Suitable specimen dimensions for the determination of mode II fracture toughness of bonded joints by means of the ELS test

被引：9
|
作者：
Perez-Galmes, M. [1 ]
Renart, J. [1 ]
Sarrado, C. [1 ]
Costa, J. [1 ]
机构：
[1] Univ Girona, Carrer Univ Girona, Polytech Sch, AMADE, 4 Campus Montilivi, Girona 17003, Spain
来源：
ENGINEERING FRACTURE MECHANICS | 2018年 / 202卷
关键词：
Toughness testing; Bonded joints; Mode II; ELS; INTERLAMINAR FRACTURE; ADHESIVE JOINTS; BEHAVIOR; COMPOSITE; ENF; DELAMINATION; SIMULATION; DISPLACEMENT; RESISTANCE; FAILURE;
D O I：
10.1016/j.engfracmech.2018.07.039
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The definition of the specimen dimensions in mode II fracture tests of bonded joints, where large Fracture Process Zones (FPZ) occur, is still an issue to be solved. Several conditions shall be met in order to obtain propagation values in bonded joints testing; stability of the test, full FPZ formation, and avoidance of large deflections and adherend failure. This work presents a methodology that indicates the specimen dimensions needed to obtain propagation values in End Loaded Split (ELS) tests. In addition, suitable specimen dimensions for a wide range of thin bonded joints between CFRP adherends is presented, solving the issue of defining suitable specimen dimensions to test adhesives to ensure steady state propagation.
引用
收藏
页码：350 / 362
页数：13
相关论文
共 50 条
  • [41] Mixed mode fracture toughness characterization for interface and interlayer cracks in adhesive bonded joints
    Pang, HLJ
    Bong, SN
    Shi, XQ
    Wang, ZP
    PROCEEDINGS OF INTERNATIONAL SYMPOSIUM ON ELECTRONIC MATERIALS AND PACKAGING, 2000, : 197 - 200
  • [42] The influence of nanoadhesives on the tensile properties and mode-I fracture toughness of bonded joints
    Hedia, H. S.
    Allie, L.
    Ganguli, S.
    Aglan, H.
    ENGINEERING FRACTURE MECHANICS, 2006, 73 (13) : 1826 - 1832
  • [43] Mode I fracture toughness of co-cured and secondary bonded composite joints
    Mohan, J.
    Ivankovic, A.
    Murphy, N.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2014, 51 : 13 - 22
  • [44] Improvement of the tensile properties and mode I fracture toughness of bonded joints using nanoadhesives
    Hedia, Hassan S. M.
    Allie, Lazbourne
    Ganguli, Sabyasachi
    Aglan, Heshmat A.
    MATERIALPRUFUNG, 2006, 48 (05): : 234 - 238
  • [45] Mode i fracture toughness of co-cured and secondary bonded composite joints
    20141117450442
    Murphy, N. (neal.murphy@ucd.ie), 1600, Elsevier Ltd (51):
  • [46] Determination of boundary effect on mode II fracture energy of FRP sheet-to-concrete bonded joints
    Yang, Shutong
    Liu, Yang
    Xu, Xiaoliang
    Gong, Jiazong
    Yang, Chao
    ENGINEERING FRACTURE MECHANICS, 2017, 181 : 130 - 142
  • [47] Mode II fracture toughness determination of rock and concrete via Modified Direct Shear Test
    Vizini, Vitor Oliveira Santos
    Futai, Marcos Massao
    ENGINEERING FRACTURE MECHANICS, 2021, 257
  • [48] ISRM Suggested Method for the Determination of Mode II Fracture Toughness
    Tobias Backers
    Ove Stephansson
    Rock Mechanics and Rock Engineering, 2012, 45 : 1011 - 1022
  • [49] ISRM Suggested Method for the Determination of Mode II Fracture Toughness
    Backers, Tobias
    Stephansson, Ove
    ROCK MECHANICS AND ROCK ENGINEERING, 2012, 45 (06) : 1011 - 1022
  • [50] Measurement of Mode I and Mode II Fracture Properties of Wood-Bonded Joints
    Xavier, J.
    Morais, J.
    Dourado, N.
    de Moura, M. F. S. F.
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2011, 25 (20) : 2881 - 2895
12345