The effect of the thermo-mechanical processing on the properties of some Al-Fe-Si alloys with high Fe/Si ratio

被引：2
|
作者：
Delijic, K. [1 ]
Asanovic, V. [1 ]
Radonjic, D. [1 ]
机构：
[1] Univ Montenegro, Fac Technol & Met, Podgorica, Montenegro
来源：
RESEARCH TRENDS IN CONTEMPORARY MATERIALS SCIENCE | 2007年 / 555卷
关键词：
Al-Fe-Si sheets; high Fe/Si ratio; mechanical and corrosion properties; thermomechanical processing;
D O I：
10.4028/www.scientific.net/MSF.555.559
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper deals with the effects of thermo-mechanical processing parameters on the properties of two Al-Fe-Si foil alloys. Two twin roll cast alloys with high Fe/Si ratios (Fe/Si approximate to 6) were processed under different combinations of homogenization, deformation and annealing treatments. The influence of small additions of manganese on the mechanical behavior and plastic anisotropy of sheets in hardening and annealing conditions are described. The corrosion resistance of tested sheets in chloride ambience is also presented, because this type of Al foils is dominantly used in the packaging (food) industry and heat exchangers.
引用
收藏
页码：559 / +
页数：2
相关论文
共 50 条
  • [21] The role of cooling rate in the microstructure of Al-Fe-Si alloy with high Fe and Si contents
    Zhang, Yanhua
    Liu, Yongchang
    Han, Yajing
    Wei, Chen
    Gao, Zhiming
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 473 (1-2) : 442 - 445
  • [22] Microstructure and hot cracking susceptibility of high conductivity Al-Fe-Si alloys
    Kim, J. -M.
    Yun, H. -S.
    Park, J. -S.
    Kim, K. -T.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2014, 27 (03) : 141 - 145
  • [23] FORMATION AND CRYSTALLIZATION OF AL-FE-SI AMORPHOUS-ALLOYS
    SUZUKI, RO
    KOMATSU, Y
    KOBAYASHI, KF
    SHINGU, PH
    JOURNAL OF MATERIALS SCIENCE, 1983, 18 (04) : 1195 - 1201
  • [24] Microstructure and Properties of Al-Fe-Si Alloy under Friction Stir Processing
    Chen T.
    Song D.
    Chen S.
    Gong H.
    Chen L.
    Xiyou Jinshu/Chinese Journal of Rare Metals, 2019, 43 (12): : 1275 - 1282
  • [25] The role of cooling rate in the microstructure of Al-Fe-Si alloy with high Fe and Si contents
    Zhang, Yanhua
    Liu, Yongchang
    Han, Yajing
    Wei, Chen
    Gao, Zhiming
    Journal of Alloys and Compounds, 2009, 473 (1-2): : 442 - 445
  • [26] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Fe-Al-Si ALLOYS
    Hausild, Petr
    Cech, Jaroslav
    Karlik, Miroslav
    Prusa, Filip
    Novak, Pavel
    Kopecek, Jaromir
    METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2017, : 1732 - 1737
  • [27] Assessment of thermo-structural properties of Al-Fe and Fe-Si alloys at high temperatures
    Gohivar, R. K.
    Yadav, S. K.
    Koirala, R. P.
    Adhikari, D.
    PHYSICS AND CHEMISTRY OF LIQUIDS, 2021, 59 (05) : 679 - 689
  • [28] Enthalpy of mixing in liquid Al-Fe-Si alloys at 1750 K
    Kanibolotsky, DS
    Bieloborodova, OA
    Kotova, NV
    Lisnyak, VV
    THERMOCHIMICA ACTA, 2003, 408 (1-2) : 1 - 7
  • [29] SOLIDIFICATION OF AN AMORPHOUS PHASE IN RAPIDLY SOLIDIFIED AL-FE-SI ALLOYS
    BENDERSKY, LA
    KAUFMAN, MJ
    BOETTINGER, WJ
    BIANCANIELLO, FS
    MATERIALS SCIENCE AND ENGINEERING, 1988, 98 : 213 - 216
  • [30] Dissolution behavior of Al-Fe-Si alloys at NaOH etching treatment
    Seri, Osami
    Furumata, Kazunao
    Tagashira, Kohsuke
    Keikinzoku/Journal of Japan Institute of Light Metals, 1994, 44 (06): : 315 - 319
12345