EFFECT OF CUTTING PARAMETERS ON SURFACE ROUGHNESS WHEN MILLING HARDENED AISI D2 STEEL (56 HRC) USING TAGUCHI TECHNIQUES

被引：0
|
作者：
Shammari, Ahmed Zaidan Mohammed [1 ]
Amwead, Kamal Ati [1 ]
Hadi, Auday Shaker [2 ]
机构：
[1] Univ Baghdad, Al Khawarizmy Coll Engn, Mfg Operat Engn Dept, Baghdad, Iraq
[2] Univ Technol Baghdad, Dept Mech Engn, Baghdad, Iraq
来源：
INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 3, PTS A-C: DESIGN, MATERIALS, AND MANUFACTURING | 2013年
关键词：
OPTIMIZATION;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tool steel identifying AISI D2 is commonly used for cold working operations, such as sheet metal forming, cold extrusion and forging operation. To perform in these applications, they must have excellent strength, hardness, and wear resistance. The aim of the present study is to find optimal process parameters for end milling of hardened steel AISI D2 (56 HRC) using Taguchi method. A L25 array, Taguchi's signalto-noise ratio and ANOVA are employed to determine effects of many control factors (spindle speed, feed rate, and depth of cut) on surface roughness. In this paper, results show that the spindle speed is most influencing parameters.
引用
收藏
页码：1467 / 1472
页数：6
相关论文
共 50 条
  • [21] Preheating in End Milling of AISI D2 Hardened Steel with Coated Carbide Inserts
    Lajis, M. A.
    Amin, A. K. M. Nurul
    Karim, A. N. Mustafizul
    Hafiz, A. M. K.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2010, 83-86 : 56 - +
  • [22] The characteristics of cutting forces in the micro-milling of AISI D2 steel
    Cheng-Zhe Jin
    Ik-Soo Kang
    Jin-Hyo Park
    Su-Hoon Jang
    Jeong-Suk Kim
    Journal of Mechanical Science and Technology, 2009, 23 : 2823 - 2829
  • [23] The characteristics of cutting forces in the micro-milling of AISI D2 steel
    Jin, Cheng-Zhe
    Kang, Ik-Soo
    Park, Jin-Hyo
    Jang, Su-Hoon
    Kim, Jeong-Suk
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2009, 23 (10) : 2823 - 2829
  • [24] Modeling and optimization of dead metal zone to reduce cutting forces in micro-milling of hardened AISI D2 steel
    Bachina Harish Babu
    K. Venkata Rao
    B. Satish Ben
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2021, 43
  • [25] Flank wear analysing of high speed end milling for hardened steel D2 using Taguchi Method
    Al-Hazza, Muataz Hazza Faizi
    Ibrahim, Nur Asmawiyah Bt
    Adesta, Erry T. Y.
    Khan, Ahsan Ali
    Sidek, Atiah Bt. Abdullah
    3RD INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND AEROSPACE ENGINEERING 2016, 2017, 184
  • [26] Modeling and optimization of dead metal zone to reduce cutting forces in micro-milling of hardened AISI D2 steel
    Babu, Bachina Harish
    Rao, K. Venkata
    Ben, B. Satish
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2021, 43 (03)
  • [27] Comparative study of surface roughness in milling AISI D2 steel using PVD coated and uncoated tungsten carbide insert
    Redzuwan, B. I.
    Aziz, M. S. A.
    Ayub, M. F.
    Kasim, M. S.
    Izamshah, R.
    Amran, M.
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2015, 2015, : 137 - 138
  • [28] Optimization of WEDM Cutting Parameters on Surface Roughness of 2379 Steel Using Taguchi Method
    Jaafar, Noor Azam
    Abdullah, Ahmad Baharuddin
    Samad, Zahurin
    SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2018, 11 (02) : 97 - 103
  • [29] Comparing surface roughness and tool wear when milling convex surface of hardened steel using different milling strategies
    Pissolatti, A. L.
    Magri, A.
    Antonialli, A. I. S.
    Diniz, A. E.
    MACHINING SCIENCE AND TECHNOLOGY, 2022, 26 (03) : 460 - 485
  • [30] Effect of cutting parameters on surface roughness in turning of annealed AISI-1020 steel
    Zurita, Omar
    Di-Graci, Veronica
    Capace, Maria
    REVISTA FACULTAD DE INGENIERIA, UNIVERSIDAD PEDAGOGICA Y TECNOLOGICA DE COLOMBIA, 2018, 27 (47): : 111 - 118
12345