EFFECT OF CUTTING PARAMETERS ON SURFACE ROUGHNESS WHEN MILLING HARDENED AISI D2 STEEL (56 HRC) USING TAGUCHI TECHNIQUES

被引：0
|
作者：
Shammari, Ahmed Zaidan Mohammed [1 ]
Amwead, Kamal Ati [1 ]
Hadi, Auday Shaker [2 ]
机构：
[1] Univ Baghdad, Al Khawarizmy Coll Engn, Mfg Operat Engn Dept, Baghdad, Iraq
[2] Univ Technol Baghdad, Dept Mech Engn, Baghdad, Iraq
来源：
INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 3, PTS A-C: DESIGN, MATERIALS, AND MANUFACTURING | 2013年
关键词：
OPTIMIZATION;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tool steel identifying AISI D2 is commonly used for cold working operations, such as sheet metal forming, cold extrusion and forging operation. To perform in these applications, they must have excellent strength, hardness, and wear resistance. The aim of the present study is to find optimal process parameters for end milling of hardened steel AISI D2 (56 HRC) using Taguchi method. A L25 array, Taguchi's signalto-noise ratio and ANOVA are employed to determine effects of many control factors (spindle speed, feed rate, and depth of cut) on surface roughness. In this paper, results show that the spindle speed is most influencing parameters.
引用
收藏
页码：1467 / 1472
页数：6
相关论文
共 50 条
  • [41] Optimization of surface roughness and material removal rate in milling of AISI 1005 carbon steel using Taguchi approach
    Kumar, Sunil
    Saravanan, I
    Patnaik, Lokeswar
    MATERIALS TODAY-PROCEEDINGS, 2020, 22 : 654 - 658
  • [42] Optimization of Cutting Parameters for Surface Roughness in Ball End Milling of Aluminium Epoxy Using Taguchi Method
    Radhwan, H.
    Sharif, S.
    Shayfull, Z.
    Suhaimi, M. A.
    Khushairi, M. T. Mohd
    Najmi, M. R. M.
    5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
  • [43] Optimization of cutting parameters for desirable surface roughness in end-milling hardened AISI H13 steel under a certain metal removal rate
    Ding, T. C.
    Zhang, S.
    Li, Z. M.
    Wang, Y. W.
    HIGH SPEED MACHINING, 2011, 188 : 307 - +
  • [44] Orthogonal cutting of hardened AISI D2 steel with TiAlN-coated inserts—simulations and experiments
    Feng Jiang
    Lan Yan
    Yiming Rong
    The International Journal of Advanced Manufacturing Technology, 2013, 64 : 1555 - 1563
  • [45] Control of tribofilm formation in dry machining of hardened AISI D2 steel by tuning the cutting speed
    Yuan, Junfeng
    Fox-Rabinovich, German S.
    Veldhuis, Stephen C.
    WEAR, 2018, 402 : 30 - 37
  • [46] Predicting surface roughness of hardened AISI 1040 based on cutting parameters using neural networks and multiple regression
    Asiltürk, I. (iasilturk@yahoo.com), 1600, Springer London (63): : 1 - 4
  • [47] Predicting surface roughness of hardened AISI 1040 based on cutting parameters using neural networks and multiple regression
    İlhan Asiltürk
    The International Journal of Advanced Manufacturing Technology, 2012, 63 : 249 - 257
  • [48] Evaluation of the performance of a PCBN tool in turning AISI D2 hardened steel in continuous and interrupted cutting
    Dias, Ernane Felipe
    Barroso, Caio Cesar Goncalves Coutinho
    Silva, Sandro da Costa
    Shigaki, Yukio
    Santos, Sandro Cardoso
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 134 (11-12): : 5657 - 5666
  • [49] Predicting surface roughness of hardened AISI 1040 based on cutting parameters using neural networks and multiple regression
    Asilturk, Ilhan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 63 (1-4): : 249 - 257
  • [50] Design optimization of cutting parameters when turning hardened AISI 4140 steel (63 HRC) with Al2O3+TiCN mixed ceramic tool
    Aslan, Ersan
    Camuscu, Necip
    Birgoren, Burak
    MATERIALS & DESIGN, 2007, 28 (05): : 1618 - 1622
12345