The effect of the thermo-mechanical processing on the properties of some Al-Fe-Si alloys with high Fe/Si ratio

被引：2
|
作者：
Delijic, K. [1 ]
Asanovic, V. [1 ]
Radonjic, D. [1 ]
机构：
[1] Univ Montenegro, Fac Technol & Met, Podgorica, Montenegro
来源：
RESEARCH TRENDS IN CONTEMPORARY MATERIALS SCIENCE | 2007年 / 555卷
关键词：
Al-Fe-Si sheets; high Fe/Si ratio; mechanical and corrosion properties; thermomechanical processing;
D O I：
10.4028/www.scientific.net/MSF.555.559
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper deals with the effects of thermo-mechanical processing parameters on the properties of two Al-Fe-Si foil alloys. Two twin roll cast alloys with high Fe/Si ratios (Fe/Si approximate to 6) were processed under different combinations of homogenization, deformation and annealing treatments. The influence of small additions of manganese on the mechanical behavior and plastic anisotropy of sheets in hardening and annealing conditions are described. The corrosion resistance of tested sheets in chloride ambience is also presented, because this type of Al foils is dominantly used in the packaging (food) industry and heat exchangers.
引用
收藏
页码：559 / +
页数：2
相关论文
共 50 条
  • [1] Study on the influence of the Si/Fe ratio on the corrosion behaviour of some Al-Fe-Si alloys
    Bhattamishra, Ananta Kumar
    Chattoraj, Indranil
    Basu, Dilip Kumar
    Kumar De, Parimal
    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 2000, 91 (05): : 393 - 396
  • [2] Study on the influence of the Si/Fe ratio on the corrosion behaviour of some Al-Fe-Si alloys
    Bhattamishra, AK
    Chattoraj, I
    Basu, DK
    De, PK
    ZEITSCHRIFT FUR METALLKUNDE, 2000, 91 (05): : 393 - 396
  • [3] Study on the Influence of the Si/Fe Ratio on the Corrosion Behaviour of Some Al-Fe-Si Alloys
    National Metallurgical Laboratory, Jamshedpur
    831007, India
    Int. J. Mater. Res., 1862, 5 (393-396): : 393 - 396
  • [4] Downstream processing of some Al-Fe-Mn-Si and Al-Fe-Si TRC alloys and its influence on sheet/foil properties
    Delijic, K.
    Asanovic, V.
    Radonjic, D.
    RECENT DEVELOPMENTS IN ADVANCED MATERIALS AND PROCESSES, 2006, 518 : 543 - 548
  • [5] Nucleation of phases in Al-Fe-Si alloys
    Univ of Oxford, Oxford, United Kingdom
    Mater Sci Forum, pt 2 (679-684):
  • [6] Nucleation of phases in Al-Fe-Si alloys
    Allen, CM
    OReilly, KAQ
    Cantor, B
    Evans, PV
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 : 679 - 684
  • [7] Precipitation in deformed Al-Fe and Al-Fe-Si dilute alloys
    Tsubakino, H
    Yamamoto, A
    Kato, T
    Suehiro, A
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 2000, 331-3 : 951 - 956
  • [8] Precipitation in deformed Al-Fe and Al-Fe-Si dilute alloys
    Tsubakino, Harushige
    Yamamoto, Atsushi
    Kato, Takeshi
    Suehiro, Akira
    Materials Science Forum, 2000, 331
  • [9] Effect of cooling rate on the solidification behaviour of Al-Fe-Si alloys
    Dutta, B
    Rettenmayr, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 283 (1-2): : 218 - 224
  • [10] Effect of holding time on mechanical properties of Al-Fe-Si/Al in-situ composites
    Zhao, Long-Zhi
    Jiao, Yu
    Zhao, Ming-Juan
    Zhang, Jian
    Hu, Yong
    Xiong, Guang-Yao
    Jiang, Xian
    Cailiao Gongcheng/Journal of Materials Engineering, 2014, (01): : 35 - 40
12345