Crack Length Influence on Stress Intensity Factors for the Asymmetric Four-point Bending Testing of a Polyurethane Foam

被引：0

作者：

Apostol, Dragos Alexandru ^{[1
]}

Stuparu, Florin ^{[1
]}

Constantinescu, Dan Mihai ^{[1
]}

Marsavina, Liviu ^{[2
]}

Linul, Emanoil ^{[2
]}

机构：

[1] Univ Politehn Bucuresti, Dept Strength Mat, 1-7 Polizu Gh, Bucharest 011061, Romania

[2] Politehn Univ Timisoara, Dept Mech & Strength Mat, Mihai Viteazu Blvd, Timisoara 300222, Romania

来源：

MATERIALE PLASTICE | 2016年 / 53卷 / 02期

关键词：

mixed-mode; polyurethane foams; asymmetric four-point bending; crack length; FRACTURE-TOUGHNESS;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Mixed mode four-point testing is performed on polyurethane foams. This paper presents only the results on the stress intensity factors (SIFs) obtained experimentally for a density of 325 kg/m(3), although tests were done for three foam densities. An asymmetric four-point bending setup was used for determining the critical SIFs in Mode I and Mode II, and discussions on the influence of the initial crack length on the SIF values are done. As initial crack length is increased the theoretical predictions give a better comparison to experimentally obtained results.

引用

页码：280 / 282

页数：3

共 50 条

[41] Determination of the Dynamic Stress Intensity Factor for the Four-Point Bend Impact Test
Ihor V. Rokach
Paweł Łabędzki
International Journal of Fracture, 2009, 160 : 93 - 100
[42] Prediction of stress shielding around implant screws induced by three-point and four-point bending
Baharom, Izzawati
Rojan, Mohd Afendi
Majid, Mohd Shukry Abdul
Zain, Nor Alia Md
Bajuri, Mohd Yazid
MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES, 2019, 15 (04): : 548 - 554
[43] Influence of bending rotations on three and four-point bend end notched flexure tests
Arrese, A.
Mujika, F.
ENGINEERING FRACTURE MECHANICS, 2008, 75 (14) : 4234 - 4246
[44] Stress intensity factors in a finite length cylinder with a circumferential crack
Chen, YZ
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2000, 77 (08) : 439 - 444
[45] Effect of cyclic heating on subcritical crack growth of rock beams under four-point bending test
Wong, Robina H. C.
Chau, K. T.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2021, 138
[46] The Use of Four-Point Bending Notched Beam Fatigue Tests to Rank Crack-Mitigating Interlayers
Wargo, Andrew D.
Safavizadeh, Shayan
Kim, Richard Y.
8TH RILEM INTERNATIONAL SYMPOSIUM ON TESTING AND CHARACTERIZATION OF SUSTAINABLE AND INNOVATIVE BITUMINOUS MATERIALS, 2016, 11 : 359 - 370
[47] Transversely isotropic damage around conducting crack-tip in four-point bending piezoelectric beam
Yang, XH
Dong, L
Wang, C
Chen, CY
Hu, YT
APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, 2005, 26 (04) : 431 - 440
[48] Study on the four-point bending beam method to improve the testing accuracy for the elastic constants of wood
Zheng Wang
Xiaoyu Gu
Sarah Mohrmann
Zhaoyu Shen
Yujie Huang
Yuhao Zhou
European Journal of Wood and Wood Products, 2023, 81 : 1375 - 1385
[49] TRANSVERSELY ISOTROPIC DAMAGE AROUND CONDUCTING CRACK-TIP IN FOUR-POINT BENDING PIEZOELECTRIC BEAM
杨新华
董靓
王乘
陈传尧
胡元太
Applied Mathematics and Mechanics(English Edition), 2005, (04) : 431 - 440
[50] Transversely isotropic damage around conducting crack-tip in four-point bending piezoelectric beam
Yang Xin-hua
Dong Liang
Wang Cheng
Chen Chuan-yao
Hu Yuan-tai
Applied Mathematics and Mechanics, 2005, 26 (4) : 431 - 440

← 1 2 3 4 5 →