Fibre network and compression moulding of polymer composites

被引：0
|
作者：
Dweib, MA [1 ]
O Bradaigh, CM [1 ]
机构：
[1] Natl Univ Ireland Univ Coll Galway, Dept Mech Engn, Composites Res Unit, Galway, Ireland
来源：
PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON FLOW PROCESSES IN COMPOSITE MATERIALS | 1999年
关键词：
rheology; GMT; squeeze flow; anisotropy; fibre reorientation;
D O I：
暂无
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Squeezing flow of glass-mat reinforced thermoplastics (GMT) material was carried out in this research study to investigate the structure and reorientation of the fibre reinforcement and to develop a better understanding of the material's rheological behaviour. Circular disks of GMT material were squeezed to different final thicknesses, always forming an elliptical shape, and three-point bending tests were carried out on each specimen in the two main directions. The mechanical properties of the specimens confirmed the fibre rotation predicted by Jeffery's equation. It is shown that the fibres rotate in a manner aligning themselves in the major direction of the flow, which makes the material less anisotropic as the flow proceeds.
引用
收藏
页码：345 / 354
页数：10
相关论文
共 50 条
  • [21] Evaluation of Mechanical Properties of Sisal and Bamboo Fibres Reinforced with Polymer Matrix Composites Prepared by Compression Moulding Process
    Mohan, S. Krishna
    Ganesan, Arul Thayammal
    Ramarao, M.
    Mangrulkar, Amol L.
    Rajesh, S.
    Al Obaid, Sami
    Alfarraj, Saleh
    Sivakumar, S.
    Ganesan, Manikandan
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021
  • [22] Electrical resistance measurement of conductive network in short carbon fibre polymer composites
    Guoquan, W
    POLYMER TESTING, 1997, 16 (03) : 277 - 286
  • [23] Ultrasonic moulding of bioabsorbable polymers and polymer/drug composites
    Kellomaki, M
    Tormala, P
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1997, 16 (21) : 1786 - 1789
  • [24] Compression moulding or injection moulding?
    Wobbe, H
    Naville, R
    KUNSTSTOFFE-PLAST EUROPE, 1996, 86 (06): : 804 - &
  • [25] Microcellular wood fibre reinforced polypropylene composites in an injection moulding process
    Bledzki, AK
    Faruk, O
    CELLULAR POLYMERS, 2002, 21 (06) : 417 - 429
  • [26] Development of recycled carbon fibre moulding compounds - Preparation of waste composites
    Turner, T. A.
    Pickering, S. J.
    Warrior, N. A.
    COMPOSITES PART B-ENGINEERING, 2011, 42 (03) : 517 - 525
  • [27] Fibre reinforcement and stacking sequence influence on the through-thickness compression behaviour of polymer composites
    Gruebler, Kilian
    Thomson, Daniel
    Petrinic, Nik
    Wisnom, Michael R.
    Hallett, Stephen R.
    COMPOSITE STRUCTURES, 2023, 319
  • [28] Mechanistic model for the compression strength prediction of masonry columns strengthened with fibre-polymer composites
    da Silva, Luis C. M.
    Milani, Gabriele
    Grande, Ernesto
    Funari, Marco F.
    COMPOSITE STRUCTURES, 2024, 338
  • [29] Behavior of hollow circular steel columns in compression retrofitted with aramid fibre reinforced polymer composites
    Modak, Nabajyoti
    Sivasankar, S.
    Sounthararajan, V. M.
    Gunaselvi, S.
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 968 - 974
  • [30] Fibre hybridisation in polymer composites: A review
    Swolfs, Yentl
    Gorbatikh, Larissa
    Verpoest, Ignaas
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2014, 67 : 181 - 200
12345