Influence of TiC additions on the oxidation behaviour of Si3N4-based ceramics

被引:9
|
作者
Opsommer, A
Gomez, E
Castro, F
机构
[1] Ctr Estudios & Invest Tecn Guipuzcoa, Donostia 20009, Spain
[2] Escuela Univ Ingn Tecn Minera, Bizkaia, Spain
关键词
D O I
10.1023/A:1004353218922
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The oxidation behaviour in air of Si3N4 ceramics containing Y2O3 and Al2O3 as sintering aids, with and without a dispersion of TiC particles, has been studied between 1200 and 1400 degrees C. The influence of TiC additions on the oxidation kinetics is discussed in comparison with the results obtained for the Si3N4-Y2O3-Al2O3 reference material. However, in all cases and within the experimental temperature range, the oxidation kinetics were observed to be of a parabolic type. The microstructure of the oxide scales formed, which has been characterized by scanning and transmission electron microscopy, was observed to depend on the oxidation temperature and the initial composition of the material. (C) 1998 Chapman & Hall.
引用
收藏
页码:2583 / 2588
页数:6
相关论文
共 50 条
  • [1] Influence of TiC additions on the oxidation behaviour of Si3N4-based ceramics
    A Opsommer
    E Gomez
    F Castro
    [J]. Journal of Materials Science, 1998, 33 : 2583 - 2588
  • [2] OXIDATION BEHAVIOR OF SI3N4-BASED CERAMICS, STUDIED BY THE THERMOGRAVIMETRIC METHOD
    PERSSON, J
    KALL, PO
    NYGREN, M
    [J]. THERMOCHIMICA ACTA, 1993, 214 (01) : 27 - 31
  • [3] Joining Si3N4-based ceramics with oxidation-formed surface layers
    Plucknett, KP
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2000, 83 (12) : 2925 - 2928
  • [4] Tribological behaviour of Si3N4-based nanocomposites
    Zgalat-Lozynskyy, O.
    Varchenko, V.
    Tischenko, N.
    Ragulya, A.
    Andrzejczuk, M.
    Polotai, A.
    [J]. TRIBOLOGY INTERNATIONAL, 2015, 91 : 85 - 93
  • [5] Development and characterization of nanophase Si3N4-based ceramics
    Bellosi, A
    Monteverde, F
    Botti, S
    Martelli, S
    [J]. SYNTHESIS AND PROPERTIES OF MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, PTS 1 AND 2 - ISMANAM-96, 1997, 235-2 : 255 - 260
  • [6] EDM of Si3N4-based electrical conductive ceramics
    Liu, W.
    Brans, K.
    Kruth, J. P.
    Lauwers, B.
    [J]. PROCEEDINGS OF THE 15TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2007, : 11 - 16
  • [7] Hydrothermal corrosion and flexural strength of Si3N4-based ceramics
    Galuskova, D.
    Kasiarova, M.
    Hnatko, M.
    Galusek, D.
    Dusza, J.
    Sajgalik, P.
    [J]. CORROSION SCIENCE, 2014, 85 : 94 - 100
  • [8] Fabrication of Si3N4-based seal coating on porous Si3N4 ceramics
    Shen, Qiang
    Yang, Ying
    Chen, Fei
    Zhang, Lianmeng
    [J]. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2011, 42 (1-2): : 12 - 20
  • [9] The mechanical and dielectric properties of Si3N4-based sandwich ceramics
    Zuo, Kai-hui
    Zeng, Yu-ping
    Jiang, Dongliang
    [J]. MATERIALS & DESIGN, 2012, 35 : 770 - 773
  • [10] Influence of the deagglomeration procedure on aqueous dispersion, slip casting and sintering of Si3N4-based ceramics
    Oliveira, MILL
    Chen, KX
    Ferreira, JMF
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (9-10) : 1601 - 1607