Effects of semi-solid thermomechanical processing on microstructure and mechanical properties of Al 2024

被引：3
|
作者：
Negini, Hamzeh [1 ,3 ]
Rezaei, Amin [1 ]
Hajisafari, Mahmoud [2 ]
Momeni, Hossein [1 ]
机构：
[1] Malek Ashtar Univ Technol, Metall Mat Ctr, POB 15875-1774, Tehran, Iran
[2] Islamic Azad Univ, Dept Met & Mat Engn, Yazd Branch, Yazd, Iran
[3] Malek Ashtar Univ Technol, Babaei Highway,Shabanloo St, Tehran, Iran
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2019年 / 72卷 / 05期
关键词：
Semi-solid; Thermomechanical; 2024; alloy; Partial remelting; ALUMINUM-ALLOYS; MG ALLOY; PRECIPITATION; EVOLUTION; POWDER;
D O I：
10.1007/s12666-019-01608-0
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A thermomechanical processing (TMP) method consisting of annealing, cold working, and partial remelting was employed to modify the microstructure and mechanical properties of Al 2024 alloy. The effects of the semi-solid temperature and holding time at the semi-solid temperature on the microstructure of the alloy were studied. The results showed that the optimum parameters were 610 degrees C and 7 min. Also, T6 heat treatment was applied to the thermomechanical processed alloy with the best combination of the parameters to examine its effect on the characteristics of the alloy. The results revealed that the amounts of yield strength and ultimate tensile strength increased, but T6 heat treatment did not have any remarkable effect on the tensile properties of the thermomechanical processed sample but improved the hardness of the alloy. In addition, the fracture mode in the thermomechanical processed sample was ductile while in the sample that underwent T6, brittle fracture was dominant.
引用
收藏
页码：1201 / 1209
页数：9
相关论文
共 50 条
  • [31] Microstructure-dependent mechanical properties of semi-solid copper alloys
    Cao, Miao
    Wang, Zhao
    Zhang, Qi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 715 : 413 - 420
  • [32] Advancements in semi-solid metal processing of ADC12 aluminium alloy: Microstructure and mechanical properties
    Gautam, Sujeet Kumar
    Singh, Bipin Kumar
    Singh, Ritesh Kumar
    Tiwari, Sanjiv Kumar
    Upadhyaya, Rajat
    Khandelwal, Himanshu
    Kumar, Gaurav
    Hasnain, S. M. Mozammil
    Zairov, Rustem
    RESULTS IN ENGINEERING, 2025, 25
  • [33] Microstructure and mechanical properties of extruded Al-Si alloy (A356) in the semi-solid state
    Bayoumi, M. A.
    Negm, M. I.
    El-Gohry, A. M.
    MATERIALS & DESIGN, 2009, 30 (10) : 4469 - 4477
  • [34] Effect of semi-solid forming on the microstructure and mechanical properties of the iron containing Al-Si alloys
    Shabestari, S. G.
    Parshizfard, E.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (30) : 7973 - 7978
  • [35] Gas induced semi-solid process effects on microstructure and mechanical properties of 319 aluminum alloy
    Baygan, Milad
    Gholamipour, Reza
    Shahri, Farzad
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2015, 106 (09) : 1005 - 1009
  • [36] Semi-solid processing of Al and Mg alloys
    Shehata, MT
    Zoqui, EJ
    Kao, V
    Essadiqi, E
    Materials in the Automotive Industry, 2001, : 207 - 223
  • [37] Modification of microstructure and mechanical properties of Al-Zn-Mg/3 wt.% Al2O3 composite through semi-solid thermomechanical processing using variable loads
    Hajizamani, Mohsen
    Alizadeh, Mostafa
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2017, 108 (10) : 840 - 847
  • [38] Effects of Mg content on microstructure and mechanical properties of SiCp/Al-Mg composites fabricated by semi-solid stirring technique
    耿林
    张宏伟
    李昊择
    关丽娜
    黄陆军
    TransactionsofNonferrousMetalsSocietyofChina, 2010, 20 (10) : 1851 - 1855
  • [39] Effects of Mg content on microstructure and mechanical properties of SiCp/Al-Mg composites fabricated by semi-solid stirring technique
    Geng Lin
    Zhang Hong-wei
    Li Hao-ze
    Guan Li-na
    Huang Lu-jin
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 (10) : 1851 - 1855
  • [40] Microstructure investigations and mechanical properties of an Al-Al2O3 MMC produced by semi-solid solidification
    Carrasco, C.
    Camurri, C.
    Garcia, J.
    Montalba, C.
    Prat, O.
    Rojas, D.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2011, 42 (06) : 542 - 548
12345