Effect of annealing on adhesion of TiB2 films deposited by pulsed magnetron sputtering

被引：15
|
作者：
Arslan, E. [1 ]
Totik, Y. [2 ]
Celik, A. [2 ]
Efeoglu, I. [2 ]
机构：
[1] Ataturk Univ, Vocat Coll Erzurum, Erzurum, Turkey
[2] Ataturk Univ, Dept Mech Engn, Fac Engn, Erzurum, Turkey
来源：
SURFACE ENGINEERING | 2010年 / 26卷 / 08期
关键词：
Titanium diboride; Annealing; Adhesion; Magnetron sputtering; SCRATCH TEST METHOD; HARD COATINGS; TRIBOLOGICAL APPLICATIONS; HEAT-TREATMENT; TIN FILMS; TITANIUM; NITRIDE;
D O I：
10.1179/026708408X383966
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
TiB2 films were deposited on silicon wafers and AISI M2 steel substrates by pulsed dc close field unbalanced magnetron sputtering. The samples were annealed in an inert argon atmosphere at 673, 873 and 1073 K for 1 h. The structural changes due to annealing were evaluated using X-ray diffractometry and scanning electron microscopy. The mechanical properties of the films were characterised by microhardness and scratch tests. The microstructure, microhardness and adhesive strength of the films varied depending on the annealing temperature. While it was observed that the hardness and adhesion strength of TiB2 films annealed at 673 K improved, these properties decreased for the films that were annealed at higher temperatures.
引用
收藏
页码：567 / 570
页数：4
相关论文
共 50 条
  • [21] The substrate effect on mechanical, adhesion and tribological properties of CrCN films deposited by magnetron sputtering
    Keles, Aysenur
    INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2020, 14 (04) : 274 - 287
  • [22] Annealing Temperature Effect on the Microstructure and Adhesion of SiC Films Produced by MF Magnetron Sputtering
    Li, Yangyang
    Hao, Junjie
    Pang, Xiaolu
    APPLICATIONS OF ENGINEERING MATERIALS, PTS 1-4, 2011, 287-290 : 2423 - 2428
  • [23] Adhesion and fatigue properties of Ti/TiB2/MoS2 graded-composite coatings deposited by closed-field unbalanced magnetron sputtering
    Bidev, Faruk
    Baran, Ozlem
    Arslan, Ersin
    Totik, Yasar
    Efeoglu, Ihsan
    SURFACE & COATINGS TECHNOLOGY, 2013, 215 : 266 - 271
  • [24] Raman spectrum and friction behaviors of carbon-doped TiB2 films prepared by magnetron sputtering
    Xu, Xiao-Jing
    Sheng, Xin-Lan
    Zhang, Ti-Feng
    Liu, Min
    Xin, Xi-Ling
    Cailiao Gongcheng/Journal of Materials Engineering, 2012, (08): : 30 - 32
  • [25] Effect of sputtering pressure and post-annealing on hydrophilicity of TiO2 thin films deposited by reactive magnetron sputtering
    Liao, M. C.
    Niu, H.
    Chen, G. S.
    THIN SOLID FILMS, 2010, 518 (24) : 7258 - 7262
  • [26] Annealing Studies on Zinc Oxide Thin Films Deposited by Magnetron Sputtering
    Tingfang Yen
    Dave Strome
    Sung Jin Kim
    Alexander N. Cartwright
    Wayne A. Anderson
    Journal of Electronic Materials, 2008, 37 : 764 - 769
  • [27] Thermal Annealing Behavior of Helium in Ti Films Deposited by Magnetron Sputtering
    Zhang Lei
    He Zhi-Jiang
    Liu Chao-Zhuo
    Wang Xu-Fei
    Shi Li-Qun
    CHINESE PHYSICS LETTERS, 2012, 29 (01)
  • [28] Annealing Induced Morphological Modifications In PTFE Films Deposited By Magnetron Sputtering
    Tripathi, S.
    De, Rajnarayan
    Rao, K. Divakar
    Haque, S. Maidul
    Misal, J. S.
    Prathap, C.
    Das, S. C.
    Ganesan, V.
    Sahoo, N. K.
    61ST DAE-SOLID STATE PHYSICS SYMPOSIUM, 2017, 1832
  • [29] Annealing studies on zinc oxide thin films deposited by magnetron sputtering
    Yen, Tingfang
    Strome, Dave
    Kim, Sung Jin
    Cartwright, Alexander N.
    Anderson, Wayne A.
    JOURNAL OF ELECTRONIC MATERIALS, 2008, 37 (05) : 764 - 769
  • [30] Photocatalytic property of TiO2 films deposited by pulsed DC magnetron sputtering
    Zhang, WJ
    Zhu, SL
    Li, Y
    Wang, FH
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2004, 20 (01) : 31 - 34
12345