A comparison of tensile properties and corrosion behavior of cast Ti-7.5Mo with c.p. Ti, Ti-15Mo and Ti-6Al-4V alloys

被引：115
|
作者：
Ho, Wen-Fu [1 ]
机构：
[1] Da Yeh Univ, Dept Mat Sci & Engn, Dacun 51591, Changhua, Taiwan
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2008年 / 464卷 / 1-2期
关键词：
dental alloys; microstructure; mechanical properties; corrosion;
D O I：
10.1016/j.jallcom.2007.10.054
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The purpose of this Study was to compare the tensile properties and the corrosion behavior of a newly developed Ti-7.5Mo alloy with that of c.p. Ti, Ti-15Mo and Ti-6Al-4V alloys in their as-cast state. The experimental results indicated that the modulus of the Ti-7.5Mo alloy (70GPa) was lower than that of Ti-15Mo by 17%, of c.p. Ti by 36% and of Ti-6Al-4V by 38%. The Ti-7.5Mo alloy had excellent corrosion resistance similar to that of c.p. Ti in view of the passive Current density. The Ti-15Mo alloy had corrosion resistance somewhat lower than c.p. Ti. These results can be correlated with that the amount of Mo in the outer layers of Ti-7.5Mo was smaller than the amount in Ti-15Mo. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：580 / 583
页数：4
相关论文
共 50 条
  • [41] Fretting and galvanic corrosion behaviors and mechanisms of Co-Cr-Mo and Ti-6Al-4V alloys
    He, DX
    Zhang, TC
    Wu, YS
    WEAR, 2001, 249 (10-11) : 883 - 891
  • [42] High-temperature corrosion of Ti and Ti-6Al-4V alloy
    Du, HL
    Datta, PK
    Lewis, DB
    BurnellGray, JS
    OXIDATION OF METALS, 1996, 45 (5-6): : 507 - 527
  • [43] Chemical Milling of Cast Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo Alloys in Hydrofluoric-Nitric Acid Solutions
    Sefer, Birhan
    Dobryden, Illia
    Almqvist, Nils
    Pederson, Robert
    Antti, Marta-Lena
    CORROSION, 2017, 73 (04) : 394 - 407
  • [44] Plastic behavior of the α′ phase in Ti-6Al-4V alloys
    Castioni, Florian
    Cazottes, Sophie
    Rollett, Anthony D.
    Dancette, Sylvain
    MATERIALS LETTERS, 2021, 283
  • [45] Sintering properties of Ti-6Al-4V-xMo powder prepared by addition of Mo to Ti-6Al-4V scraps and subsequent pulverization
    Oh, Jung-Min
    Roh, Ki-Min
    Kwon, Hanjung
    Lim, Jae-Won
    METALS AND MATERIALS INTERNATIONAL, 2017, 23 (06) : 1139 - 1143
  • [46] Influence of plastic deformation on the microstructure and corrosion behaviour of Ti-10Mo-4Zr and Ti-6Al-4V alloys in the Ringer's solution at 37 °C
    Krawiec, H.
    Vignal, V.
    Loch, J.
    Erazmus-Vignal, P.
    CORROSION SCIENCE, 2015, 96 : 160 - 170
  • [47] Sintering properties of Ti-6Al-4V-xMo powder prepared by addition of Mo to Ti-6Al-4V scraps and subsequent pulverization
    Jung-Min Oh
    Ki-Min Roh
    Hanjung Kwon
    Jae-Won Lim
    Metals and Materials International, 2017, 23 : 1139 - 1143
  • [48] Effects of boron on the fracture behavior and ductility of cast Ti-6Al-4V alloys
    Luan, J. H.
    Jiao, Z. B.
    Heatherly, L.
    George, E. P.
    Chen, G.
    Liu, C. T.
    SCRIPTA MATERIALIA, 2015, 100 : 90 - 93
  • [49] Composition formulas of Ti alloys derived by interpreting Ti-6Al-4V
    LIU TianYu
    ZHANG Shuang
    WANG Qing
    MIN XiaoHua
    DONG Chuang
    Science China(Technological Sciences), 2021, 64 (08) : 1732 - 1740
  • [50] Corrosion behavior of Ti-8Al-1Mo-1V alloy compared to Ti-6A1-4V
    Atapour, M.
    Pilchak, A. L.
    Shamanian, M.
    Fathi, M. H.
    MATERIALS & DESIGN, 2011, 32 (03) : 1692 - 1696
12345