Development Motor Control Unit for Electronic Steering System Test Rig

被引:0
|
作者
Nasir, Mohd Zakaria Mohammad [1 ]
Dwijotomo, Abdurahman [1 ]
Abdullah, Mohd Azman [2 ]
Tamaldin, Noreffendy [2 ]
机构
[1] Univ Tekn Malaysia Melaka, Fac Mech Engn, Dept Automot, Ayer Keroh, Melaka, Malaysia
[2] Univ Tekn Malaysia Melaka, Fac Mech Engn, Ayer Keroh, Melaka, Malaysia
关键词
Rack and pinion; Steering; HIL; PID;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The steer-by-wire system in a passenger car used to enhance vehicle steering has been undergoing worldwide development. A new electronic rack and pinion steering system (SBW) along with Electronic Control Unit (ECU) is developed in this paper by using 1 DC motor and 2 sensors. A Hardware-in-the-loop steering system test rig which DC motor is attached into actual rack and pinion steering has been set up. Moreover, an ECU consists of microcontroller and H bridge motor driver is designed to support the system. The proposes PID controller is performed on electric steering system to compensate a conventional mechanical linkages. Based on position tracking experiment, it shows a hardware and electric circuit designed with proposed controller is effectively control the desired input for vehicle manoeuvre.
引用
收藏
页码:42 / 47
页数:6
相关论文
共 50 条
  • [31] IMPROVED ELECTRONIC CONTROL UNIT FOR A MOTOR TYPE BEAM SCANNER
    BOVING, R
    ELSKENS, M
    NUCLEAR INSTRUMENTS & METHODS, 1971, 93 (02): : 391 - &
  • [32] Development of robust motor servo control for rear steering actuator based on the two-degree-of-freedom control system
    Kuzuya, H
    Shin, S
    MECHATRONICS, 2000, 10 (1-2) : 53 - 66
  • [33] Development of robust motor servo control for rear steering actuator based on two-degree-of-freedom control system
    Kuzuya, H
    Shin, S
    INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2002, 29 (1-2) : 51 - 64
  • [34] Design of steering control system for rice transplanter equipped with steering wheel-like motor
    He J.
    Zhu J.
    Luo X.
    Zhang Z.
    Hu L.
    Gao Y.
    Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2019, 35 (06): : 10 - 17
  • [36] System structure identification and adaptive control of a seismic isolator test rig
    Di Massa, Giandomenico
    Russo, Riccardo
    Strano, Salvatore
    Terzo, Mario
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2013, 40 (02) : 736 - 753
  • [37] Development of Electronic Control Unit for Air Suspension with Fuzzy Control
    Can, Chen
    FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING II, PTS 1 AND 2, 2014, 457-458 : 774 - 777
  • [38] IMPROVED TEST RIG DESIGN FOR VIBRATION CONTROL OF A ROTOR BEARING SYSTEM
    Haidl, Peter
    Buchroithner, Armin
    Bader, Michael
    Zisser, Michael
    Schweighofer, Bernhard
    Wegleiter, Hannes
    PROCEEDINGS OF THE 23RD INTERNATIONAL CONGRESS ON SOUND AND VIBRATION: FROM ANCIENT TO MODERN ACOUSTICS, 2016,
  • [39] A low cost, portable engine electronic control unit hardware-in-the-loop test system
    Çebi, A
    Güvenç, L
    Demirci, M
    Karadeniz, CK
    Kanar, K
    Güraslan, E
    ISIE 2005: Proceedings of the IEEE International Symposium on Industrial Electronics 2005, Vols 1- 4, 2005, : 293 - 298
  • [40] Design and Test Evaluation of Full Authority Digital Electronic Control System for an Auxiliary Power Unit
    Peng K.
    Yang F.
    Fan D.
    Gou L.
    Xiao H.
    Jiao C.
    Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University, 2018, 36 (06): : 1102 - 1107