Tribocorrosion behavior of Spark Plasma Sintering TiC reinforced Ti-based composites

被引：5

作者：

Farias, I ^{[1
]}

Jimenez, O. ^{[1
]}

Flores, M. ^{[1
]}

Rivera-Tello, Cesar D. ^{[3
]}

Gonzalez, M. A. ^{[1
]}

Olmos, L. ^{[2
]}

机构：

[1] Univ Guadalajara, Dept Ingn Proyectos, Zapopan 45150, Jalisco, Mexico

[2] Univ Michoacana, Inst Invest Ciencias Tierra INICIT, Morelia 58060, Michoacan, Mexico

[3] Univ Guadalajara, Dept Ingn Mecan Elect, CUCEI, Blvd Marcelino Garcia Barragan 1421, Guadalajara 44430, Jalisco, Mexico

来源：

MATERIALS LETTERS | 2020年 / 277卷

关键词：

Spark Plasma Sintering; Tribocorrosion; Ti-based composites; MECHANISMS;

D O I：

10.1016/j.matlet.2020.128298

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A mixture of Ti and TiH2 powders with 0, 3, 10 and 30% Vol. TiC was used to process Ti-based composite materials by Spark Plasma Sintering (SPS) at 850 degrees C. Tribocorrosion tests in Simulated Body Fluid (SBF) were performed by coupling a potentiostat to a microtribometer in a ball-on-plate reciprocating configuration at 2 N load. The results showed that the addition of 3% Vol. TiC resulted in an improvement in wear resistance and corrosion tendency by approximately 3 times in comparison to unreinforced composites. Wear mechanisms showed a transition from severe adhesion, to a less severe damage within abrasion regime with TiC content. (C) 2020 Elsevier B.V. All rights reserved.

引用

页数：4

共 50 条

[31] Rapid preparation of TiC reinforced Ti6Al4V based composites by carburizing method through spark plasma sintering technique
Hao Yanjun
Liu Jinxu
Li Jianchong
Li Shukui
Zou Qinghe
Chen Xingwang
MATERIALS & DESIGN, 2015, 65 : 94 - 97
[32] Viscous flow during spark plasma sintering of Ti-based metallic glassy powders
Chen, Q.
Tang, C. Y.
Chan, K. C.
Liu, L.
JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 557 : 98 - 101
[33] Rapidly sintering TiC/SiC composites by spark plasma sintering (SPS) technique
Wang, LJ
Jiang, W
Bai, SQ
Chen, LD
RARE METAL MATERIALS AND ENGINEERING, 2003, 32 : 214 - 216
[34] Ti Particles Dispersed Ti-Based Metallic Glass Matrix Composite Prepared by Spark Plasma Sintering
Zhu, Shengli
Xie, Guoqiang
Qin, Fengxiang
Wang, Xinmin
Hanawa, Takao
MATERIALS TRANSACTIONS, 2013, 54 (08) : 1335 - 1338
[35] High-temperature oxidation behavior of TiC and TiC plus TiB reinforced TB8 matrix composites prepared by spark plasma sintering
Cao, Bin
Xu, Xiaojing
Li, Chong
Zhang, Rikai
Liu, Qingjun
Zhang, Xu
Chen, Hao
Bai, Xiang
Hu, Chaoxing
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2021, 127 (05):
[36] Spark plasma sintering of graphene reinforced hydroxyapatite composites
Klebert, Szilvia
Balazsi, Csaba
Balazsi, Katalin
Bodis, Eszter
Fazekas, Peter
Keszler, Anna Maria
Szepvoelgyi, Janos
Karoly, Zoltan
CERAMICS INTERNATIONAL, 2015, 41 (03) : 3647 - 3652
[37] Fabrication of in situ TiB2-TiC reinforced steel matrix composites by spark plasma sintering
Li, B. H.
Liu, Y.
Li, J.
Cao, H.
He, L.
POWDER METALLURGY, 2011, 54 (03) : 222 - 224
[38] Mechanical properties of TiC reinforced MgO-ZrO2 composites via spark plasma sintering
Lee, Junho
Jang, Kyu-bong
Lee, Seokhyun
Bin Mo, Chan
Kim, Hyo-kyu
Park, Kyoung Ryeol
Kim, Jongsik
Bang, Junghwan
Jung, In Chul
Kim, Jong Cheol
Mhin, Sungwook
CERAMICS INTERNATIONAL, 2023, 49 (11) : 17255 - 17260
[39] Spark plasma sintering of Ti-diamond composites
Mallik, Awadesh Kumar
Das, Mitun
Ghosh, Sumana
Chakravarty, Dibyendu
CERAMICS INTERNATIONAL, 2019, 45 (09) : 11281 - 11286
[40] Microstructure and mechanical properties of in situ TiC/Ti composites with a laminated structure synthesized by spark plasma sintering
Lei, Chengxin
Du, Yan
Zhu, Ming
Huo, Wangtu
Wu, Hao
Zhang, Yusheng
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 812 (812):

← 1 2 3 4 5 →