The analysis of instantaneous tool displacements during precise ball end milling

被引：0
|
作者：
Wojciechowski, Szymon [1 ]
机构：
[1] Poznan Univ Tech, Inst Mech Technol, Fac Mech Engn & Management, Poznan, Poland
来源：
MODERN TECHNOLOGIES IN MANUFACTURING (MTEM 2017 - AMATUC) | 2017年 / 137卷
关键词：
VIBRATIONS; FORCES; FINISH; WEAR;
D O I：
10.1051/matecconf/201713705008
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper presents the quantitative and qualitative analysis of monolithic ball end mill's instantaneous displacements generated during precise milling of inclined surfaces. The conducted experiment involves the measurements of tool's joining part displacements with the application of laser displacement sensor and cutting forces with piezoelectric dynamometer. The milling tests were carried out for the hardened alloy 55NiCrMoV6 steel in a range of variable feed per tooth and surface inclination angle values. The obtained results can be applied for the selection of effective milling parameters allowing the improvement of machined surface finish.
引用
下载
收藏
页数：7
相关论文
共 50 条
  • [41] Dynamic modeling and nonlinear vibration analysis of spindle system during ball end milling process
    Miao, Huihui
    Wang, Chenyu
    Li, Changyou
    Yao, Guo
    Zhang, Xiulu
    Liu, Zhendong
    Xu, Mengtao
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (11-12): : 7867 - 7889
  • [42] Dynamic modeling and nonlinear vibration analysis of spindle system during ball end milling process
    Huihui Miao
    Chenyu Wang
    Changyou Li
    Guo Yao
    Xiulu Zhang
    Zhendong Liu
    Mengtao Xu
    The International Journal of Advanced Manufacturing Technology, 2022, 121 : 7867 - 7889
  • [43] Chatter stability prediction for five-axis ball end milling with precise integration method
    Dai, Yuebang
    Li, Hongkun
    Wei, Zhaocheng
    Zhang, Haiyun
    JOURNAL OF MANUFACTURING PROCESSES, 2018, 32 : 20 - 31
  • [44] Reliability sensitivity analysis of ball-end milling accuracy
    Changli Wang
    Pengfei Ding
    Xianzhen Huang
    Tianhong Gao
    Changyou Li
    Ce Zhang
    The International Journal of Advanced Manufacturing Technology, 2021, 112 : 2051 - 2064
  • [45] Reliability sensitivity analysis of ball-end milling accuracy
    Wang, Changli
    Ding, Pengfei
    Huang, Xianzhen
    Gao, Tianhong
    Li, Changyou
    Zhang, Ce
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 112 (7-8): : 2051 - 2064
  • [46] Modeling and Simulation of the Dynamics of the Milling of Ball End Milling
    Sun Mengqin
    MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5, 2012, 130-134 : 2364 - 2370
  • [47] Cutting forces and vibrations during ball end milling of inclined surfaces
    Wojciechowski, Szymon
    Twardowski, Pawel
    Pelic, Marcin
    6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014), 2014, 14 : 113 - 118
  • [48] Theoretical model of instantaneous milling force for CFRP milling with a ball-end milling cutter: Considering spatial dimension and temporal dimension discontinuity effects
    Wang, Fuji
    Li, Yue
    Zhang, Boyu
    Deng, Jun
    Lin, Yongquan
    Yang, Lelin
    Fu, Rao
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 75 : 346 - 362
  • [49] Prediction of cutting forces and instantaneous tool deflection in micro end milling by considering tool run-out
    Zhang, Xuewei
    Yu, Tianbiao
    Wang, Wanshan
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, 136 : 124 - 133
  • [50] EFFECTS OF CUTTING PARAMETERS AND TOOL-PATH STRATEGIES ON TOOL ACCELERATION IN BALL-END MILLING
    Gok, Arif
    Gok, Kadir
    Bilgin, Mehmet Burak
    Alkan, Mehmet Ali
    MATERIALI IN TEHNOLOGIJE, 2017, 51 (06): : 957 - 965
12345