Fibre network and compression moulding of polymer composites

被引：0

作者：

Dweib, MA ^{[1
]}

O Bradaigh, CM ^{[1
]}

机构：

[1] Natl Univ Ireland Univ Coll Galway, Dept Mech Engn, Composites Res Unit, Galway, Ireland

来源：

PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON FLOW PROCESSES IN COMPOSITE MATERIALS | 1999年

关键词：

rheology; GMT; squeeze flow; anisotropy; fibre reorientation;

D O I：

暂无

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

Squeezing flow of glass-mat reinforced thermoplastics (GMT) material was carried out in this research study to investigate the structure and reorientation of the fibre reinforcement and to develop a better understanding of the material's rheological behaviour. Circular disks of GMT material were squeezed to different final thicknesses, always forming an elliptical shape, and three-point bending tests were carried out on each specimen in the two main directions. The mechanical properties of the specimens confirmed the fibre rotation predicted by Jeffery's equation. It is shown that the fibres rotate in a manner aligning themselves in the major direction of the flow, which makes the material less anisotropic as the flow proceeds.

引用

页码：345 / 354

页数：10

共 50 条

[41] A Review of Permeability and Flow Simulation for Liquid Composite Moulding of Plant Fibre Composites
Pantaloni, Delphin
Bourmaud, Alain
Baley, Christophe
Clifford, Mike J.
Ramage, Michael H.
Shah, Darshil U.
MATERIALS, 2020, 13 (21) : 1 - 23
[42] High quality flax fibre composites manufactured by the resin transfer moulding process
Oksman, K
ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS;, 1999, : 2645 - 2649
[43] On recycled carbon fibre composites manufactured through a liquid composite moulding process
Shah, Darshil U.
Schubel, Peter J.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2016, 35 (07) : 533 - 540
[44] Extrusion and injection moulding induced degradation of date palm fibre - polypropylene composites
Domenek, Sandra
Berzin, Francoise
Ducruet, Violette
Plessis, Cedric
Dhakal, Hom
Richaud, Emmanuel
Beaugrand, Johnny
POLYMER DEGRADATION AND STABILITY, 2021, 190
[45] Dielectric flow sensing in resin transfer moulding of carbon fibre reinforced composites
Skordos, AA
Partridge, IK
PLASTICS RUBBER AND COMPOSITES, 2000, 29 (08) : 391 - 394
[46] Mechanical, Thermal, Morphological, and Fibre Characteristics During Injection Moulding of Green Composites
G. Surya Rao
K. Debnath
R. N. Mahapatra
Fibers and Polymers, 2024, 25 : 331 - 346
[47] Sepiolite as replacement of short glass fibre in polyamide composites for injection moulding applications
Herrero, Manuel
Nunez, Karina
Gallego, Raul
Carlos Merino, Juan
Maria Pastor, Jose
APPLIED CLAY SCIENCE, 2018, 162 : 129 - 137
[48] High quality flax fibre composites manufactured by the resin transfer moulding process
Oksman, K
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2001, 20 (07) : 621 - 627
[49] Tooling for near net-shape compression moulding of polymer specimens
De Focatiis, Davide S. A.
POLYMER TESTING, 2012, 31 (04) : 550 - 556
[50] Mechanical properties of natural fibre polymer composites
Sinha, Agnivesh Kumar
Narang, Harendra K.
Bhattacharya, Somnath
JOURNAL OF POLYMER ENGINEERING, 2017, 37 (09) : 879 - 895

← 1 2 3 4 5 →