Investigation of imaging performance of amorphous selenium flat-panel detectors for digital mammography

Our work is to investigate and understand the factors affecting the imaging performance of amorphous selenium (a-Se) flat-panel detectors for digital mammography. Both theoretical and experimental methods were developed to investigate the spatial frequency dependent detective quantum efficiency [DQE(f)] of a-Se flat-panel detectors for digital mammography. Since the k-edge of a-Se is 12.66 keV and within the energy range of a mammographic spectrum, a cascaded linear system model was developed which takes into account the effect of k-fluorescence on the modulation transfer function (MTF), noise power spectrum (NPS) and DQE(f) of the detector. This model was used to understand the performance of a prototype detector with 85 mum. pixel size. The presampling MTF, NPS and DQE(f) of the prototype were measured, and compared to the theoretical calculation by the model. The calculation showed that k-fluorescence reduces the MTF by 15% at the Nyquist frequency (f(NY)) of the prototype detector, and the NPS at f(NY) was reduced to 82% of that at zero spatial frequency. The measurement of presampling MTF of the prototype detector revealed an additional source of blurring, which was attributed to the blocking layer at the interface between a-Se and the active matrix. This introduced high frequency drop in both presampling MTF and NPS, and reduced aliasing in the NPS. As a result, the DQE(f) of the prototype detector at f(NY) approaches 50% of that at zero spatial frequency.