Suitable specimen dimensions for the determination of mode II fracture toughness of bonded joints by means of the ELS test

被引：9
|
作者：
Perez-Galmes, M. [1 ]
Renart, J. [1 ]
Sarrado, C. [1 ]
Costa, J. [1 ]
机构：
[1] Univ Girona, Carrer Univ Girona, Polytech Sch, AMADE, 4 Campus Montilivi, Girona 17003, Spain
来源：
ENGINEERING FRACTURE MECHANICS | 2018年 / 202卷
关键词：
Toughness testing; Bonded joints; Mode II; ELS; INTERLAMINAR FRACTURE; ADHESIVE JOINTS; BEHAVIOR; COMPOSITE; ENF; DELAMINATION; SIMULATION; DISPLACEMENT; RESISTANCE; FAILURE;
D O I：
10.1016/j.engfracmech.2018.07.039
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The definition of the specimen dimensions in mode II fracture tests of bonded joints, where large Fracture Process Zones (FPZ) occur, is still an issue to be solved. Several conditions shall be met in order to obtain propagation values in bonded joints testing; stability of the test, full FPZ formation, and avoidance of large deflections and adherend failure. This work presents a methodology that indicates the specimen dimensions needed to obtain propagation values in End Loaded Split (ELS) tests. In addition, suitable specimen dimensions for a wide range of thin bonded joints between CFRP adherends is presented, solving the issue of defining suitable specimen dimensions to test adhesives to ensure steady state propagation.
引用
收藏
页码：350 / 362
页数：13
相关论文
共 50 条
  • [31] Mode II Fracture Toughness of Bamboo Scrimber with Compact Shear Specimen
    Wu, Guofang
    Zhong, Yong
    Gong, Yingchun
    Ren, Haiqing
    BIORESOURCES, 2018, 13 (01): : 477 - 486
  • [32] Influence of surface micropatterns on the mode I fracture toughness of adhesively bonded joints
    Sun, F.
    Pruncu, C., I
    Penchev, P.
    Jiang, J.
    Dimov, S.
    Blackman, B. R. K.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2020, 103
  • [33] Adhesive thickness effects on the mixed-mode fracture toughness of bonded joints
    Oliveira, J. J. G.
    Campilho, R. D. S. G.
    Silva, F. J. G.
    Marques, E. A. S.
    Machado, J. J. M.
    da Silva, L. F. M.
    JOURNAL OF ADHESION, 2020, 96 (1-4): : 300 - 320
  • [34] Determination of mode II fracture toughness for U-shaped notches using Brazilian disc specimen
    Ayatollahi, M. R.
    Torabi, A. R.
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2010, 47 (3-4) : 454 - 465
  • [35] Pure mode II fracture characterization of composite bonded joints
    de Moura, M. F. S. F.
    Campilho, R. D. S. G.
    Goncalves, J. P. M.
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2009, 46 (06) : 1589 - 1595
  • [36] Influence of surface roughness on the mode II fracture toughness and fatigue resistance of bonded composite-to-steel joints
    Feng, Weikang
    Arouche, Marcio Moreira
    Pavlovic, Marko
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 411
  • [37] Enhanced mode II fracture toughness of secondary bonded joints using tailored sacrificial cracks inside the adhesive
    Wagih, A.
    Lubineau, G.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2021, 204
  • [38] Computational determination of mode II fracture toughness of concrete
    Shawky, A.A.
    Yehia, N.A.B.
    Ibrahim, M.M.
    Journal of Engineering and Applied Science, 2001, 48 (01): : 105 - 120
  • [39] Effects of friction and strain hardening on ELS mode II interlaminar fracture test
    Shi, Chennian
    Xu, Wu
    COMPOSITE STRUCTURES, 2023, 313
  • [40] Effect of the specimen dimensions and the test speed on the fracture toughness of iPP by the essential work of fracture (EWF) method
    Maspoch, ML
    Ferrer, D
    Gordillo, A
    Santana, OO
    Martinez, AB
    JOURNAL OF APPLIED POLYMER SCIENCE, 1999, 73 (02) : 177 - 187
12345