Fibre network and compression moulding of polymer composites

被引：0
|
作者：
Dweib, MA [1 ]
O Bradaigh, CM [1 ]
机构：
[1] Natl Univ Ireland Univ Coll Galway, Dept Mech Engn, Composites Res Unit, Galway, Ireland
来源：
PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON FLOW PROCESSES IN COMPOSITE MATERIALS | 1999年
关键词：
rheology; GMT; squeeze flow; anisotropy; fibre reorientation;
D O I：
暂无
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Squeezing flow of glass-mat reinforced thermoplastics (GMT) material was carried out in this research study to investigate the structure and reorientation of the fibre reinforcement and to develop a better understanding of the material's rheological behaviour. Circular disks of GMT material were squeezed to different final thicknesses, always forming an elliptical shape, and three-point bending tests were carried out on each specimen in the two main directions. The mechanical properties of the specimens confirmed the fibre rotation predicted by Jeffery's equation. It is shown that the fibres rotate in a manner aligning themselves in the major direction of the flow, which makes the material less anisotropic as the flow proceeds.
引用
收藏
页码：345 / 354
页数：10
相关论文
共 50 条
  • [31] Pure compression testing of advanced fibre composites
    Anthoine, O
    Grandidier, JC
    Daridon, L
    COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (05) : 735 - 740
  • [32] Study of Sisal Fibre Attrition and Characterization during Direct Extrusion Compression Moulding
    Bommanna, K.
    Shanthakumar, G. C.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (05) : 13251 - 13257
  • [33] Compression moulding
    British Plastics and Rubber, 2000, (DEC.):
  • [34] Evaluating the mechanical properties of snake grass fibre and sisal fibre hybrid composites by injection moulding method
    Vinodkumar T.
    Chandrasekaran M.
    Vivek P.
    Arunkumar S.
    Padmanabhan S.
    International Journal of Vehicle Structures and Systems, 2019, 11 (03) : 236 - 240
  • [35] An investigation of the processability of natural fibre reinforced polymer composites on shallow and flat thin-walled parts by injection moulding process
    Azaman, M. D.
    Sapuan, S. M.
    Sulaiman, S.
    Zainudin, E. S.
    Abdan, K.
    MATERIALS & DESIGN, 2013, 50 : 451 - 456
  • [36] Effects of fibre surface silanisation on silica fibre/phenolics composites produced by resin transfer moulding process
    Wang, BC
    Huang, YD
    Liu, L
    MATERIALS SCIENCE AND TECHNOLOGY, 2006, 22 (02) : 206 - 212
  • [37] Rheological behaviour of cork-polymer composites for injection moulding
    Magalhaes da Silva, Sara P.
    Lima, Paulo Silva
    Oliveira, Jose Martinho
    COMPOSITES PART B-ENGINEERING, 2016, 90 : 172 - 178
  • [38] Ultrasonic testing of natural fibre polymer composites: effect of fibre content, humidity, stress on sound speed and comparison to glass fibre polymer composites
    A. El-Sabbagh
    L. Steuernagel
    G. Ziegmann
    Polymer Bulletin, 2013, 70 : 371 - 390
  • [39] Ultrasonic testing of natural fibre polymer composites: effect of fibre content, humidity, stress on sound speed and comparison to glass fibre polymer composites
    El-Sabbagh, A.
    Steuernagel, L.
    Ziegmann, G.
    POLYMER BULLETIN, 2013, 70 (02) : 371 - 390
  • [40] Mechanical, Thermal, Morphological, and Fibre Characteristics During Injection Moulding of Green Composites
    Rao, G. Surya
    Debnath, K.
    Mahapatra, R. N.
    FIBERS AND POLYMERS, 2024, 25 (01) : 331 - 346
12345