Comparative study of surface roughness in milling AISI D2 steel using PVD coated and uncoated tungsten carbide insert

被引：0

作者：

Redzuwan, B. I. ^{[1
]}

Aziz, M. S. A. ^{[1
,2
]}

Ayub, M. F. ^{[1
]}

Kasim, M. S. ^{[1
,2
]}

Izamshah, R. ^{[1
,2
]}

Amran, M. ^{[1
,2
]}

机构：

[1] Univ Tekn Malaysia Melaka, Fac Mfg Engn, Durian Tunggal 76100, Melaka, Malaysia

[2] Univ Tekn Malaysia Melaka, AMC, PMG, Durian Tunggal 76100, Melaka, Malaysia

来源：

PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2015 | 2015年

关键词：

Surface Roughness; AISI D2 steel; TiAlN/AlCrN PVD coated tungsten carbide insert;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper comparatively investigates the effect of cutting speed and feed rate on the surface roughness of AISI D2 steel using uncoated and PVD coated inserts in milling operation under dry condition. The response surface methodology (RSM) with a Central Composite Design (CCD) was employed in the experiment to determine the optimum control variables which are cutting speed and feed rate. The optimum condition required for obtaining the minimum surface roughness when milling AISI D2 steel was cutting speed of 100.38 m/min, feed rate of 0.1 mm/tooth, axial depth of cut of 1.5 mm and radial depth of cut of 2.5 mm using PVD coated insert which resulted in a surface roughness of 0.129 mu m.

引用

页码：137 / 138

页数：2

共 50 条

[31] Machinability Evaluation in Hard Milling of AISI D2 Steel
Gaitonde, Vinayak Neelakanth
Karnik, Sulse Ramesh
Alves Maciel, Caio Henrique
Campos Rubio, Juan Carlos
Abrao, Alexandre Mendes
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2016, 19 (02): : 360 - 369
[32] On the refinement of carbide precipitates by cryotreatment in AISI D2 steel
Das, D.
Dutta, A. K.
Ray, K. K.
PHILOSOPHICAL MAGAZINE, 2009, 89 (01) : 55 - 76
[33] MQL assisted cleaner machining using PVD TiAlN coated carbide insert: Comparative assessment
Das, Rabin Kumar
Sahoo, Ashok Kumar
Kumar, Ramanuj
Roy, Sudesna
Mishra, Puma Chandra
Mohanty, Tanmaya
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2019, 26 (5-6) : 311 - 325
[34] Experimental investigation on hard turning of AISI 4340 steel using cemented coated carbide insert
Kumar, J. Pradeep
Kishore, K. P.
Kumar, M. Ranjith
Karthick, K. R. Saran
Gowtham, S. Vishnu
INTERNATIONAL CONFERENCE ON ADVANCES IN METALLURGY, MATERIALS AND MANUFACTURING, 2018, 314
[35] Preparing TiC coating on AISI D2 steel using mechanical milling technique
Saba, Farhad
Raygan, Shahram
Abdizadeh, Hossein
Dolatmoradi, Ata
POWDER TECHNOLOGY, 2013, 246 : 229 - 234
[36] Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts
Kivak, Turgay
MEASUREMENT, 2014, 50 : 19 - 28
[37] Surface integrity investigation and VIKOR optimisation during the milling of aluminium-lithium alloy using uncoated and PVD-coated carbide tools
Marakini, Vikas
Pai, Srinivasa P. P.
Bhat, Udaya K. K.
Thakur, DineshSingh
Achar, Bhaskara
CANADIAN METALLURGICAL QUARTERLY, 2024, 63 (03) : 767 - 778
[38] Modelling and analysis of tool wear and surface roughness in hard turning of AISI D2 steel using response surface methodology
Mir, M. Junaid
Wani, M. F.
INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING COMPUTATIONS, 2018, 9 (01) : 63 - 74
[39] Surface Roughness Optimization Using Taguchi Method of High Speed End Milling For Hardened Steel D2
Al-Hazza, Muataz Hazza Faizi
Ibrahim, Nur Asmawiyah Bt
Adesta, Erry T. Y.
Khan, Ahsan Ali
Sidek, Atiah Bt. Abdullah
3RD INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND AEROSPACE ENGINEERING 2016, 2017, 184
[40] Micro-Milling of Hardened AISI D2 Tool Steel
Saedon, J. B.
Soo, S. L.
Aspinwall, D. K.
Barnacle, A.
MATERIALS AND MANUFACTURING TECHNOLOGIES XIV, 2012, 445 : 62 - +

← 1 2 3 4 5 →