Amorphous phase formation in Al80Fe10M10 (M = Ni, Ti, and V) ternary systems by mechanical alloying

被引：14
|
作者：
Tavoosi, M. [1 ,2 ]
Karimzadeh, F. [2 ]
Enayati, M. H. [2 ]
Joo, S. -H. [1 ]
Kim, H. S. [1 ]
机构：
[1] POSTECH Pohang Univ Sci & Technol, Dept Mat Sci & Engn, Pohang 790784, South Korea
[2] Isfahan Univ Technol IUT, Nanotechnol & Adv Mat Inst, Dept Mat Engn, Esfahan 8415683111, Iran
来源：
JOURNAL OF MATERIALS SCIENCE | 2011年 / 46卷 / 23期
关键词：
BEHAVIOR; GLASS; FE; NICKEL;
D O I：
10.1007/s10853-011-5741-z
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, the amorphous phase formation in Al80Fe10M10 (M = Ti, V, Ni) (at.%) ternary systems during mechanical alloying has been investigated. The milled samples were characterized using X-ray diffraction and differential thermal analyses. A thermodynamic analysis of the amorphous phase formation was performed for these systems using the Miedema model. The obtained results demonstrate that amorphous phases can be formed during the mechanical alloying process of the Al80Fe10M10 (M = Ti, V, Ni) ternary systems. The produced amorphous alloys exhibit one-stage crystallization during heating, which is amorphous to the Al13Fe4 intermetallic phases. The thermal stability of the produced amorphous phases decreases in the order of Al80Fe10Ti10 > Al80Fe10Ni10 > Al80Fe10V10.
引用
收藏
页码：7633 / 7638
页数：6
相关论文
共 50 条
  • [1] Amorphous phase formation in Al80Fe10M10 (M = Ni, Ti, and V) ternary systems by mechanical alloying
    M. Tavoosi
    F. Karimzadeh
    M. H. Enayati
    S.-H. Joo
    H. S. Kim
    [J]. Journal of Materials Science, 2011, 46 : 7633 - 7638
  • [2] Formation and characterization of amorphous-nanocrystalline Al80Fe10M10 [M = Fe, Nb, Ti, Ni, (Ni0.5Ti0.5)] alloys
    Tavoosi, M.
    Karimzadeh, F.
    Enayati, M. H.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 551 : 584 - 590
  • [3] MECHANICAL ALLOYING OF THE NI-AL(M) (M TI, FE) SYSTEM
    LIU, ZG
    GUO, JT
    HU, ZQ
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 192 : 577 - 582
  • [4] Formation of nanogranular amorphous phase in rapidly solidified Al-Ti-M (M=V, Fe, Co or Ni) alloys and their mechanical strength
    Kimura, HM
    Sasamori, K
    Negishi, T
    Inoue, A
    [J]. NANOSTRUCTURED MATERIALS, 1997, 8 (07): : 833 - 844
  • [5] MECHANICAL ALLOYING OF NI, CO, AND FE WITH TI - FORMATION OF AN AMORPHOUS PHASE
    DOLGIN, BP
    VANEK, MA
    MCGORY, T
    HAM, DJ
    [J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 1986, 87 (03) : 281 - 289
  • [6] Crystallisation process of Al80Fe10Ti10 amorphous phase
    Tavoosi, M.
    Enayati, M. H.
    Karimzadeh, F.
    [J]. POWDER METALLURGY, 2011, 54 (03) : 445 - 449
  • [7] Nanocomposite formation in the Fe3O4-M (M=Al, Ti) systems by mechanical alloying
    Lee, C. H.
    Lee, S. H.
    Lee, S. J.
    Choa, Y. H.
    Kim, J. S.
    [J]. SCIENCE OF ENGINEERING CERAMICS III, 2006, 317-318 : 623 - 626
  • [8] Phase constitution and magnetic properties of Nd10Fe76B4M10 and Nd10Fe76B2M12 (M = Fe, Ti, V, Cr, Mn, Co and Al) alloys prepared by mechanical alloying
    Liu, W
    Zhang, ZD
    Liu, JP
    Sun, XK
    Sellmyer, DJ
    Zhao, XG
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2000, 221 (03) : 278 - 284
  • [9] FORMATION OF AMORPHOUS Al80Fe20BY MECHANICAL ALLOYING
    WANG Weihua XIAO Keqin CHU Zhaoqin DONG Yuanda Institute of Solid State Physics
    [J]. Acta Metallurgica Sinica(English Letters), 1991, (08) : 93 - 97
  • [10] Nanocomposite formation in the Fe2O3-M (M=Al,Ti,Zn,Cu) systems by mechanical alloying
    Lee, CH
    Lee, SH
    Chun, SY
    Lee, SJ
    Kwon, YS
    [J]. DESIGNING, PROCESSING AND PROPERTIES OF ADVANCED ENGINEERING MATERIALS, PTS 1 AND 2, 2004, 449-4 : 253 - 256
12345