A comparison of tensile properties and corrosion behavior of cast Ti-7.5Mo with c.p. Ti, Ti-15Mo and Ti-6Al-4V alloys

被引：115
|
作者：
Ho, Wen-Fu [1 ]
机构：
[1] Da Yeh Univ, Dept Mat Sci & Engn, Dacun 51591, Changhua, Taiwan
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2008年 / 464卷 / 1-2期
关键词：
dental alloys; microstructure; mechanical properties; corrosion;
D O I：
10.1016/j.jallcom.2007.10.054
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The purpose of this Study was to compare the tensile properties and the corrosion behavior of a newly developed Ti-7.5Mo alloy with that of c.p. Ti, Ti-15Mo and Ti-6Al-4V alloys in their as-cast state. The experimental results indicated that the modulus of the Ti-7.5Mo alloy (70GPa) was lower than that of Ti-15Mo by 17%, of c.p. Ti by 36% and of Ti-6Al-4V by 38%. The Ti-7.5Mo alloy had excellent corrosion resistance similar to that of c.p. Ti in view of the passive Current density. The Ti-15Mo alloy had corrosion resistance somewhat lower than c.p. Ti. These results can be correlated with that the amount of Mo in the outer layers of Ti-7.5Mo was smaller than the amount in Ti-15Mo. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：580 / 583
页数：4
相关论文
共 50 条
  • [31] Powder interlayer bonding of titanium alloys: Ti-6Al-2Sn-4Zr-6Mo and Ti-6Al-4V
    Davies, P.
    Johal, A.
    Davies, H.
    Marchisio, S.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 103 (1-4): : 441 - 452
  • [32] Corrosion Response of Ti6Al4V and Ti15Mo Dental Implant Alloys in the Presence of Listerine Oral Rinse
    Bhola, Rahul
    Chandra, Charu
    Alabbas, Faisal M.
    Kundu, Sukumar
    Mishra, Brajendra
    Olson, David L.
    INTERNATIONAL JOURNAL OF CORROSION, 2013, 2013
  • [33] Effects of α phase precipitation on crevice corrosion and tensile strength in Ti-15Mo alloy
    Min, X. H.
    Emura, S.
    Nishimura, T.
    Zhang, L.
    Tamilselvi, S.
    Tsuchiya, K.
    Tsuzaki, K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (06): : 1480 - 1488
  • [34] Corrosion Behavior of Titanium Alloys (Ti CP2, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-4V and Ti Beta-C) with Anodized and Exposed in NaCl and H2SO4 Solutions
    Gaona-Tiburcio, Citlalli
    Jaquez-Munoz, Jesus Manuel
    Nieves-Mendoza, Demetrio
    Maldonado-Bandala, Erick
    Lara-Banda, Maria
    Lira-Martinez, Manuel Alejandro
    Reyes-Blas, Hortensia
    Baltazar-Zamora, Miguel angel
    Landa-Ruiz, Laura
    Lopez-Leon, Luis Daimir
    Almeraya-Calderon, Facundo
    METALS, 2024, 14 (02)
  • [35] Effect of Ti/Mo and Cr/Mo metallic multilayer films on fretting fatigue resistance of Ti-6Al-4V alloy
    Tang, C. B.
    Liu, D. X.
    Zhang, Q.
    Zhang, X. H.
    MATERIALS RESEARCH INNOVATIONS, 2011, 15 : S166 - S170
  • [36] Comparison of molybdenizing and NiCrAlY coating on Ti and Ti-6Al-4V
    Peng Xiaomin
    Xia Changqing
    Liu Yingying
    Zhang Zhigao
    RARE METALS, 2009, 28 (01) : 49 - 56
  • [37] Comparison of molybdenizing and NiCrAlY coating on Ti and Ti-6Al-4V
    PENG Xiaomin
    RareMetals, 2009, 28 (01) : 49 - 56
  • [38] Comparison of molybdenizing and NiCrAlY coating on Ti and Ti-6Al-4V
    Xiaomin Peng
    Changqing Xia
    Yingying Liu
    Zhigao Zhang
    Rare Metals, 2009, 28 : 49 - 56
  • [39] Corrosion behavior of Ti-6Al-4V in phosphoric acid
    Singh, V.B.
    Hosseini, S.M.A.
    Journal of Applied Electrochemistry, 1994, 24 (03): : 250 - 255
  • [40] Notch Corrosion Fatigue Behavior of Ti-6Al-4V
    Baragetti, Sergio
    MATERIALS, 2014, 7 (06): : 4349 - 4366
12345