Tribocorrosion behavior of Spark Plasma Sintering TiC reinforced Ti-based composites

被引：5
|
作者：
Farias, I [1 ]
Jimenez, O. [1 ]
Flores, M. [1 ]
Rivera-Tello, Cesar D. [3 ]
Gonzalez, M. A. [1 ]
Olmos, L. [2 ]
机构：
[1] Univ Guadalajara, Dept Ingn Proyectos, Zapopan 45150, Jalisco, Mexico
[2] Univ Michoacana, Inst Invest Ciencias Tierra INICIT, Morelia 58060, Michoacan, Mexico
[3] Univ Guadalajara, Dept Ingn Mecan Elect, CUCEI, Blvd Marcelino Garcia Barragan 1421, Guadalajara 44430, Jalisco, Mexico
来源：
MATERIALS LETTERS | 2020年 / 277卷
关键词：
Spark Plasma Sintering; Tribocorrosion; Ti-based composites; MECHANISMS;
D O I：
10.1016/j.matlet.2020.128298
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A mixture of Ti and TiH2 powders with 0, 3, 10 and 30% Vol. TiC was used to process Ti-based composite materials by Spark Plasma Sintering (SPS) at 850 degrees C. Tribocorrosion tests in Simulated Body Fluid (SBF) were performed by coupling a potentiostat to a microtribometer in a ball-on-plate reciprocating configuration at 2 N load. The results showed that the addition of 3% Vol. TiC resulted in an improvement in wear resistance and corrosion tendency by approximately 3 times in comparison to unreinforced composites. Wear mechanisms showed a transition from severe adhesion, to a less severe damage within abrasion regime with TiC content. (C) 2020 Elsevier B.V. All rights reserved.
引用
收藏
页数：4
相关论文
共 50 条
  • [21] In-situ synthesis TiC+TiB/Ti composites by spark plasma sintering
    Wang Pengbol
    Yang Guanjun
    Mao Xiaonan
    RARE METAL MATERIALS AND ENGINEERING, 2007, 36 (03) : 484 - 488
  • [22] Spark Plasma Sintering and tribological behavior of Ti3SiC2-Ti5Si3-TiC composites
    Benamor, A.
    Hadji, Y.
    Chiker, N.
    Haddad, A.
    Guedouar, B.
    Labaiz, M.
    Hakem, M.
    Tricoteaux, A.
    Nivot, C.
    Erauw, J. P.
    Badji, R.
    Hadji, M.
    CERAMICS INTERNATIONAL, 2019, 45 (17) : 21781 - 21792
  • [23] Spark plasma sintering of TiC-ZrC composites
    Li, Ying
    Katsui, Hirokazu
    Goto, Takashi
    CERAMICS INTERNATIONAL, 2015, 41 (05) : 7103 - 7108
  • [24] Synthesis of Ti-based glassy alloy/hydroxyapatite composite by spark plasma sintering
    Zhu, Shengli
    Wang, Xinmin
    Yoshimura, Masahiro
    Inoue, Akihisa
    MATERIALS TRANSACTIONS, 2008, 49 (03) : 502 - 505
  • [25] Using metallic additives as a bonding layer to produce Ti-based laminated composites via spark plasma sintering
    Ghasali, Ehsan
    Ghahremani, Davoud
    Orooji, Yasin
    JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES, 2021, 6 (03): : 435 - 445
  • [26] Ultrafine-grained Ti-based composites with high strength and low modulus fabricated by spark plasma sintering
    Li, Y. Y.
    Zou, L. M.
    Yang, C.
    Li, Y. H.
    Li, L. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 560 : 857 - 861
  • [27] Preparation of Ti-based laminated composites through spark plasma sintering with different carbon sources as the bonding layer
    Ghasali, Ehsan
    Nezhad, Mandi Soltan Ali
    Ghazvinian, Sadegh
    CERAMICS INTERNATIONAL, 2019, 45 (11) : 14045 - 14057
  • [28] High-temperature oxidation behavior of TiC and TiC + TiB reinforced TB8 matrix composites prepared by spark plasma sintering
    Bin Cao
    Xiaojing Xu
    Chong Li
    Rikai Zhang
    Qingjun Liu
    Xu Zhang
    Hao Chen
    Xiang Bai
    Chaoxing Hu
    Applied Physics A, 2021, 127
  • [29] Synthesis and Characterization of Ti/(TiB + TiC) Hybrid in-situ Composites by Spark Plasma Sintering
    V. S. Balaji
    S. Kumaran
    Transactions of the Indian Institute of Metals, 2013, 66 : 339 - 341
  • [30] Synthesis of TiC - Ti Composites via Mechanical Alloying / Spark Plasma Sintering Using Ti and C Powders
    Tsukane, Ryo
    Matsugi, Kazuhiro
    Choi, Yong-Bum
    Tamai, Hiroyasu
    MATERIALS TRANSACTIONS, 2024, 65 (07) : 736 - 743
12345