Effects of semi-solid thermomechanical processing on microstructure and mechanical properties of Al 2024

被引：3
|
作者：
Negini, Hamzeh [1 ,3 ]
Rezaei, Amin [1 ]
Hajisafari, Mahmoud [2 ]
Momeni, Hossein [1 ]
机构：
[1] Malek Ashtar Univ Technol, Metall Mat Ctr, POB 15875-1774, Tehran, Iran
[2] Islamic Azad Univ, Dept Met & Mat Engn, Yazd Branch, Yazd, Iran
[3] Malek Ashtar Univ Technol, Babaei Highway,Shabanloo St, Tehran, Iran
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2019年 / 72卷 / 05期
关键词：
Semi-solid; Thermomechanical; 2024; alloy; Partial remelting; ALUMINUM-ALLOYS; MG ALLOY; PRECIPITATION; EVOLUTION; POWDER;
D O I：
10.1007/s12666-019-01608-0
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A thermomechanical processing (TMP) method consisting of annealing, cold working, and partial remelting was employed to modify the microstructure and mechanical properties of Al 2024 alloy. The effects of the semi-solid temperature and holding time at the semi-solid temperature on the microstructure of the alloy were studied. The results showed that the optimum parameters were 610 degrees C and 7 min. Also, T6 heat treatment was applied to the thermomechanical processed alloy with the best combination of the parameters to examine its effect on the characteristics of the alloy. The results revealed that the amounts of yield strength and ultimate tensile strength increased, but T6 heat treatment did not have any remarkable effect on the tensile properties of the thermomechanical processed sample but improved the hardness of the alloy. In addition, the fracture mode in the thermomechanical processed sample was ductile while in the sample that underwent T6, brittle fracture was dominant.
引用
收藏
页码：1201 / 1209
页数：9
相关论文
共 50 条
  • [1] Effects of semi-solid thermomechanical processing on microstructure and mechanical properties of Al 2024
    Hamzeh Negini
    Amin Rezaei
    Mahmoud Hajisafari
    Hossein Momeni
    Transactions of the Indian Institute of Metals, 2019, 72 : 1201 - 1209
  • [2] Microstructure and mechanical properties of Al alloys by semi-solid processing with LSPSF technology
    Guo, H. M.
    Yang, X. J.
    Wang, J. X.
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL II: MODERN DESIGN THEORY AND METHODOLOGY, MEMS AND NANOTECHNOLOGY, AND MATERIAL SCIENCE AND TECHNOLOGY IN MANUFACTURING, 2009, 628-629 : 477 - +
  • [3] Effect of Sr Addition on Microstructure and Mechanical Properties of Semi-solid 2024 Al Alloys
    Khunbanterng, Nisachon
    Wisutmethangoon, Sirikul
    Plookphol, Thawatchai
    Wannasin, Jessada
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE IV, PTS 1-5, 2014, 496-500 : 336 - +
  • [4] Effect of semi-solid processing on microstructure and mechanical properties of 5052 aluminum alloy
    Lue Shu-lin
    Wu Shu-sen
    Zhu Ze-ming
    An Ping
    Mao You-wu
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 : S758 - S762
  • [5] Effect of semi-solid processing on microstructure and mechanical properties of 5052 aluminum alloy
    吕书林
    吴树森
    朱泽明
    安萍
    毛有武
    Transactions of Nonferrous Metals Society of China, 2010, 20(S3) (S3) : 758 - 762
  • [6] Effects of predeformation and semi-solid processing on microstructure and mechanical properties of Cr-V-Mo steel
    Meng, Yi
    Sugiyama, Sumio
    Soltanpour, Mehdi
    Yanagimoto, Jun
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2013, 213 (03) : 426 - 433
  • [7] Microstructure of tool steel upon combined semi-solid processing and thermomechanical treatment
    Aišman, D. (daisman@vctt.zcu.cz), 1600, Elsevier Ltd (586):
  • [8] Microstructure of tool steel upon combined semi-solid processing and thermomechanical treatment
    Masek, B.
    Aisman, D.
    Jirkova, H.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 586 : S165 - S167
  • [9] Aging Time on the Microstructure and Mechanical Properties of A356 Alloy by Semi-solid Processing
    Qi, Peng
    Li, Bolong
    Lv, Wenjian
    Dong, Shasha
    Wang, Tongbo
    Li, Ning
    Nie, Zuoren
    HIGH PERFORMANCE STRUCTURAL MATERIALS, 2018, : 109 - 116
  • [10] Effect of semi-solid processing on solidification microstructure and mechanical properties of gray cast iron
    Ramadan, M
    Takita, M
    Nomura, H
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 417 (1-2): : 166 - 173
12345