Influence of custom-made and prefabricated insoles before and after an intense run

被引:19
|
作者
Gabriel Lucas-Cuevas, Angel [1 ]
Camacho-Garcia, Andres [2 ]
Llinares, Raul [2 ]
Priego Quesada, Jose Ignacio [1 ,3 ]
Llana-Belloch, Salvador [1 ]
Perez-Soriano, Pedro [1 ]
机构
[1] Univ Valencia, Dept Phys Educ & Sports, Res Grp Sport Biomech GIBD, Valencia, Spain
[2] Univ Politecn Valencia, Alcoy, Spain
[3] Univ Valencia, Dept Physiol, Biophys & Med Phys Grp, Valencia, Spain
来源
PLOS ONE | 2017年 / 12卷 / 02期
关键词
TIBIAL STRESS-FRACTURE; GROUND REACTION FORCE; SHOCK ATTENUATION; LOWER-EXTREMITY; IMPACT FORCES; PERCEIVED EXERTION; MIDSOLE THICKNESS; OVERUSE INJURIES; PLANTAR PRESSURE; STRIKE PATTERN;
D O I
10.1371/journal.pone.0173179
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
Each time the foot contacts the ground during running there is a rapid deceleration that results in a shock wave that is transmitted from the foot to the head. The fatigue of the musculoskeletal system during running may decrease the ability of the body to absorb those shock waves and increase the risk of injury. Insoles are commonly prescribed to prevent injuries, and both custom-made and prefabricated insoles have been observed to reduce shock accelerations during running. However, no study to date has included a direct comparison of their behaviour measured over the same group of athletes, and therefore great controversy still exists regarding their effectiveness in reducing impact loading during running. The aim of the study was to analyse the acute differences in stride and shock parameters while running on a treadmill with custom-made and prefabricated insoles. Stride parameters (stride length, stride rate) and shock acceleration parameters (head and tibial peak acceleration, shock magnitude, acceleration rate, and shock attenuation) were measured using two triaxial accelerometers in 38 runners at 3.33 m/s before and after a 15-min intense run while using the sock liner of the shoe (control condition), prefabricated insoles and custom-made insoles. No differences in shock accelerations were found between the custom-made and the control insoles. The prefabricated insoles increased the head acceleration rate (post-fatigue, p = 0.029) compared to the control condition. The custom-made reduced tibial (pre-fatigue, p = 0.041) and head acceleration rates (pre-fatigue and post-fatigue, p = 0.01 and p = 0.046) compared to the prefabricated insoles. Neither the stride nor the acceleration parameters were modified as a result of the intense run. In the present study, the acute use of insoles (custom-made, prefabricated) did not reduce shock accelerations compared to the control insoles. Therefore, their effectiveness at protecting against injuries associated with elevated accelerations is not supported and remains unclear.
引用
收藏
页数:14
相关论文
共 50 条
  • [1] Effect of custom-made and prefabricated foot orthoses on kinematic parameters during an intense prolonged run
    Gil-Calvo, Marina
    Jimenez-Perez, Irene
    Ignacio Priego-Quesada, Jose
    Lucas-Cuevas, Angel G.
    Perez-Soriano, Pedro
    PLOS ONE, 2020, 15 (03):
  • [2] Effect of custom-made and prefabricated insoles on plantar loading parameters during running with and without fatigue
    Gabriel Lucas-Cuevas, Angel
    Perez-Soriano, Pedro
    Llana-Belloch, Salvador
    Macian-Romero, Cecili
    Sanchez-Zuriaga, Daniel
    JOURNAL OF SPORTS SCIENCES, 2014, 32 (18) : 1712 - 1721
  • [3] Evaluation of Custom-made Insoles on Pes Cavus during Walking
    Choi, Jung-Kyu
    Yoo, Chan Il
    Kim, Kyung-Ah
    Won, Yonggwan
    Kim, Jung-Ja
    2014 INTERNATIONAL CONFERENCE ON IT CONVERGENCE AND SECURITY (ICITCS), 2014,
  • [4] Biomechanical analysis on custom-made insoles in gait of idiopathic pes cavus
    Jungkyu Choi
    Ji Yong Jung
    Yonggwan Won
    Jung-Ja Kim
    Journal of Foot and Ankle Research, 7 (Suppl 1)
  • [5] A recommended method for management of foot pain using custom-made insoles
    AlFahel, H
    Zamzam, M
    Kremli, M
    AlZahrani, S
    ANNALS OF SAUDI MEDICINE, 1997, 17 (04) : 475 - 477
  • [6] A collaborative web-based platform for the prescription of Custom-Made Insoles
    Mandolini, Marco
    Brunzini, Agnese
    Germani, Michele
    ADVANCED ENGINEERING INFORMATICS, 2017, 33 : 360 - 373
  • [7] Effects of prefabricated and custom-made foot orthoses on skin temperature of the foot soles after running
    Gil-Calvo, M.
    Priego-Quesada, J., I
    Jimenez-Perez, I
    Lucas-Cuevas, A.
    Perez-Soriano, P.
    PHYSIOLOGICAL MEASUREMENT, 2019, 40 (05)
  • [8] Fracture Resistance of Esthetic Prefabricated and Custom-Made Crowns for Primary Molars After Artificial Aging
    Oguz, Ece Irem
    Bezgin, Tugba
    Orhan, Ayse Isil
    Buyuksungur, Arda
    Orhan, Kaan
    PEDIATRIC DENTISTRY, 2022, 44 (05) : 368 - 374
  • [9] Effects of Custom-made Insoles on Plantar Biomechanics and Upper Extremity Muscle Performance
    Xu, Yi
    Hou, Qing-hua
    Han, Xiu-lan
    Wang, Chu-huai
    Huang, Dong-feng
    CURRENT MEDICAL SCIENCE, 2022, 42 (01) : 159 - 168
  • [10] Effects of Custom-made Insoles on Plantar Biomechanics and Upper Extremity Muscle Performance
    Yi Xu
    Qing-hua Hou
    Xiu-lan Han
    Chu-huai Wang
    Dong-feng Huang
    Current Medical Science, 2022, 42 : 159 - 168