Al effect on the structure of the spray formed Fe88Si12 (at%) alloy

被引：2

作者：

Saporiti, F. ^{[1
]}

Kasama, A. H. ^{[2
]}

Arcondo, B. ^{[3
]}

Botta, W. J. ^{[2
]}

Kiminami, C. S. ^{[2
]}

Bolfarini, C. ^{[2
]}

Audebert, F. ^{[1
]}

机构：

[1] Univ Buenos Aires, Fac Ingn, Grp Mat Avanzados, Paseo Colon 850, RA-1063 Buenos Aires, DF, Argentina

[2] Univ Fed Sao Carlos, Dept Mat Engn, BR-13565905 Sao Carlos, SP, Brazil

[3] Univ Buenos Aires, Fac Ingn, Dept Fis, Buenos Aires, DF, Argentina

来源：

METASTABLE AND NANOSTRUCTURED MATERIALS III | 2008年 / 570卷

关键词：

Fe-Si; Fe-Si-Al; spray-forming; Mossbauer;

D O I：

10.4028/www.scientific.net/MSF.570.150

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Fe-Si alloys have excellent soft magnetic properties, specially around 12 at% Si. However, its industrial application is limited because of the lack of ductility, which causes cracking during rolling operations for the fabrication of thin sheets. The reason of the brittleness of the high silicon alloys is a disorder/order reaction at low temperatures. The aim of this work is to analyze the effect of the addition of Aluminum on the crystalline structure of Fe-Si alloys. Samples with a chemical composition of Fe88Si12 and Fe87Si12Al1 (at%) were prepared by Spray Forming. The structure was studied by means of X-ray diffraction and Mossbauer Spectroscopy. The presence of the DO3 and alpha-Fe phases were observed.

引用

页码：150 / +

页数：3

共 50 条

[41] Microstructure evolution of Al-Si-Fe alloy during spray Conform
Li, Yanfei
Yin, Jiancheng
Zhong, Yi
MATERIALS LETTERS, 2021, 291
[42] Effect of in situ TiC particulate on the microstructure of spray deposited Al-20Si-5Fe alloy
Yang, B.
Wang, F.
Huang, Z.J.
Duan, X.J.
Zhang, J.S.
Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2001, 23 (01):
[43] Investigation on Over-spray Powder of Spray Formed Al-22Si-5Fe-4Mn-3Cu-1Mg alloy
Kang, Fuwei
Li, Haichao
Jia, Yandong
Sun, Jianfei
Zhang, Xinghong
MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 2245 - +
[44] Microstructures variation of spray formed Si-30%Al alloy during densification process
Wei Yan-guang
Xiong Bai-qing
Zhang Yong-an
Liu Hong-wei
Wang Feng
Zhu Bao-hong
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 : S1570 - S1573
[45] Microstructures variation of spray formed Si-30%Al alloy during densification process
魏衍广
熊柏青
张永安
刘红伟
王锋
朱宝宏
Transactions of Nonferrous Metals Society of China, 2006, (S3) : 1570 - 1573
[46] Production and properties of a spray formed 70% Si-Al alloy for electronic packaging applications
Yu, Kun
Li, Chao
Wang, Richu
Yang, Jun
MATERIALS TRANSACTIONS, 2008, 49 (03) : 685 - 687
[47] Microstructural features and mechanical properties of spray -formed hypereutectic Al-Si-Ti alloy
Khaji, Saiyad Hasan
Goudar, Dayanand M.
Haider, Julfikar
Raju, K.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2024,
[48] Evolution of microstructure and its effect on wear and mechanical properties of spray cast Al-12Si alloy
Raju, K.
Harsha, A. P.
Ojha, S. N.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (25-26): : 7723 - 7728
[49] Microstructural evolution of spray formed 7075 Al alloy
Jeyakumar, M
Kumar, S
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2005, 58 (04) : 617 - 623
[50] EFFECT OF CR, SI AND AL CONTENTS ON PROPERTIES OF FE-CR-SI-AL ALLOY
YANAGITANI, A
TANAKA, Y
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 24 (01) : B27 - B27

← 1 2 3 4 5 →