Accuracy of Implant Level Intraoral Scanning and Photogrammetry Impression Techniques in a Complete Arch with Angled and Parallel Implants: An In Vitro Study

被引:4
|
作者
Tohme, Hani [1 ]
Lawand, Ghida [2 ]
Eid, Rita [3 ]
Ahmed, Khaled E. [4 ]
Salameh, Ziad [5 ]
Makzoume, Joseph [1 ]
机构
[1] St Joseph Univ, Dept Removable Prosthodont, Fac Dent Med, Beirut 1107, Lebanon
[2] St Joseph Univ, Dept Prosthodont & Esthet Dent, Fac Dent Med, Beirut 1107, Lebanon
[3] Lebanese Univ, Fac Dent Med, Dept Prosthodont, Beirut 1107, Lebanon
[4] Griffith Univ, Sch Med & Dent, Gold Coast 4000, Australia
[5] Lebanese Univ, Fac Dent Med, Beirut 1107, Lebanon
来源
APPLIED SCIENCES-BASEL | 2021年 / 11卷 / 21期
关键词
angulated implants; implant supported prosthesis; intraoral scanning; photogrammetry; DIGITAL IMPRESSIONS; MULTIPLE IMPLANTS; TECHNOLOGY; REHABILITATION; PLACEMENT; SYSTEM;
D O I
10.3390/app11219859
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
(1) Background: Stereophotogrammetry has recently been investigated showing high accuracy in complete implant supported cases but has scarcely been investigated in cases of tilted implants. The aim of this in vitro study was to compare the accuracy of digital impression techniques (intraoral scanning and photogrammetry) at the level of intraoral scan bodies in terms of angular deviations and 3D discrepancies. (2) Methods: A stone master cast representing an edentulous maxilla using four implant analogs was fabricated. The two anterior implants were parallel to each other, and the two posterior implants were at an angulation of 17 degrees. Digital intraoral scanning (DIOS) impressions were taken after connecting implant level scan bodies to the master cast and STL files were exported (n = 15). Digital photogrammetry (DPG) impressions were captured using a PiC Camera after tightening implant level PiC optical markers and STL files were exported (n = 15). Superimposition was carried out by a software for determining the accuracy of both. (3) Results: Significant angular discrepancies (Delta A) and 3D deviations of scan bodies were found among the groups in trueness with lower deviations for the DPG (p value < 0.001). However, trueness within ISBs varied between angular and 3D deviations and outcomes were not specific to determine the effect of implant angulation. In precision, no significant differences were detected within ISBs and among both groups in terms of angular deviation. However, DPG had less deviations than DIOS group in terms of 3D deviations (p value < 0.001). (4) Conclusion: Digital photogrammetry technique conveyed the utmost accuracy in both trueness and precision for the intraoral scan bodies among both impression methods assessed. In addition, implant angulation did not influence the precision of the impression techniques but affected their trueness without explicit conclusions.
引用
收藏
页数:11
相关论文
共 50 条
  • [21] Implant impression accuracy of parallel and non-parallel implants: a comparative in-vitro analysis of open and closed tray techniques
    Osman, Motaz S.
    Ziada, Hassan M.
    Abubakr, Neamat H.
    Suliman, Ahmed M.
    [J]. INTERNATIONAL JOURNAL OF IMPLANT DENTISTRY, 2019, 5 (1)
  • [22] Accuracy of 2 direct digital scanning techniques-intraoral scanning and stereophotogrammetry-for complete arch implant-supported fixed prostheses: A prospective study
    Yan, Yuwei
    Lin, Xiao
    Yue, Xinxin
    Geng, Wei
    [J]. JOURNAL OF PROSTHETIC DENTISTRY, 2023, 130 (04): : 564 - 572
  • [23] Complete-Arch Accuracy of Four Intraoral Scanners: An In Vitro Study
    Celeghin, Giordano
    Franceschetti, Giulio
    Mobilio, Nicola
    Fasiol, Alberto
    Catapano, Santo
    Corsalini, Massimo
    Grande, Francesco
    [J]. HEALTHCARE, 2021, 9 (03)
  • [24] Influence of arch location and scanning pattern on the scanning accuracy, scanning time, and number of photograms of complete-arch intraoral digital implant scans
    Gomez-Polo, Miguel
    Cascos, Rocio
    Ortega, Rocio
    Barmak, Abdul B.
    Kois, John C.
    Revilla-Leon, Marta
    [J]. CLINICAL ORAL IMPLANTS RESEARCH, 2023, 34 (06) : 591 - 601
  • [25] Influence of scanning protocol on the accuracy of complete-arch digital implant scans: An in vitro study
    Hamilton, Adam
    Negreiros, William Matthew
    Jain, Shruti
    Finkelman, Matthew
    Gallucci, German O.
    [J]. CLINICAL ORAL IMPLANTS RESEARCH, 2024, 35 (06) : 641 - 651
  • [26] Conventional open-tray impression versus intraoral digital scan for implant-level complete-arch impression
    Kim, Kyoung Rok
    Seo, Kyoung-young
    Kim, Sunjai
    [J]. JOURNAL OF PROSTHETIC DENTISTRY, 2019, 122 (06): : 543 - 549
  • [27] The Accuracy of Casts Obtained Using Different Impression Techniques and Impression Materials in Combined Parallel and Angulated Implants: An In Vitro Study
    Menaga, V
    Chirom, Babina
    Gunadhar, Kangjam
    Priyadarshini, Shamurailatpam
    Nongthombam, Rajesh S.
    Manikandan, P.
    [J]. CUREUS JOURNAL OF MEDICAL SCIENCE, 2024, 16 (04)
  • [28] Comparative Analysis of Intraoral Scanner Accuracy in a Six-Implant Complete-Arch Model: An In Vitro Study
    Ferrini, Francesco
    Mazzoleni, Federica
    Barbini, Matteo
    Coppo, Carlotta
    Di Domenico, Giovanna Laura
    Gherlone, Enrico Felice
    [J]. PROSTHESIS, 2024, 6 (02): : 401 - 412
  • [29] Effect of splinting scan bodies on trueness of complete-arch implant impression using different intraoral scanners: an in vitro study
    Retana, Luciano
    Nejat, Amir H.
    Pozzi, Alessandro
    [J]. INTERNATIONAL JOURNAL OF COMPUTERIZED DENTISTRY, 2023, 26 (01) : 19 - 28
  • [30] Trueness of 12 intraoral scanners in the full-arch implant impression: a comparative in vitro study
    Francesco Guido Mangano
    Oleg Admakin
    Matteo Bonacina
    Henriette Lerner
    Vygandas Rutkunas
    Carlo Mangano
    [J]. BMC Oral Health, 20