Comparative study of surface roughness in milling AISI D2 steel using PVD coated and uncoated tungsten carbide insert

被引：0

作者：

Redzuwan, B. I. ^{[1
]}

Aziz, M. S. A. ^{[1
,2
]}

Ayub, M. F. ^{[1
]}

Kasim, M. S. ^{[1
,2
]}

Izamshah, R. ^{[1
,2
]}

Amran, M. ^{[1
,2
]}

机构：

[1] Univ Tekn Malaysia Melaka, Fac Mfg Engn, Durian Tunggal 76100, Melaka, Malaysia

[2] Univ Tekn Malaysia Melaka, AMC, PMG, Durian Tunggal 76100, Melaka, Malaysia

来源：

PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2015 | 2015年

关键词：

Surface Roughness; AISI D2 steel; TiAlN/AlCrN PVD coated tungsten carbide insert;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper comparatively investigates the effect of cutting speed and feed rate on the surface roughness of AISI D2 steel using uncoated and PVD coated inserts in milling operation under dry condition. The response surface methodology (RSM) with a Central Composite Design (CCD) was employed in the experiment to determine the optimum control variables which are cutting speed and feed rate. The optimum condition required for obtaining the minimum surface roughness when milling AISI D2 steel was cutting speed of 100.38 m/min, feed rate of 0.1 mm/tooth, axial depth of cut of 1.5 mm and radial depth of cut of 2.5 mm using PVD coated insert which resulted in a surface roughness of 0.129 mu m.

引用

页码：137 / 138

页数：2

共 50 条

[21] COMPARATIVE PERFORMANCE OF COATED AND UNCOATED INSERTS DURING INTERMITTENT CUT MILLING OF AISI 4340 STEEL
Saravanan, L.
Xavior, M. A.
JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2015, 10 (05): : 606 - 616
[22] Optimization of Machining Parameters to Minimize Surface Roughness During End Milling of AISI D2 Tool Steel Using Genetic Algorithm
Patel, Ravikumar D.
Bhavsar, Sanket N.
ADVANCES IN MATERIALS AND MANUFACTURING ENGINEERING, ICAMME 2019, 2020, : 231 - 238
[23] EFFECT OF CUTTING PARAMETERS ON SURFACE ROUGHNESS WHEN MILLING HARDENED AISI D2 STEEL (56 HRC) USING TAGUCHI TECHNIQUES
Shammari, Ahmed Zaidan Mohammed
Amwead, Kamal Ati
Hadi, Auday Shaker
INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 3, PTS A-C: DESIGN, MATERIALS, AND MANUFACTURING, 2013, : 1467 - 1472
[24] Experimental investigation during end milling of AISI D2 tool steel using AlCrN coated tool
Patel, Ravikumar D.
Bhavsar, Sanket N.
MATERIALS TODAY-PROCEEDINGS, 2020, 22 : 2647 - 2656
[25] Experimental investigation on surface integrity during machining of AISI 420 steel with tungsten carbide insert
Palanisamy, D.
Devaraju, A.
Arulkirubakaran, D.
Manikandan, N.
MATERIALS TODAY-PROCEEDINGS, 2020, 22 : 992 - 997
[26] A study in turning of AISI D2 steel with textured and non -textured coated carbide tool at the flank face
Sarma, Deba Kumar
Rajbongshi, Sanjib Kr
MATERIALS TODAY-PROCEEDINGS, 2020, 28 : 574 - 581
[27] Investigation of Tool Wear, Tool Life and Surface Roughness When Machining AISI 02 Hardened Steel Using PVD TiAlN Coated Carbide Tools
Rafai, N. H.
Lajis, M. A.
Hosni, N. A. J.
4TH MECHANICAL AND MANUFACTURING ENGINEERING, PTS 1 AND 2, 2014, 465-466 : 1098 - 1102
[28] Modeling and analysis of surface roughness on machining of Nimonic C-263 alloy by PVD coated carbide insert
Ezilarasan, C.
Kumar, V. S. Senthil
Velayudham, A.
Palanikumar, K.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (09) : 1986 - 1994
[29] Modelling and statistical analysis of surface roughness by Taguchi and RSM techniques in hard turning of AISI 52100 steel with multilayer coated carbide insert
Pradeep A.V.
Lingaraju D.
Ramakrishna S.
International Journal of Machining and Machinability of Materials, 2019, 21 (04) : 300 - 320
[30] Friction drilling of austenitic stainless steel by uncoated and PVD AlCrN- and TiAlN-coated tungsten carbide tools
Lee, Shin Min
Chow, Han Ming
Huang, Fuang Yuan
Yan, Biing Hwa
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2009, 49 (01): : 81 - 88

← 1 2 3 4 5 →