End-Group Functionalization of Poly(3-hexylthiophene) as an Efficient Route to Photosensitize Nanocrystalline TiO2 Films for Photovoltaic Applications

被引:38
|
作者
Krueger, Robin A. [1 ]
Gordon, Terry J. [1 ]
Baumgartner, Thomas [1 ]
Sutherland, Todd C. [1 ]
机构
[1] Univ Calgary, Dept Chem, Calgary, AB T2N 1N4, Canada
基金
加拿大自然科学与工程研究理事会;
关键词
energy conversion; polythiophene; thin films; electrochemistry; mesoporous TiO2; sensitizers; SENSITIZED SOLAR-CELLS; CONJUGATED POLYMERS; ANCHORING GROUP; POLYTHIOPHENE; CATECHOL; LIGHT; RECOMBINATION; ETHYNYLENE); FABRICATION; CONVERSION;
D O I
10.1021/am200262w
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Bulk heterojunction (BHJ) and dye-sensitized solar cells (DSSCs) have seen increased popularity over recent years and each technology has experienced tremendous improvements in power conversion efficiencies (PCEs), reaching 8 and 12%, respectively. The two technologies have been on independent improvement pathways, and this work establishes a link between them by using the archetypical hole conductor (poly-3-hexylthiophene, P3HT) in BHJs as a sensitizer on TiO2 for DSSC applications. Three polymers were synthesized and examined as potential TiO2 sensitizers in DSSCs under AM1.5 solar radiation. Using Grignard metathesis, regioregular P3HT was synthesized then functionalized with either one or two cyanoacrylic acid linker moieties to bind to the TiO2 surface. End-group modification resulted in minimal changes to the optical and electronic properties as compared to pristine P3HT. Cyclic voltammetry (CV) experiments at anodic potentials of adsorbed sensitizer quantified the amount of alkylthiophene adsorbed on the TiO2, whereas under reductive sweeps, cyanoacrylic acid end-group binding was determined. CVs of each polymer indicated that loading was drastically different as compared to pristine P3HT with the lowest loading on TiO2 and monofunctionalized P3HT exhibited the highest loading. The DSSCs showed power conversion efficiencies (PCEs) of 0.1%, 0.2 and 2.2% for the polymer-sensitized TiO2 of the unfunctionalized, monofunctionalized and difunctionalized polymers, respectively. DSSCs were then subjected to electrochemical impedance spectroscopy (EIS) in the dark and under monochromatic light radiation. The large variance in performance for the functionalized-P3HT sensitizers is attributed to differences in the adsorption modes of sensitizer on the TiO2 surface, which in the difunctionalized case limits electrolyte recombination and favors forward charge transfer reactions.
引用
收藏
页码:2031 / 2041
页数:11
相关论文
共 50 条
  • [21] Improving poly(3-hexylthiophene)-TiO2 heterojunction solar cells by connecting polypyrrole to the TiO2 nanorods
    Li, Feilong
    Ni, Xiuyuan
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2013, 118 : 109 - 115
  • [22] Poly(3-hexylthiophene)-CdSe Quantum Dot Bulk Heterojunction Solar Cells: Influence of the Functional End-Group of the Polymer
    Palaniappan, Kumaranand
    Murphy, John W.
    Khanam, Nadia
    Horvath, Julius
    Alshareef, Husam
    Quevedo-Lopez, Manuel
    Biewer, Michael C.
    Park, Seong Y.
    Kim, Moon J.
    Gnade, Bruce E.
    Stefan, Mihaela C.
    MACROMOLECULES, 2009, 42 (12) : 3845 - 3848
  • [23] Poly(3-hexylthiophene)-CdSe quantum dot bulk heterojunction solar cells: The influence of the functional end-group of the polymer
    Palaniappan, Kumaranand
    Murphy, John W.
    Sista, Prakash
    Gnade, Bruce E.
    Biewer, Michael C.
    Stefan, Mihaela C.
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2010, 239
  • [24] Interfacial engineering affects the photocatalytic activity of poly(3-hexylthiophene)-modified TiO2
    Huang, Jen-Hsien
    Ibrahem, Mohammed Aziz
    Chu, Chih-Wei
    RSC ADVANCES, 2013, 3 (48) : 26438 - 26442
  • [25] Solution processed TiO2/BiFeO3/poly(3-hexylthiophene) solar cells
    Keskin, Vedat
    Gupta, Arunava
    Szulczewski, Greg
    MATERIALS LETTERS, 2015, 159 : 305 - 308
  • [26] Scanning Kelvin Probe Investigations of TiO2 Nanoparticles/Poly(3-hexylthiophene) Hybrid Blends
    Batra, Yogita
    Rai, Deepa
    Mehta, Bodh Raj
    APPLIED PHYSICS EXPRESS, 2013, 6 (04)
  • [27] IN-SITU POLYMERIZED POLY(3-HEXYLTHIOPHENE) AND TIO2 NANOCOMPOSITES FOR ORGANIC SOLAR CELLS
    Xu, Tingting
    Li, Jing
    Rohwer, Heather
    Hoefelmeyer, James D.
    Galipeau, David
    Qiao, Qiquan
    35TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE, 2010,
  • [28] Photoemission study of the Poly(3-hexylthiophene)/TiO2 interface and the role of 4-Mercaptopyridine
    Calloni, A.
    Berti, G.
    Ferrari, A.
    Brambilla, A.
    Bussetti, G.
    Canesi, E. V.
    Petrozza, A.
    Duo, L.
    THIN SOLID FILMS, 2014, 560 : 39 - 43
  • [29] Nanoscale study of MoSe2/poly(3-hexylthiophene) bulk heterojunctions for hybrid photovoltaic applications
    Letertre, Laurie
    Douheret, Olivier
    Bougouma, Moussa
    Doneux, Thomas
    Lazzaroni, Roberto
    Buess-Herman, Claudine
    Leclere, Philippe
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2016, 145 : 116 - 125
  • [30] Investigations of the polymer alignment, the nonradiative resonant energy transfer, and the photovoltaic response of poly(3-hexylthiophene)/TiO2 hybrid solar cells
    Park, Young Ran
    Lee, You-Jin
    Yu, Chang-Jae
    Kim, Jae-Hoon
    JOURNAL OF APPLIED PHYSICS, 2010, 108 (04)