EFFECT OF CUTTING PARAMETERS ON SURFACE ROUGHNESS WHEN MILLING HARDENED AISI D2 STEEL (56 HRC) USING TAGUCHI TECHNIQUES

被引：0
|
作者：
Shammari, Ahmed Zaidan Mohammed [1 ]
Amwead, Kamal Ati [1 ]
Hadi, Auday Shaker [2 ]
机构：
[1] Univ Baghdad, Al Khawarizmy Coll Engn, Mfg Operat Engn Dept, Baghdad, Iraq
[2] Univ Technol Baghdad, Dept Mech Engn, Baghdad, Iraq
来源：
INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 3, PTS A-C: DESIGN, MATERIALS, AND MANUFACTURING | 2013年
关键词：
OPTIMIZATION;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tool steel identifying AISI D2 is commonly used for cold working operations, such as sheet metal forming, cold extrusion and forging operation. To perform in these applications, they must have excellent strength, hardness, and wear resistance. The aim of the present study is to find optimal process parameters for end milling of hardened steel AISI D2 (56 HRC) using Taguchi method. A L25 array, Taguchi's signalto-noise ratio and ANOVA are employed to determine effects of many control factors (spindle speed, feed rate, and depth of cut) on surface roughness. In this paper, results show that the spindle speed is most influencing parameters.
引用
收藏
页码：1467 / 1472
页数：6
相关论文
共 50 条
  • [1] Surface Roughness Optimization Using Taguchi Method of High Speed End Milling For Hardened Steel D2
    Al-Hazza, Muataz Hazza Faizi
    Ibrahim, Nur Asmawiyah Bt
    Adesta, Erry T. Y.
    Khan, Ahsan Ali
    Sidek, Atiah Bt. Abdullah
    3RD INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND AEROSPACE ENGINEERING 2016, 2017, 184
  • [2] High speed end milling of hardened AISI D2 tool steel (∼58 HRC)
    Koshy, P
    Dewes, RC
    Aspinwall, DK
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 127 (02) : 266 - 273
  • [3] The effect of cutting parameters on tool wear in end milling of AISI D2 tool steel
    Luqman, N. H. J.
    Shukor, S. Mohd
    Hadzley, M.
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2017 (MERD), 2017, : 124 - 125
  • [4] The Optimization of Machining Parameters Using the Taguchi Method for Surface Roughness of AISI 8660 Hardened Alloy Steel
    Motorcu, Ali Rizzi
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2010, 56 (06): : 391 - 401
  • [5] The optimization of machining parameters using the taguchi method for surface roughness of an AISI 8660 hardened alloy steel
    Motorcu, Ali Riza
    Strojniski Vestnik/Journal of Mechanical Engineering, 2010, 56 (06):
  • [6] The effectiveness of coatings when turning hardened cold work tool steel AISI D2 (60 HRC)
    Universiti Teknologi Malaysia, UTM Skudai, Johor Bahru 81310, Malaysia
    不详
    Int. J. Mach. Mach. Mater., 2008, 1 (63-75):
  • [7] Micro-Milling of Hardened AISI D2 Tool Steel
    Saedon, J. B.
    Soo, S. L.
    Aspinwall, D. K.
    Barnacle, A.
    MATERIALS AND MANUFACTURING TECHNOLOGIES XIV, 2012, 445 : 62 - +
  • [8] Surface Integrity in the Grinding of Hardened AISI D2 Steel
    Zhang, Tao
    Wang, Qianting
    Wang, Ningchang
    Yan, Lan
    Jiang, Feng
    Zhang, Enlai
    Zhou, Wuhui
    Gao, Hao
    Wang, Yong
    MATERIALS, 2025, 18 (04)
  • [9] Prediction and Optimization of Tool Life in Micromilling AISI D2 (∼62 HRC) Hardened Steel
    Saedon, J. B.
    Soo, S. L.
    Aspinwall, D. K.
    Barnacle, A.
    Saad, N. H.
    INTERNATIONAL SYMPOSIUM ON ROBOTICS AND INTELLIGENT SENSORS 2012 (IRIS 2012), 2012, 41 : 1674 - 1683
  • [10] Optimization of Machining Parameters to Minimize Surface Roughness During End Milling of AISI D2 Tool Steel Using Genetic Algorithm
    Patel, Ravikumar D.
    Bhavsar, Sanket N.
    ADVANCES IN MATERIALS AND MANUFACTURING ENGINEERING, ICAMME 2019, 2020, : 231 - 238
12345