The effect of hydrogen on copper nitride thin films deposited by magnetron sputtering

被引:15
|
作者
Zhang, Guangan [1 ,2 ]
Yan, Pengxun [1 ,2 ]
Wu, Zhiguo [1 ]
Wang, Jun [1 ]
Chen, Jiangtao [1 ]
机构
[1] Lanzhou Univ, Sch Phys Sci & Technol, Lanzhou 73000, Peoples R China
[2] Chinese Acad Sci, Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou 730000, Peoples R China
关键词
copper nitride; thin films; hydrogen; structure; thermal properties;
D O I
10.1016/j.apsusc.2008.01.156
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Copper nitride thin films were deposited on Si ( 1 0 0) wafers by reactive magnetron sputtering at various H(2)/N(2) ratios. X-ray diffraction measurements show that the films are composed of Cu(3)N crystallites with anti-ReO(3) structure and exhibit preferred orientation of [ 1 0 0] direction. Although the relative composition of the films has obviously changes with the H(2)/N(2) ratios, the orientations of the films keep almost no changes. However, the grain size, lattice parameter and composition of the films are strongly dependent on the H(2)/N(2) ratios. The copper nitride films prepared at 10% H(2)/N(2) ratios show poor stability and large weight gain compared to the copper nitride films prepared at 0% H(2)/N(2) ratios. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:5012 / 5015
页数:4
相关论文
共 50 条
  • [31] Characteristics of Silicon Nitride Deposited Thin Films on IT Glass by RF Magnetron Sputtering Process
    Son, Jeongil
    Kim, Gwangsoo
    [J]. KOREAN JOURNAL OF MATERIALS RESEARCH, 2020, 30 (04): : 169 - 175
  • [32] Research on titanium nitride thin films deposited by reactive magnetron sputtering for MEMS applications
    Merie, Violeta
    Pustan, Marius
    Negrea, Gavril
    Birleanu, Corina
    [J]. APPLIED SURFACE SCIENCE, 2015, 358 : 525 - 532
  • [33] Microstructure and properties of silicon nitride thin films deposited by reactive bias magnetron sputtering
    Kim, JH
    Chung, KW
    [J]. JOURNAL OF APPLIED PHYSICS, 1998, 83 (11) : 5831 - 5839
  • [34] The Influence of Hydrogen on the Properties of Zinc Sulfide Thin Films Deposited by Magnetron Sputtering
    Xu, Hang
    Wu, Lili
    Wang, Wenwu
    Zhang, Lixiang
    Zhang, Jingquan
    Li, Wei
    Feng, Lianghuan
    [J]. INTERNATIONAL JOURNAL OF PHOTOENERGY, 2014, 2014
  • [35] Measurement Of Hydrogen Capacities And Stability In Thin Films Of AlH Deposited By Magnetron Sputtering
    Dissanayake, A.
    AlFaify, S.
    Garratt, E.
    Nandasiri, M. I.
    Taibu, R.
    Tecos, G.
    Hamdan, N. M.
    Kayani, A.
    [J]. APPLICATION OF ACCELERATORS IN RESEARCH AND INDUSTRY: TWENTY-FIRST INTERNATIONAL CONFERENCE, 2011, 1336 : 189 - 192
  • [36] Effect of microstructure on the nanomechanical properties of TiVCrZrAl nitride films deposited by magnetron sputtering
    Chang, Zue-Chin
    Liang, Shih-Chang
    Han, Sheng
    [J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2011, 269 (18): : 1973 - 1976
  • [37] Effect of ion assistance on silicon nitride films deposited by reactive magnetron sputtering
    You, Daoming
    Liu, Weihua
    Jiang, Yu
    Cao, Yingchun
    Guo, Wentao
    Tan, Manqing
    [J]. MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2023, 157
  • [38] The effect of sputtering power on structural, mechanical, and electrical properties of Copper Selenide Thermoelectric thin films deposited by magnetron sputtering
    Rapaka, Siva Sankar
    Anwar, Shahid
    Priyadarshini, Barsha
    Anwar, Sharmistha
    [J]. MATERIALS CHEMISTRY AND PHYSICS, 2023, 304
  • [39] Oxygen flow rate effect on copper oxide thin films deposited by radio frequency magnetron sputtering
    Tadjine, Rabah
    Houimi, Amina
    Alim, Mohamed Mounes
    Oudini, Noureddine
    [J]. THIN SOLID FILMS, 2022, 741
  • [40] Thermal annealing effect on zinc nitride thin films deposited by reactive rf-magnetron sputtering process
    Wen, Ting
    Gautam, Madhav
    Soleimanpour, Amir M.
    Jayatissa, Ahalapitiya H.
    [J]. MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2013, 16 (02) : 318 - 325