End-Group Functionalization of Poly(3-hexylthiophene) as an Efficient Route to Photosensitize Nanocrystalline TiO2 Films for Photovoltaic Applications

被引:38
|
作者
Krueger, Robin A. [1 ]
Gordon, Terry J. [1 ]
Baumgartner, Thomas [1 ]
Sutherland, Todd C. [1 ]
机构
[1] Univ Calgary, Dept Chem, Calgary, AB T2N 1N4, Canada
基金
加拿大自然科学与工程研究理事会;
关键词
energy conversion; polythiophene; thin films; electrochemistry; mesoporous TiO2; sensitizers; SENSITIZED SOLAR-CELLS; CONJUGATED POLYMERS; ANCHORING GROUP; POLYTHIOPHENE; CATECHOL; LIGHT; RECOMBINATION; ETHYNYLENE); FABRICATION; CONVERSION;
D O I
10.1021/am200262w
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Bulk heterojunction (BHJ) and dye-sensitized solar cells (DSSCs) have seen increased popularity over recent years and each technology has experienced tremendous improvements in power conversion efficiencies (PCEs), reaching 8 and 12%, respectively. The two technologies have been on independent improvement pathways, and this work establishes a link between them by using the archetypical hole conductor (poly-3-hexylthiophene, P3HT) in BHJs as a sensitizer on TiO2 for DSSC applications. Three polymers were synthesized and examined as potential TiO2 sensitizers in DSSCs under AM1.5 solar radiation. Using Grignard metathesis, regioregular P3HT was synthesized then functionalized with either one or two cyanoacrylic acid linker moieties to bind to the TiO2 surface. End-group modification resulted in minimal changes to the optical and electronic properties as compared to pristine P3HT. Cyclic voltammetry (CV) experiments at anodic potentials of adsorbed sensitizer quantified the amount of alkylthiophene adsorbed on the TiO2, whereas under reductive sweeps, cyanoacrylic acid end-group binding was determined. CVs of each polymer indicated that loading was drastically different as compared to pristine P3HT with the lowest loading on TiO2 and monofunctionalized P3HT exhibited the highest loading. The DSSCs showed power conversion efficiencies (PCEs) of 0.1%, 0.2 and 2.2% for the polymer-sensitized TiO2 of the unfunctionalized, monofunctionalized and difunctionalized polymers, respectively. DSSCs were then subjected to electrochemical impedance spectroscopy (EIS) in the dark and under monochromatic light radiation. The large variance in performance for the functionalized-P3HT sensitizers is attributed to differences in the adsorption modes of sensitizer on the TiO2 surface, which in the difunctionalized case limits electrolyte recombination and favors forward charge transfer reactions.
引用
收藏
页码:2031 / 2041
页数:11
相关论文
共 50 条
  • [41] High-performance poly(3-hexylthiophene) top-gate transistors incorporating TiO2 nanocomposite dielectrics
    Yang, Feng-Yu
    Hsu, Meei-Yu
    Hwang, Gue-Wuu
    Chang, Kuo-Jui
    ORGANIC ELECTRONICS, 2010, 11 (01) : 81 - 88
  • [42] Improved charge separation and transport efficiency in poly(3-hexylthiophene)-TiO2 nanorod bulk heterojunction solar cells
    Chang, Chia-Hao
    Huang, Tse-Kai
    Lin, Yu-Ting
    Lin, Yun-Yue
    Chen, Chun-Wei
    Chu, Tsung-Hung
    Su, Wei-Fang
    JOURNAL OF MATERIALS CHEMISTRY, 2008, 18 (19) : 2201 - 2207
  • [43] Photoinduced Charge Transfer in Poly(3-hexylthiophene)/TiO2 Hybrid Inverse Opals: Photonic vs Interfacial Effects
    Tulsiram, Nicholas
    Kerr, Christopher
    Chen, Jennifer I. L.
    JOURNAL OF PHYSICAL CHEMISTRY C, 2017, 121 (48): : 26987 - 26996
  • [44] Effect of atmospheres on the open-circuit photovoltage of nanoporous TiO2/poly(3-hexylthiophene) heterojunction solar cell
    Watanabe, A
    Kasuya, A
    THIN SOLID FILMS, 2005, 483 (1-2) : 358 - 366
  • [45] Characterization and photocatalytic activity of poly(3-hexylthiophene)-modified TiO2 for degradation of methyl orange under visible light
    Wang, Desong
    Zhang, Jie
    Luo, Qingzhi
    Li, Xueyan
    Duan, Yandong
    An, Jing
    JOURNAL OF HAZARDOUS MATERIALS, 2009, 169 (1-3) : 546 - 550
  • [46] Efficient Electron Collection in Hybrid Polymer Solar Cells: In-Situ-Generated ZnO/Poly(3-hexylthiophene) Scaffolded by a TiO2 Nanorod Array
    Liao, Wen-Pin
    Wu, Jih-Jen
    JOURNAL OF PHYSICAL CHEMISTRY LETTERS, 2013, 4 (11): : 1983 - 1988
  • [47] Nanoscale morphology and performance of molecular-weight-dependent poly(3-hexylthiophene)/TiO2 nanorod hybrid solar cells
    Wu, Ming-Chung
    Chang, Chia-Hao
    Lo, His-Hsing
    Lin, Yi-Shen
    Lin, Yun-Yue
    Yen, Wei-Che
    Su, Wei-Fang
    Chen, Yang-Fang
    Chen, Chun-Wei
    JOURNAL OF MATERIALS CHEMISTRY, 2008, 18 (34) : 4097 - 4102
  • [48] Effect of graphene size on the photocatalytic activity of TiO2/poly(3hexylthiophene)/graphene composite films
    Song, Y.
    Massuyeau, F.
    Jiang, L.
    Dan, Y.
    Le Rendu, P.
    Nguyen, T. P.
    CATALYSIS TODAY, 2019, 321 : 74 - 80
  • [49] Photocatalytic activity enhancement of TiO2 nanocrystalline thin film with surface modification of poly-3-hexylthiophene by in situ polymerization
    Liu, Jingting
    Zhang, Jingbo
    JOURNAL OF MATERIALS RESEARCH, 2016, 31 (10) : 1448 - 1455
  • [50] Poly(3-hexylthiophene) Nanoparticles Prepared via a Film Shattering Process and Hybridization with TiO2 for Visible-Light Active Photocatalysis
    Jeongwan Che
    Naraechan Bae
    Juran Noh
    Taehyung Kim
    Pil J. Yoo
    Tae Joo Shin
    Juhyun Park
    Macromolecular Research, 2019, 27 : 427 - 434