Effects of semi-solid thermomechanical processing on microstructure and mechanical properties of Al 2024

被引：3

作者：

Negini, Hamzeh ^{[1
,3
]}

Rezaei, Amin ^{[1
]}

Hajisafari, Mahmoud ^{[2
]}

Momeni, Hossein ^{[1
]}

机构：

[1] Malek Ashtar Univ Technol, Metall Mat Ctr, POB 15875-1774, Tehran, Iran

[2] Islamic Azad Univ, Dept Met & Mat Engn, Yazd Branch, Yazd, Iran

[3] Malek Ashtar Univ Technol, Babaei Highway,Shabanloo St, Tehran, Iran

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2019年 / 72卷 / 05期

关键词：

Semi-solid; Thermomechanical; 2024; alloy; Partial remelting; ALUMINUM-ALLOYS; MG ALLOY; PRECIPITATION; EVOLUTION; POWDER;

D O I：

10.1007/s12666-019-01608-0

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

A thermomechanical processing (TMP) method consisting of annealing, cold working, and partial remelting was employed to modify the microstructure and mechanical properties of Al 2024 alloy. The effects of the semi-solid temperature and holding time at the semi-solid temperature on the microstructure of the alloy were studied. The results showed that the optimum parameters were 610 degrees C and 7 min. Also, T6 heat treatment was applied to the thermomechanical processed alloy with the best combination of the parameters to examine its effect on the characteristics of the alloy. The results revealed that the amounts of yield strength and ultimate tensile strength increased, but T6 heat treatment did not have any remarkable effect on the tensile properties of the thermomechanical processed sample but improved the hardness of the alloy. In addition, the fracture mode in the thermomechanical processed sample was ductile while in the sample that underwent T6, brittle fracture was dominant.

引用

页码：1201 / 1209

页数：9

共 50 条

[21] Microstructure and mechanical properties of cast and semi-solid formed Mg-Al-Zn alloys
Kim, Jeong-Min
Park, Bong-Koo
Jun, Joong-Hwan
Kim, Ki-Tae
Jung, Woon-Jae
SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES, 2006, 116-117 (288-291): : 288 - 291
[22] Mechanical properties and microstructure of semi-solid injection molded Mg-Al-Ca alloys
Sakamoto, Kazuo
Yamamoto, Kenichi
Keikinzoku/Journal of Japan Institute of Light Metals, 2002, 52 (10): : 437 - 441
[23] Improvement of mechanical properties of semi-solid alloys by ECAP processing
Nomura, Fumiya
Matsuba, Takuya
Tanaka, Tatsuya
Imaida, Yutaka
MULTI-FUNCTIONAL MATERIALS AND STRUCTURES III, PTS 1 AND 2, 2010, 123-125 : 483 - 486
[24] On the formation of spheroidal microstructures in a semi-solid Al-Si alloy by thermomechanical processing
Vieira, E. A.
Kliauga, A. M.
Ferrante, M.
SCRIPTA MATERIALIA, 2007, 57 (12) : 1165 - 1168
[25] Microstructure, properties and defect of SiCp/2024 composites fabricated by semi-solid extrusion
Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2000, 32 (05): : 69 - 72
[26] Microstructure, fluidity, and mechanical properties of semi-solid processed ductile iron
M. Ramadan
N. El-Bagoury
N. Fathy
M. A. Waly
A. A. Nofal
Journal of Materials Science, 2011, 46 : 4013 - 4019
[27] Microstructure and Mechanical Properties of Semi-Solid Squeeze Casting Copper Alloy
Li Naiyong
Xiao Han
Xiong Chi
Lu Dehong
Zhou Rongfeng
Jiang Yehua
RARE METAL MATERIALS AND ENGINEERING, 2018, 47 (09) : 2813 - 2820
[28] IMPACT OF SECTION THICKNESS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SEMI-SOLID CASTINGS
Midson, Stephen
He, Youfeng
Hu, Xiaogang
Li, Daquan
Zhang, Fan
Zhu, Qiang
SHAPE CASTING, 2014, : 177 - 184
[29] Influence of processing on microstructure and semi-solid behavior of Al-Ge alloys
Valer, J
Saint-Antonin, F
Meneses, P
Suery, M
5TH INTERNATIONAL CONFERENCE ON SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES, PROCEEDINGS, 1998, : 3 - 10
[30] Microstructure, fluidity, and mechanical properties of semi-solid processed ductile iron
Ramadan, M.
El-Bagoury, N.
Fathy, N.
Waly, M. A.
Nofal, A. A.
JOURNAL OF MATERIALS SCIENCE, 2011, 46 (11) : 4013 - 4019

← 1 2 3 4 5 →