EFFECT OF CUTTING PARAMETERS ON SURFACE ROUGHNESS WHEN MILLING HARDENED AISI D2 STEEL (56 HRC) USING TAGUCHI TECHNIQUES

被引：0
|
作者：
Shammari, Ahmed Zaidan Mohammed [1 ]
Amwead, Kamal Ati [1 ]
Hadi, Auday Shaker [2 ]
机构：
[1] Univ Baghdad, Al Khawarizmy Coll Engn, Mfg Operat Engn Dept, Baghdad, Iraq
[2] Univ Technol Baghdad, Dept Mech Engn, Baghdad, Iraq
来源：
INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 3, PTS A-C: DESIGN, MATERIALS, AND MANUFACTURING | 2013年
关键词：
OPTIMIZATION;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tool steel identifying AISI D2 is commonly used for cold working operations, such as sheet metal forming, cold extrusion and forging operation. To perform in these applications, they must have excellent strength, hardness, and wear resistance. The aim of the present study is to find optimal process parameters for end milling of hardened steel AISI D2 (56 HRC) using Taguchi method. A L25 array, Taguchi's signalto-noise ratio and ANOVA are employed to determine effects of many control factors (spindle speed, feed rate, and depth of cut) on surface roughness. In this paper, results show that the spindle speed is most influencing parameters.
引用
收藏
页码：1467 / 1472
页数：6
相关论文
共 50 条
  • [31] Design optimization of cutting parameters when turning hardened AISI H11 steel (50 HRC) with CBN7020 tools
    S. Benlahmidi
    H. Aouici
    F. Boutaghane
    A. Khellaf
    B. Fnides
    MA. Yallese
    The International Journal of Advanced Manufacturing Technology, 2017, 89 : 803 - 820
  • [32] Empirical Modeling the Effects of Cutting Parameters in High-Speed End Milling of Hardened AISI D2 under MQL Environment
    Igbal, Asif
    He, Ning
    Li, Liang
    WORLD CONGRESS ON ENGINEERING, WCE 2011, VOL I, 2011, : 734 - 739
  • [33] Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2
    Amin, A. K. M. Nurul
    Dolah, Shuriani Binti
    Mahmud, Marlina Binti
    Lajis, M. A.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 201 (1-3) : 466 - 470
  • [34] Design optimization of cutting parameters when turning hardened AISI H11 steel (50 HRC) with CBN7020 tools
    Benlahmidi, S.
    Aouici, H.
    Boutaghane, F.
    Khellaf, A.
    Fnides, B.
    Yallese, M. A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 89 (1-4): : 803 - 820
  • [35] Experimental investigation of cryogenic cooling on cutting force, surface roughness and tool wear in end milling of hardened AISI D3 steel using uncoated tool
    Ravi, S.
    Gurusamy, P.
    MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 3314 - 3318
  • [36] PREDICTIVE MODELING AND OPTIMIZATION OF CUTTING PARAMETERS IN HIGH SPEED HARDENED TURNING OF AISI D2 STEEL USING RSM, ANN AND DESIRABILITY FUNCTION
    Mabrouk, Hamama
    Mansouri, Salah
    Touggui, Youssef
    Amdah, Hasane
    Yallese, Mohamed Athmane
    Benia, Hadj Mohamed
    SURFACE REVIEW AND LETTERS, 2024, 31 (05)
  • [37] MULTI-CRITERIA OPTIMIZATION IN END MILLING OF AISI D2 HARDENED STEEL USING COATED CARBIDE INSERTS
    Karim, A. N. Mustafizul
    Lajis, M. A.
    Amin, A. K. M. Nurul
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 907 - 912
  • [38] Empirical models and optimal cutting parameters for cutting forces and surface roughness in hard milling of AISI H13 steel
    Ding, Tongchao
    Zhang, Song
    Wang, Yuanwei
    Zhu, Xiaoli
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 51 (1-4): : 45 - 55
  • [39] Empirical models and optimal cutting parameters for cutting forces and surface roughness in hard milling of AISI H13 steel
    Tongchao Ding
    Song Zhang
    Yuanwei Wang
    Xiaoli Zhu
    The International Journal of Advanced Manufacturing Technology, 2010, 51 : 45 - 55
  • [40] Surface Integrity in Abrasive Flow Machining of Hardened Tool Steel AISI D2
    Kenda, J.
    Pusavec, F.
    Kermouche, G.
    Kopac, J.
    1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2011, 19
12345