Crack Length Influence on Stress Intensity Factors for the Asymmetric Four-point Bending Testing of a Polyurethane Foam

被引：0

作者：

Apostol, Dragos Alexandru ^{[1
]}

Stuparu, Florin ^{[1
]}

Constantinescu, Dan Mihai ^{[1
]}

Marsavina, Liviu ^{[2
]}

Linul, Emanoil ^{[2
]}

机构：

[1] Univ Politehn Bucuresti, Dept Strength Mat, 1-7 Polizu Gh, Bucharest 011061, Romania

[2] Politehn Univ Timisoara, Dept Mech & Strength Mat, Mihai Viteazu Blvd, Timisoara 300222, Romania

来源：

MATERIALE PLASTICE | 2016年 / 53卷 / 02期

关键词：

mixed-mode; polyurethane foams; asymmetric four-point bending; crack length; FRACTURE-TOUGHNESS;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Mixed mode four-point testing is performed on polyurethane foams. This paper presents only the results on the stress intensity factors (SIFs) obtained experimentally for a density of 325 kg/m(3), although tests were done for three foam densities. An asymmetric four-point bending setup was used for determining the critical SIFs in Mode I and Mode II, and discussions on the influence of the initial crack length on the SIF values are done. As initial crack length is increased the theoretical predictions give a better comparison to experimentally obtained results.

引用

页码：280 / 282

页数：3

共 50 条

[1] Particularities of the asymmetric four-point bending testing of polyurethane foams
Apostol, Dragos Alexandru
Constantinescu, Dan Mihai
Marşavina, Liviu
Linul, Emanoil
UPB Scientific Bulletin, Series D: Mechanical Engineering, 2016, 78 (02): : 57 - 66
[2] Asymmetric four-point crack specimen
He, MY
Hutchinson, JW
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 2000, 67 (01): : 207 - 209
[3] Asymmetric four-point crack specimen
He, M.Y., 1600, ASME, Fairfield, NJ, United States (67):
[4] Mode II critical stress intensity factor of wood measured by the asymmetric four-point bending test of single-edge-notched specimen while considering an additional crack length
Yoshihara, Hiroshi
HOLZFORSCHUNG, 2012, 66 (08) : 989 - 992
[5] Study of composite beams in asymmetric four-point bending
Theotokoglou, E. E.
Sideridis, E.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2011, 30 (13) : 1125 - 1137
[6] Stress Intensity Factors and T-Stress Solutions for 3D Asymmetric Four-Point Shear Specimens
Cohen, Mark
Wang, Xin
METALS, 2022, 12 (07)
[7] Mode II Critical Stress Intensity Factor of Medium-Density Fiberboard Measured by Asymmetric Four-Point Bending Tests and Analyses of Kink Crack Formation
Yoshihara, Hiroshi
BIORESOURCES, 2013, 8 (02): : 1771 - 1789
[8] Examination of the Mode II fracture behaviour of wood with a short crack in an asymmetric four-point bending test
Susanti, Cicilia Maria Erna
Nakao, Tetsuya
Yoshihara, Hiroshi
ENGINEERING FRACTURE MECHANICS, 2011, 78 (16) : 2775 - 2788
[9] Computation of mixed mode stress intensity factors in a four-point bend specimen
Shahani, A. R.
Tabatabaei, S. A.
APPLIED MATHEMATICAL MODELLING, 2008, 32 (07) : 1281 - 1288
[10] Creep crack growth measured in tension with a four-point bending device
Fett, T
Martin, G
ENGINEERING FRACTURE MECHANICS, 1997, 56 (03) : 443 - 448

← 1 2 3 4 5 →