Effect of solidification times on crack opening displacement of aluminium alloy castings

被引：2
|
作者：
Herrera, A
Martinez-Madrid, M
Horta, J
Castaño, VM
机构：
[1] Univ Nacl Autonoma Mexico, Ctr Fis Aplicado & Tecnol Avanzada, Queretaro 76000, Qro, Mexico
[2] Univ Autonoma Queretaro, Fac Ingn, Queretaro, Mexico
来源：
MATERIALS AND MANUFACTURING PROCESSES | 2003年 / 18卷 / 06期
关键词：
crack opening displacement of aluminium castings; solidification time; preheating temperature; silicon particle size;
D O I：
10.1081/AMP-120025083
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of mold temperature, solidification time, and metallurgical structure on the crack opening displacement (COD) at maximum load and ultimate tensile strength (UTS) of Al-10.6Si, 0.9Mg, 0.9Cu alloy have been investigated, using rectangular bars obtained from a copper mold that was preheated at different temperatures before the alloy was poured and allowed to solidify. It was found that the COD values increase and the UTS decreases as the mold temperature and solidification time increases. These parameters, which can be related to the metallographic microstructure differences, were found to have a probable effect on the fracture toughness of Al-alloys. The longer the solidification times, the coarser the silicon crystals in a alpha-aluminum matrix.
引用
收藏
页码：979 / 992
页数：14
相关论文
共 50 条
  • [41] Effect of Cold Expansion on Crack Opening Displacement and Stress Intensity Factor
    Liu, Yongshou
    Gou, Bingwang
    He, Jie
    Yue, Zhufeng
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS VIII, 2010, 417-418 : 477 - 480
  • [42] Analysis on cohesive crack opening displacement considering the strain softening effect
    Limin Wang
    Shilang Xu
    Xiqiang Zhao
    Science in China Series G, 2006, 49 : 88 - 101
  • [43] Solidification of binary hypoeutectic alloy matrix composite castings
    Mortensen, A
    Flemings, MC
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1996, 27 (03): : 595 - 609
  • [44] Model Solving of Aluminium Alloy Solidification
    Jarosova, Tereza
    Skocilasova, Blanka
    Klimenda, Frantisek
    Sterba, Jan
    Cemohlavek, Vit
    MANUFACTURING TECHNOLOGY, 2021, 21 (04): : 471 - 478
  • [45] Solidification modeling and porosity control in aluminum alloy castings
    Shenefelt, Jeffrey R.
    Luck, Rogelio
    Berry, John T.
    Taylor, Robert P.
    American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 1999, 10 : 507 - 511
  • [46] Modeling of the solidification kinetics of A356 alloy castings
    Gonzalez, C.
    Cruz, H.
    Garcia, A.
    Beltran, I.
    Atlatenco, C.
    Juarez, J.
    Informacion Tecnologica, 1999, 10 (02): : 199 - 206
  • [47] SOLIDIFICATION BEHAVIOR OF LOW-ALLOY STEEL CASTINGS
    BIBBY, PA
    BEECH, J
    JOURNAL OF THE IRON AND STEEL INSTITUTE, 1973, 211 (APR): : 290 - 292
  • [48] Solidification crack initiation and propagation in pulsed laser welding of wrought heat treatable aluminium alloy
    Sheikhi, M.
    Ghaini, F. Malek
    Assadi, H.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2014, 19 (03) : 250 - 255
  • [49] Effect of cooling rate on solidification characteristics of aluminium alloy AA 5182
    Thompson, S
    Cockcroft, SL
    Wells, MA
    MATERIALS SCIENCE AND TECHNOLOGY, 2004, 20 (04) : 497 - 504
  • [50] Effect of Different Mold Materials on the Solidification Rate and Microstructure of Magnesium Alloy Plate Castings
    Javaid, A.
    MAGNESIUM TECHNOLOGY 2022, 2022, : 327 - 334
12345