FRACTURE TEST OF ALUMINUM ALLOY PLATES WITH ELLIPTICAL HOLE

被引：0
|
作者：
Wang, W. Z. [1 ]
Su, R. Q. [2 ]
Ji, H. T. [3 ]
Wang, X. T. [1 ]
机构：
[1] Ningbo Univ, Ningbo, Zhejiang, Peoples R China
[2] Shanxi Railway Inst, Xian, Shaanxi, Peoples R China
[3] Lanzhou Univ Technol, Lanzhou, Gansu, Peoples R China
来源：
PROCEEDINGS OF THE 12TH INTERNATIONAL CONFERENCE ON INSPECTION APPRAISAL REPAIRS AND MAINTENANCE OF STRUCTURES, VOLS 1 AND 2 | 2010年
关键词：
aluminum alloy; plate with hole; crack; fracture mode; MECHANISMS;
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
17 aluminum alloy plates with elliptical hole were tested in the simple tension fracture experiment. The load-displacement curves were recorded accurately. The effect of the ratio of the major axis to the minor axis of elliptical hole on the fracture ductility and fracture mode was studied. The experimental results showed that the macro-crack was initiated at the inner side of the edge of major axis of elliptical hole, and quickly expanded vertically the direction of loading until the specimen fractured. Fracture section was dark gray. Fracture mode was combination of shear and normal fracture. The smaller ratio value was; the higher the fracture ductility was. Fracture load located at the descending branch of load-displacement curve.
引用
收藏
页码：173 / +
页数：2
相关论文
共 50 条
  • [1] Fracture Test on High Strength Steel Plates with Elliptical Hole
    Wang, Wanzhen
    Huang, Youqian
    Su, Renquan
    Wang, Xintang
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, PTS 1-4, 2011, 44-47 : 2647 - +
  • [2] Fatigue Fracture Analysis of Composite Plates With an Elliptical Hole
    B. Kielbasa
    P. Balon
    A. Swiatoniowski
    J. Szostak
    Strength of Materials, 2017, 49 : 500 - 513
  • [3] FATIGUE FRACTURE ANALYSIS OF COMPOSITE PLATES WITH AN ELLIPTICAL HOLE
    Kielbasa, B.
    Balon, P.
    Swiatoniowski, A.
    Szostak, J.
    STRENGTH OF MATERIALS, 2017, 49 (04) : 500 - 513
  • [4] Anisotropy of fracture toughness of 2124 aluminum alloy plates
    Jian Haigen
    Luo Jian
    Liu Zheng
    Tang Xianmin
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON ADVANCED DESIGN AND MANUFACTURING ENGINEERING, 2015, 39 : 1548 - 1551
  • [5] Fracture analysis of plates with elliptical hole fabricated from Q235 steel
    Wang, Wanzhen
    Ji, Haitao
    ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 1410 - +
  • [6] Aluminum alloy plate with a hole fracture experiment and numerical analysis
    Duan, Cuifang
    Li, Wei
    Zhang, Jiliang
    ADVANCED RESEARCH ON CIVIL ENGINEERING AND MATERIAL ENGINEERING, 2012, 568 : 315 - 319
  • [7] FRACTURE CRITERION FOR THE TENSILE TEST OF 7075 ALUMINUM ALLOY
    Chen, D. C.
    You, C. S.
    STRENGTH OF MATERIALS, 2015, 47 (01) : 122 - 127
  • [8] Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy
    D. C. Chen
    C. S. You
    Strength of Materials, 2015, 47 : 122 - 127
  • [9] Strength Prediction for Composite Plates with an Inclined Elliptical Hole
    Lin, M. J.
    Tsai, K. H.
    Hwan, C. L.
    MECHANICS OF COMPOSITE MATERIALS, 2020, 56 (05) : 619 - 628
  • [10] Strength Prediction for Composite Plates with an Inclined Elliptical Hole
    M. J. Lin
    K. H. Tsai
    C. L. Hwan
    Mechanics of Composite Materials, 2020, 56 : 619 - 628
12345