Al effect on the structure of the spray formed Fe88Si12 (at%) alloy

被引：2

作者：

Saporiti, F. ^{[1
]}

Kasama, A. H. ^{[2
]}

Arcondo, B. ^{[3
]}

Botta, W. J. ^{[2
]}

Kiminami, C. S. ^{[2
]}

Bolfarini, C. ^{[2
]}

Audebert, F. ^{[1
]}

机构：

[1] Univ Buenos Aires, Fac Ingn, Grp Mat Avanzados, Paseo Colon 850, RA-1063 Buenos Aires, DF, Argentina

[2] Univ Fed Sao Carlos, Dept Mat Engn, BR-13565905 Sao Carlos, SP, Brazil

[3] Univ Buenos Aires, Fac Ingn, Dept Fis, Buenos Aires, DF, Argentina

来源：

METASTABLE AND NANOSTRUCTURED MATERIALS III | 2008年 / 570卷

关键词：

Fe-Si; Fe-Si-Al; spray-forming; Mossbauer;

D O I：

10.4028/www.scientific.net/MSF.570.150

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Fe-Si alloys have excellent soft magnetic properties, specially around 12 at% Si. However, its industrial application is limited because of the lack of ductility, which causes cracking during rolling operations for the fabrication of thin sheets. The reason of the brittleness of the high silicon alloys is a disorder/order reaction at low temperatures. The aim of this work is to analyze the effect of the addition of Aluminum on the crystalline structure of Fe-Si alloys. Samples with a chemical composition of Fe88Si12 and Fe87Si12Al1 (at%) were prepared by Spray Forming. The structure was studied by means of X-ray diffraction and Mossbauer Spectroscopy. The presence of the DO3 and alpha-Fe phases were observed.

引用

页码：150 / +

页数：3

共 50 条

[31] Effect of the addition of Mn on the tensile properties of a spray-formed and extruded Al-9Si-4Cu-1Fe alloy
Benetti, G. D.
Jorge, A. M., Jr.
Kiminami, C. S.
Botta, W. J.
Bolfarini, C.
13TH INTERNATIONAL CONFERENCE ON RAPIDLY QUENCHED AND METASTABLE MATERIALS, 2009, 144
[32] Microstructural features and heat flow analysis of atomized and spray-formed Al-Fe-V-Si alloy
A. K. Srivastava
S. N. Ojha
S. Ranganathan
Metallurgical and Materials Transactions A, 1998, 29 : 2205 - 2219
[33] Microstructural features and heat flow analysis of atomized and spray-formed Al-Fe-V-Si alloy
Srivastava, AK
Ojha, SN
Ranganathan, S
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1998, 29 (08): : 2205 - 2219
[34] Microstructural features and heat flow analysis of atomized and spray-formed Al-Fe-V-Si alloy
Indian Inst of Science, New Delhi, India
Metall Mat Trans A Phys Metall Mat Sci, 8 (2205-2219):
[35] Pressure effect on the phase transformations and structure of an Al-12 at % Si alloy
A. G. Padalko
E. V. Dedyaeva
T. K. Akopyan
G. V. Talanova
L. I. Shvorneva
G. I. Zubarev
V. T. Fedotov
A. N. Suchkov
Inorganic Materials, 2014, 50 : 667 - 672
[36] Pressure Effect on the Phase Transformations and Structure of an Al-12 at % Si Alloy
Padalko, A. G.
Dedyaeva, E. V.
Akopyan, T. K.
Talanova, G. V.
Shvorneva, L. I.
Zubarev, G. I.
Fedotov, V. T.
Suchkov, A. N.
INORGANIC MATERIALS, 2014, 50 (07) : 667 - 672
[37] Effect of P/M value on the preforms and microstructures of spray formed 70Si30Al alloy
Wei, Yanguang
Xiong, Baiqing
Zhang, Yongan
Liu, Hongwei
Wang, Feng
Zhu, Baohong
JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2007, 14 (02): : 141 - 145
[38] Microstructural characterization of spray formed Al-9Si-3Cu-1Fe and Al-9Si-3Cu-1Fe+Al-4Si-4Feco-deposited alloy
Bereta, LA
Kiminami, CS
Botta, WJ
Bolfarini, C
METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, 2005, 24-25 : 627 - 630
[39] Transient temperatures and microstructure of spray formed aluminium alloy Al-Si sheets
Achelis, L.
Uhlenwinkel, V.
Ristau, R.
Krug, P.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2010, 41 (07) : 498 - 503
[40] Hot deformation behavior of spray formed Al-22Si-5Fe-3Cu-1Mg alloy
Jia Yan-dong
Cao Fu-yang
Ning Zhi-liang
Sun Xiao-bing
Sun Jian-fei
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 : S299 - S303

← 1 2 3 4 5 →