Effects of semi-solid thermomechanical processing on microstructure and mechanical properties of Al 2024

被引：3
|
作者：
Negini, Hamzeh [1 ,3 ]
Rezaei, Amin [1 ]
Hajisafari, Mahmoud [2 ]
Momeni, Hossein [1 ]
机构：
[1] Malek Ashtar Univ Technol, Metall Mat Ctr, POB 15875-1774, Tehran, Iran
[2] Islamic Azad Univ, Dept Met & Mat Engn, Yazd Branch, Yazd, Iran
[3] Malek Ashtar Univ Technol, Babaei Highway,Shabanloo St, Tehran, Iran
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2019年 / 72卷 / 05期
关键词：
Semi-solid; Thermomechanical; 2024; alloy; Partial remelting; ALUMINUM-ALLOYS; MG ALLOY; PRECIPITATION; EVOLUTION; POWDER;
D O I：
10.1007/s12666-019-01608-0
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A thermomechanical processing (TMP) method consisting of annealing, cold working, and partial remelting was employed to modify the microstructure and mechanical properties of Al 2024 alloy. The effects of the semi-solid temperature and holding time at the semi-solid temperature on the microstructure of the alloy were studied. The results showed that the optimum parameters were 610 degrees C and 7 min. Also, T6 heat treatment was applied to the thermomechanical processed alloy with the best combination of the parameters to examine its effect on the characteristics of the alloy. The results revealed that the amounts of yield strength and ultimate tensile strength increased, but T6 heat treatment did not have any remarkable effect on the tensile properties of the thermomechanical processed sample but improved the hardness of the alloy. In addition, the fracture mode in the thermomechanical processed sample was ductile while in the sample that underwent T6, brittle fracture was dominant.
引用
收藏
页码：1201 / 1209
页数：9
相关论文
共 50 条
  • [41] Effects of mechanical alloying on an Al6061-CNT composite fabricated by semi-solid powder processing
    Wu, Yufeng
    Kim, Gap-Yong
    Russell, Alan M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 538 : 164 - 172
  • [42] Effects of solid solution treatment on microstructure and mechanical properties of SiCp/2024 Al composite: A comparison with 2024 Al alloy
    Liu, G. F.
    Chen, T. J.
    Wang, Z. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 817
  • [43] Microstructure and properties of semi-solid formed Al-Si-Fe alloy
    Zhao, Shu-Guo
    Yuan, Xiao-Guang
    Li, Sheng
    Yu, Hai-Peng
    Cailiao Gongcheng/Journal of Materials Engineering, 2007, (02): : 34 - 38
  • [44] Mechanical properties and their microstructure evaluation in the thixoforming process of semi-solid aluminum alloys
    Cho, WG
    Kang, CG
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 105 (03) : 269 - 277
  • [45] Thermomechanical processing of AA6061 billets for semi-solid forming
    Materials Institute, Marmara Research Center, TUBITAK Gebze, Kocaeli
    41470, Turkey
    Z Metallkd, 2007, 1 (53-59): : 53 - 59
  • [46] Microstructure and Mechanical Properties of Hypereutectic Al-Si alloy with 2% Fe Prepared by Semi-solid Process
    Wu, Shusen
    Lin, Chong
    Lu, Shulin
    An, Ping
    SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES XII, 2013, 192-193 : 130 - 135
  • [47] Effect of Erbium on the Microstructure and Mechanical Properties of Semi-Solid Al-7Si-0.4Mg Alloy
    Qi, Peng
    Li, Bolong
    Wang, Tongbo
    Zhou, Lian
    Nie, Zuoren
    ADVANCED ENGINEERING MATERIALS, 2019, 21 (03)
  • [48] Thermomechanical processing of AA6061 billets for semi-solid forming
    Birol, Yucel
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2007, 98 (01) : 53 - 59
  • [49] Relationship Between the Processing Parameters and the Properties of Semi-solid Processed Al Alloys
    SangYullee
    BomSokKin
    SangYonglee
    HanJunglee
    特种铸造及有色合金, 2001, (S1) : 153 - 156
  • [50] Semi-solid processing of Al-wrought alloys
    Gullo, GC
    Wolf, A
    Steinhoff, K
    Uggowitzer, PJ
    SECOND INTERNATIONAL CONFERENCE ON PROCESSING MATERIALS FOR PROPERTIES, 2000, : 95 - 100
12345