert
    MATERIALS & DESIGN, 2013, 45 : 110 - 117
  • [34] Compatibilizing effect of mesoporous fillers on the mechanical properties and morphology of polypropylene and polystyrene blend
    Wang, Na
    Gao, Na
    Fang, Qinghong
    Chen, Erfan
    MATERIALS & DESIGN, 2011, 32 (03): : 1222 - 1228
  • [35] Study of the compatibilizer effect on blends prepared from waste poly(ethylene-terephthalate) and high density polyethylene
    Kratofil, L.
    Hrnjak-Murgic, Z.
    Jelencic, J.
    Andricic, B.
    Kovacic, T.
    Merzel, V.
    INTERNATIONAL POLYMER PROCESSING, 2006, 21 (03) : 328 - 335
  • [36] Properties and morphology of poly(ethylene terephthalate) and high-density polyethylene blends
    Guerrero, C
    Lozano, T
    González, V
    Arroyo, E
    JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 82 (06) : 1382 - 1390
  • [37] Effect of Blend Ratio on Phase Morphology and Mechanical Properties of High Density Polyethylene and Poly (Butylene Succinate) Blend
    Aontee, Ajcharaporn
    Sutapun, Wimonlak
    MULTI-FUNCTIONAL MATERIALS AND STRUCTURES IV, 2013, 747 : 555 - 559
  • [38] Effect of calcium carbonate on the mechanical properties of polyethylene terephthalate/polypropylene blends with styrene-ethylene/butylene-styrene
    Hong-Nga Thi Pham
    Van-Thuc Nguyen
    Journal of Mechanical Science and Technology, 2020, 34 : 3925 - 3930
  • [39] Properties of Recycled and Virgin Poly(ethylene terephthalate) Blend Fibers
    Lee, Joo Hyung
    Lim, Ki Sub
    Hahm, Wan Gyu
    Kim, Seong Hun
    JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 128 (02) : 1250 - 1256
  • [40] Effect of calcium carbonate on the mechanical properties of polyethylene terephthalate/polypropylene blends with styrene-ethylene/butylene-styrene
    Pham, Hong-Nga Thi
    Nguyen, Van-Thuc
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2020, 34 (10) : 3925 - 3930
12345