The effect of the thermo-mechanical processing on the properties of some Al-Fe-Si alloys with high Fe/Si ratio

被引：2
|
作者：
Delijic, K. [1 ]
Asanovic, V. [1 ]
Radonjic, D. [1 ]
机构：
[1] Univ Montenegro, Fac Technol & Met, Podgorica, Montenegro
来源：
RESEARCH TRENDS IN CONTEMPORARY MATERIALS SCIENCE | 2007年 / 555卷
关键词：
Al-Fe-Si sheets; high Fe/Si ratio; mechanical and corrosion properties; thermomechanical processing;
D O I：
10.4028/www.scientific.net/MSF.555.559
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper deals with the effects of thermo-mechanical processing parameters on the properties of two Al-Fe-Si foil alloys. Two twin roll cast alloys with high Fe/Si ratios (Fe/Si approximate to 6) were processed under different combinations of homogenization, deformation and annealing treatments. The influence of small additions of manganese on the mechanical behavior and plastic anisotropy of sheets in hardening and annealing conditions are described. The corrosion resistance of tested sheets in chloride ambience is also presented, because this type of Al foils is dominantly used in the packaging (food) industry and heat exchangers.
引用
收藏
页码：559 / +
页数：2
相关论文
共 50 条
  • [41] Thermodynamic assessment of the Al-Fe-Si system
    Liu, ZK
    Chang, YA
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (04): : 1081 - 1095
  • [42] Thermodynamic assessment of the Al-Fe-Si system
    Zi-Kui Liu
    Y. Austin Chang
    Metallurgical and Materials Transactions A, 1999, 30 : 1081 - 1095
  • [43] Microstructure and mechanical properties of Al-Si-Fe-X alloys
    Skolakova, Andrea
    Novak, Pavel
    Vojtech, Dalibor
    Kubatik, Tomas Frantisek
    MATERIALS & DESIGN, 2016, 107 : 491 - 502
  • [44] Thermo-mechanical processing and the shape memory effect in an Fe-Mn-Si-based shape memory alloy
    Stanford, N
    Dunne, DP
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 422 (1-2): : 352 - 359
  • [45] Correlation between microstructure and corrosion behavior of two Al-Fe-Si alloys
    Yoshikawa, D. S.
    Terada, M.
    Assis, S. L.
    Costa, I.
    Padilha, A. F.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2016, 67 (03): : 286 - 296
  • [46] Enthalpy of formation of Al-Fe-Si alloys (τ5,τ10,τ1,τ9)
    Li, Y
    Ochin, P
    Quivy, A
    Telolahy, P
    Legendre, B
    JOURNAL OF ALLOYS AND COMPOUNDS, 2000, 298 (1-2) : 198 - 202
  • [47] MORPHOLOGY AND KINETICS OF PRECIPITATION PROCESSES IN ALUMINIUM-RICH AL-FE-AND AL-FE-SI ALLOYS
    MIKI, I
    WARLIMON.H
    ZEITSCHRIFT FUR METALLKUNDE, 1968, 59 (04): : 230 - &
  • [48] Intermetallic phase selection during solidification of Al-Fe-Si(-Mg) alloys
    Meredith, MW
    Worth, J
    Hamerton, RG
    ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, 2002, 396-4 : 107 - 112
  • [49] Effect of Si and Zr on the Microstructure and Properties of Al-Fe-Si-Zr Alloys
    Morozova, Anna
    Mogucheva, Anna
    Bukin, Dmitriy
    Lukianova, Olga
    Korotkova, Natalya
    Belov, Nikolay
    Kaibyshev, Rustam
    METALS, 2017, 7 (11):
  • [50] THE FORMATION OF INTERMETALLIC COMPOUNDS DURING SOLIDIFICATION OF DILUTE AL-FE-SI ALLOYS
    LIU, P
    THORVALDSSON, T
    DUNLOP, GL
    ULTRAMICROSCOPY, 1985, 17 (02) : 178 - 178
12345