Effect of high shear rate on the mechanical properties of polyethylene, poly(ethylene terephthalate), polystyrene, and polypropylene waste blend

被引：1
|
作者：
Saat, Mohd Adly Rahmat [1 ]
Rasid, Rozaidi [1 ]
机构：
[1] Natl Univ Malaysia, Dept Appl Phys, Bangi 43600, Selangor, Malaysia
来源：
POLIMERY | 2022年 / 67卷 / 02期
关键词：
recycling; shear rate; polymer blends; mechanical properties; COMPATIBILITY;
D O I：
10.14314/polimery.2022.2.4
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
The effect of high shear rate on the mechanical properties of polyethylene (PE), poly(ethylene terephthalate) (PET), polystyrene (PS), and polypropylene (PP) waste blend was investigated. The pro-cess was carried out at a temperature of 120 degrees C using a counter-rotating twin-screw extruder. A constant screw speed of 250 rpm and a constant weight ratio of the PE/PET/PS/PP components of 1:1:1:1 were used. The preliminary research showed that the high shear rate had no effect on the impact strength. However, the significant improvement in the flexural properties was observed as compared to those obtained at a lower screw speed of 80-120 rpm.
引用
收藏
页码：72 / 75
页数：4
相关论文
共 50 条
  • [21] A novel blend material to improve the crystallization and mechanical properties of poly (ethylene terephthalate)
    Diran Wang
    Faliang Luo
    Chunhui Luo
    Journal of Polymer Research, 2019, 26
  • [22] A novel blend material to improve the crystallization and mechanical properties of poly (ethylene terephthalate)
    Wang, Diran
    Luo, Faliang
    Luo, Chunhui
    JOURNAL OF POLYMER RESEARCH, 2019, 26 (07)
  • [23] Effect of Polystyrene on Poly(Ethylene Terephthalate) Crystallization
    Ramos Wellen, Renate Maria
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2014, 17 (06): : 1620 - 1627
  • [24] MECHANICAL-PROPERTIES AND PERMEABILITY OF POLYPROPYLENE AND POLY(ETHYLENE-TEREPHTHALATE) MIXTURES
    BATAILLE, P
    BOISSE, S
    SCHREIBER, HP
    POLYMER ENGINEERING AND SCIENCE, 1987, 27 (09): : 622 - 626
  • [25] Experimental investigation of the effects of a compatibilizing agent on the properties of a recycled poly(ethylene terephthalate)/polypropylene blend
    Baccouch, Z.
    Mbarek, S.
    Jaziri, M.
    POLYMER BULLETIN, 2017, 74 (03) : 839 - 856
  • [26] Experimental investigation of the effects of a compatibilizing agent on the properties of a recycled poly(ethylene terephthalate)/polypropylene blend
    Z. Baccouch
    S. Mbarek
    M. Jaziri
    Polymer Bulletin, 2017, 74 : 839 - 856
  • [27] Mechanical, Thermal, and Structural Characterization of Poly(ethylene terephthalate) and Poly(butylene terephthalate) Blend Systems by the Addition of Postconsumer Poly(ethylene terephthalate)
    Baxi, R. N.
    Pathak, S. U.
    Peshwe, D. R.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2010, 115 (02) : 928 - 934
  • [28] Morphology and properties of poly (ethylene terephthalate)/polyethylene in-situ microfiber-contained blend
    Li, Zhongming
    Yang, Wei
    Huang, Rui
    Yang, Mingbo
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2003, 17 (06): : 621 - 629
  • [29] Influence of epoxidized ethylene propylene diene rubber on nonisothermal crystallization kinetics and mechanical properties of poly(butylene terephthalate)/polypropylene blend
    Liu, Bo
    Wu, Wei
    JOURNAL OF POLYMER ENGINEERING, 2019, 39 (03) : 216 - 227
  • [30] New Approach to Optimize Mechanical Properties of the Immiscible Polypropylene/Poly (Ethylene Terephthalate) Blend: Effect of Shish-Kebab and Core-Shell Structure
    Wang, Yingxiong
    Mi, Dashan
    Delva, Laurens
    Cardon, Ludwig
    Zhang, Jie
    Ragaert, Kim
    POLYMERS, 2018, 10 (10)
12345