Consolidation of Amorphous Al80Fe10Ti5Ni5 Powders by Hot Pressing

被引：3

作者：

Tavoosi, M. ^{[1
,2
]}

Karimzadeh, F. ^{[2
]}

Enayati, M. H. ^{[2
]}

Kim, H. S. ^{[1
]}

机构：

[1] Pohang Univ Sci & Technol POSTECH, Dept Mat Sci & Engn, Pohang 790784, South Korea

[2] IUT, Nanotechnol & Adv Mat Inst, Dept Mat Engn, Esfahan 8415683111, Iran

来源：

JOURNAL OF NANOMATERIALS | 2012年 / 2012卷

基金：

新加坡国家研究基金会;

关键词：

MECHANICAL-PROPERTIES; CRYSTALLIZATION PROCESS; COMPACTION BEHAVIOR; AL; FABRICATION; MICROSTRUCTURES; COMPOSITE; ALLOYS; MODEL;

D O I：

10.1155/2012/814915

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The current study investigates the feasibility of fabricating amorphous Al80Fe10Ti5Ni5 powders by mechanical alloying and consolidating them into bulk samples by a hot-pressing technique. As-milled and hot-pressed samples were examined by X-ray diffraction, scanning electron microscopy, transition electron microscopy, and differential scanning calorimetry. The results showed that milling of Al80Fe10Ti5Ni5 powder for 40 h and hot pressing at 550 degrees C under 600 MPa led to a fully dense bulk sample. During consolidation, an AlTi intermetallic phase with average crystallite size of 10 nm precipitates in the amorphous matrix.

引用

页数：10

共 50 条

[31] Synthesis of new bulk metallic glassy Ti60Al15Cu10W10Ni5 alloy by hot-pressing the mechanically alloyed powders at the supercooled liquid region
M. Sherif El-Eskandarany
A. Inoue
Metallurgical and Materials Transactions A, 2006, 37 : 2231 - 2238
[32] Bulk high strength Al85La10Ni5 alloy prepared by hot pressing
Li, JC
Zhao, ZK
Jiang, Q
MATERIALS RESEARCH BULLETIN, 2002, 37 (02) : 297 - 304
[33] Crystallization kinetics analysis and SPS consolidation of mechanical alloyed Fe79Ti16P5 amorphous powders
Tang, Cuiyong
Xiao, Zhiyu
Zhuang, Zhefeng
Dai, Wenpan
Meng, Suge
Zhang, Xiang
Chen, Xueyong
APPLIED MECHANICS AND MATERIALS II, PTS 1 AND 2, 2014, 477-478 : 1259 - +
[34] A comparison of field assisted hot pressing and hot isostatic pressing for gas atomized Ti-22Al-26Nb(at.%) and Ti-22Al-26Nb-5B(at.%) powders
Boehlert, C. J.
Sabirov, I
Ruiz-Palenzuela, B.
Cornide, J.
Ruiz-Navas, E. M.
JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 852
[35] Features of the Sintering of Fe-Cu-Sn-Ni and Cu-Ti-Sn-Ni Powders during Hot Pressing
Loladze, N. T.
Tserodze, M. P.
Avalishvili, Z. A.
Dzidzishvili, Iu G.
POWDER METALLURGY AND METAL CERAMICS, 2021, 60 (5-6) : 377 - 384
[36] CRYSTALLIZATION OF AMORPHOUS AL85Y10NI5 AND AL85Y5NI10 ALLOYS
LATUCH, J
MATYJA, H
FADEEVA, VI
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 179 : 506 - 510
[37] Crystallization Behavior of Amorphous Zr55Cu20Ni10Al10Ti5 Alloy
Wang, Jingfu
Wang, Yan
JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS, 2011, 21 (04) : 913 - 918
[38] Crystallization Behavior of Amorphous Zr55Cu20Ni10Al10Ti5 Alloy
Jingfu Wang
Yan Wang
Journal of Inorganic and Organometallic Polymers and Materials, 2011, 21 : 913 - 918
[39] Bulk amorphous and nanocrystalline Al60Fe20Ti20 and Al65Fe18Ti12Ni5 alloys
Krasnowski, M.
MATERIALS LETTERS, 2019, 239 : 113 - 115
[40] Amorphous phase formation in Al80Fe10M10 (M = Ni, Ti, and V) ternary systems by mechanical alloying
M. Tavoosi
F. Karimzadeh
M. H. Enayati
S.-H. Joo
H. S. Kim
Journal of Materials Science, 2011, 46 : 7633 - 7638

← 1 2 3 4 5 →