ANALYSIS OF HIGH TEMPERATURE CREEP ON THE NUT CONNECTION COMPONENTS OF A 600MW SUPERCRITICAL STEAM TURBINE

被引：0
|
作者：
Jiang, P. N. [1 ]
Wang, W. Z. [1 ]
Jiao, G. C. [1 ]
机构：
[1] Shanghai Jiao Tong Univ, Key Lab, Educ Minist Power Machinery & Engn, Shanghai 200240, Peoples R China
来源：
PROCEEDINGS OF THE ASME TURBO EXPO 2012, VOL 5 | 2012年
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A model of the nut connection components of a 600MW supercritical steam turbine was established by finite element analysis to investigate the influence of creep on the nut connection components. Due to the complex structure and the multi-axial loadings, Cocks-Ashby coefficients were used to depict the multi-axial creep behavior. Multi-axial creep deformation criteria (MCDC) and multi-axial creep rupture criteria (MCRC) were used to assess the structure reliability. In addition, sealing performance of the nut connection components in the creep time of 2 X 10(5) hours was numerically investigated in terms of the contact pressure and the radial contact length. The results demonstrated that the creep strength of the nut connection components after 2 X 10(5) hours could maintain the safety operation of the nut connection components. The contact pressure distribution and the radial contact length in circumferential could prevent the leakage steam flow from the high pressure zone to the low pressure zone.
引用
收藏
页码：145 / 151
页数：7
相关论文
共 50 条
  • [11] Optimization Research on Nozzle Governing 600MW Steam Turbine Operation
    Li, Ling
    Xu, Jian-qun
    Li, Gang
    Zhou, Ke-yi
    Shi, Yong-feng
    [J]. 2011 ASIA-PACIFIC POWER AND ENERGY ENGINEERING CONFERENCE (APPEEC), 2011,
  • [12] Temperature and stress analysis for high pressure cylinder of supercritical 1 000 MW steam turbine
    College of Power Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
    [J]. Shanghai Ligong Daxue Xuebao, 2006, 4 (342-346):
  • [13] Optimization of Steam Governing Arrangement for 600MW Sub-critical Steam Turbine Unit
    Guo, Di
    Hu, Nian-su
    Wang, Jian-mei
    Huang, Mei
    Liu, Yong-hui
    Yi, Zhao-hui
    [J]. 2010 ASIA-PACIFIC POWER AND ENERGY ENGINEERING CONFERENCE (APPEEC), 2010,
  • [14] TORSIONAL VIBRATION ANALYSIS AND STRESS CALCULATION FOR THE FAULT 600MW STEAM TURBINE GENERATOR SHAFT SYSTEM
    Jiang, Dongxiang
    Hong, Liangyou
    Wang, Zheng
    Xie, Xiaorong
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, VOL 1, PTS A AND B, 2010, : 103 - 110
  • [15] Analysis on Shaft Torsion Response of 600MW Steam Turbine Unit Under Quick Load Regulation
    An Hong-wen
    Ma Zhi-yong
    Li Zhuang
    Zhong Cai-mao
    Liu Yang
    [J]. 26TH CHINESE CONTROL AND DECISION CONFERENCE (2014 CCDC), 2014, : 204 - 208
  • [16] Study on Control System of Turbine Speed of 600MW Ultra-Supercritical Unit
    Ding, Daye
    Yu, Shaojuan
    Li, Chen
    [J]. ELECTRICAL POWER & ENERGY SYSTEMS, PTS 1 AND 2, 2012, 516-517 : 660 - 664
  • [17] EFFECTS OF LEAKAGE COOLING ON IP ROTOR DISC AND ROOT IN 600MW STEAM TURBINE
    Yang, Jiandao
    Qi, Mingxu
    Zhou, Daiwei
    Yang, Hong
    [J]. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON POWER ENGINEERING 2009 (ICOPE-09), VOL 2, 2009, : 485 - 490
  • [18] Feedback-Compensated Neural Network Inverse Control for Superheated Steam Temperature of a 600MW Supercritical Boiler Unit
    Ma Liangyu
    Ge Yinping
    Shi Zhenxing
    [J]. 2011 30TH CHINESE CONTROL CONFERENCE (CCC), 2011, : 2731 - 2736
  • [19] Thermal analysis of cooled supercritical steam turbine components
    Kosman, Wojciech
    [J]. ENERGY, 2010, 35 (02) : 1181 - 1187
  • [20] 600MW Steam Turbine Side Optimization Retrofitting Effect Analysis And Calculation Of Energy-saving Quantity
    Yi Ruyang
    Shi Zhangming
    [J]. 2013 CHINESE AUTOMATION CONGRESS (CAC), 2013, : 542 - 545
12345