Hydrothermal corrosion and flexural strength of Si3N4-based ceramics

被引：10

作者：

Galuskova, D. ^{[1
,2
]}

Kasiarova, M. ^{[3
]}

Hnatko, M. ^{[4
]}

Galusek, D. ^{[1
,2
]}

Dusza, J. ^{[3
]}

Sajgalik, P. ^{[4
]}

机构：

[1] TnU AD, Joint Glass Ctr IIC SAS, Trencin, Slovakia

[2] FChET STU, Trencin, Slovakia

[3] Slovak Acad Sci, Inst Mat Res, Kosice, Slovakia

[4] Slovak Acad Sci, Inst Inorgan Chem, Bratislava, Slovakia

来源：

CORROSION SCIENCE | 2014年 / 85卷

关键词：

Ceramic; SEM; Pitting corrosion; SILICON-NITRIDE MATERIALS; PART I; SI3N4-CERAMICS; TEMPERATURE; DEGRADATION; FATIGUE; SI3N4;

D O I：

10.1016/j.corsci.2014.04.005

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Mechanisms of dissolution of silicon nitride ceramics prepared with Y2O3 sintering aid, and of SiAlON ceramics in deionized water and in 0.5 M sodium chloride solution tested in the temperature range between 150 degrees C and 290 degrees C are discussed with respect to their influence on flexural strength of the corroded materials. The corrosion resulted in deterioration of the flexural strength of silicon nitride, which dropped from similar to 700 MPa to similar to 290 MPa after 12 days exposure at 290 degrees C. For SiAlON exposed to deionized water increase of the flexural strength from 190 MPa to similar to 300 MPa was observed. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：94 / 100

页数：7

共 50 条

[1] Development and characterization of nanophase Si3N4-based ceramics
Bellosi, A
Monteverde, F
Botti, S
Martelli, S
[J]. SYNTHESIS AND PROPERTIES OF MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, PTS 1 AND 2 - ISMANAM-96, 1997, 235-2 : 255 - 260
[2] EDM of Si3N4-based electrical conductive ceramics
Liu, W.
Brans, K.
Kruth, J. P.
Lauwers, B.
[J]. PROCEEDINGS OF THE 15TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2007, : 11 - 16
[3] Fabrication of Si3N4-based seal coating on porous Si3N4 ceramics
Shen, Qiang
Yang, Ying
Chen, Fei
Zhang, Lianmeng
[J]. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2011, 42 (1-2): : 12 - 20
[4] Development of advanced AlN and Si3N4-based ceramics with metallic binder and investigation of their corrosion properties
Panasyuk, AD
Lavrenko, VA
[J]. CORROSION OF ADVANCED CERAMICS, 1996, 113 : 59 - 64
[5] The mechanical and dielectric properties of Si3N4-based sandwich ceramics
Zuo, Kai-hui
Zeng, Yu-ping
Jiang, Dongliang
[J]. MATERIALS & DESIGN, 2012, 35 : 770 - 773
[6] Influence of TiC additions on the oxidation behaviour of Si3N4-based ceramics
Opsommer, A
Gomez, E
Castro, F
[J]. JOURNAL OF MATERIALS SCIENCE, 1998, 33 (10) : 2583 - 2588
[7] OXIDATION BEHAVIOR OF SI3N4-BASED CERAMICS, STUDIED BY THE THERMOGRAVIMETRIC METHOD
PERSSON, J
KALL, PO
NYGREN, M
[J]. THERMOCHIMICA ACTA, 1993, 214 (01) : 27 - 31
[8] Influence of TiC additions on the oxidation behaviour of Si3N4-based ceramics
A Opsommer
E Gomez
F Castro
[J]. Journal of Materials Science, 1998, 33 : 2583 - 2588
[9] Effects of raw powders on microstructure and properties of Si3N4-based ceramics
Bellosi, A
Babini, GN
[J]. SCIENCE OF ENGINEERING CERAMICS II, 1999, 2 : 203 - 208
[10] Characterization of R-curve behavior in Si3N4-based ceramics
Gong, JH
Guan, ZD
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 318 (1-2): : 42 - 49

← 1 2 3 4 5 →