Consolidation of Amorphous Al80Fe10Ti5Ni5 Powders by Hot Pressing

被引：3
|
作者：
Tavoosi, M. [1 ,2 ]
Karimzadeh, F. [2 ]
Enayati, M. H. [2 ]
Kim, H. S. [1 ]
机构：
[1] Pohang Univ Sci & Technol POSTECH, Dept Mat Sci & Engn, Pohang 790784, South Korea
[2] IUT, Nanotechnol & Adv Mat Inst, Dept Mat Engn, Esfahan 8415683111, Iran
来源：
JOURNAL OF NANOMATERIALS | 2012年 / 2012卷
基金：
新加坡国家研究基金会;
关键词：
MECHANICAL-PROPERTIES; CRYSTALLIZATION PROCESS; COMPACTION BEHAVIOR; AL; FABRICATION; MICROSTRUCTURES; COMPOSITE; ALLOYS; MODEL;
D O I：
10.1155/2012/814915
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The current study investigates the feasibility of fabricating amorphous Al80Fe10Ti5Ni5 powders by mechanical alloying and consolidating them into bulk samples by a hot-pressing technique. As-milled and hot-pressed samples were examined by X-ray diffraction, scanning electron microscopy, transition electron microscopy, and differential scanning calorimetry. The results showed that milling of Al80Fe10Ti5Ni5 powder for 40 h and hot pressing at 550 degrees C under 600 MPa led to a fully dense bulk sample. During consolidation, an AlTi intermetallic phase with average crystallite size of 10 nm precipitates in the amorphous matrix.
引用
收藏
页数：10
相关论文
共 50 条
  • [41] Amorphous phase formation in Al80Fe10M10 (M = Ni, Ti, and V) ternary systems by mechanical alloying
    Tavoosi, M.
    Karimzadeh, F.
    Enayati, M. H.
    Joo, S. -H.
    Kim, H. S.
    JOURNAL OF MATERIALS SCIENCE, 2011, 46 (23) : 7633 - 7638
  • [42] Heat treatment of amorphous Al85Y5Ni10 and Al85Y10Ni5 alloys
    Chongju Univ, Chongju, Korea, Republic of
    Materials Science and Engineering A, 1997, A226-22 : 178 - 182
  • [43] Heat treatment of amorphous Al85Y5Ni10 and Al85Y10Ni5 alloys
    Kim, WT
    Gogebakan, M
    Cantor, B
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 226 : 178 - 182
  • [44] Fabrication of Ni3Al by hot pressing from element powders
    MENG Jie
    RareMetals, 2007, (03) : 222 - 225
  • [45] Fabrication of Ni3Al by hot pressing from element powders
    Meng Jie
    Jia Chengchang
    He Qing
    RARE METALS, 2007, 26 (03) : 222 - 225
  • [46] The design of hot-isostatic pressing schemes for Ti-5Al-5Mo-5V-3Cr (Ti-5553)
    Perevoshchikova, N.
    Hutchinson, C. R.
    Wu, X.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 657 : 371 - 382
  • [47] Thermal stability of the Al70Ni10Ti10Zr5Ta5 amorphous alloy powder fabricated by mechanical alloying
    Wei, Xiu
    Wang, Xinfu
    Han, Fusheng
    Xie, Haowen
    Wen, Cui'e
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 496 (1-2) : 313 - 316
  • [48] Molecular dynamics simulations of the mechanical behavior of nanostructured and amorphous Al80Ti15Ni5 alloy
    Barboza, Alexandre Melhorance
    Bastos, Ivan Napoleao
    Rodriguez Aliaga, Luis Cesar
    REVISTA FACULTAD DE INGENIERIA-UNIVERSIDAD DE ANTIOQUIA, 2022, (103): : 20 - 33
  • [49] THE CONSOLIDATION KINETICS OF AMORPHOUS NI80P20 POWDER UNDER WARM PRESSING
    BRUSON, A
    MALOUFI, N
    MATERIALS SCIENCE AND ENGINEERING, 1984, 64 (02): : L13 - L17
  • [50] CRYSTALLOGRAPHY OF MARTENSITE IN A CU-10AL-5NI-5FE ALLOY
    HASAN, F
    LORIMER, GW
    RIDLEY, N
    JOURNAL DE PHYSIQUE, 1982, 43 (NC-4): : 653 - 658
12345