The analysis of instantaneous tool displacements during precise ball end milling

被引：0
|
作者：
Wojciechowski, Szymon [1 ]
机构：
[1] Poznan Univ Tech, Inst Mech Technol, Fac Mech Engn & Management, Poznan, Poland
来源：
MODERN TECHNOLOGIES IN MANUFACTURING (MTEM 2017 - AMATUC) | 2017年 / 137卷
关键词：
VIBRATIONS; FORCES; FINISH; WEAR;
D O I：
10.1051/matecconf/201713705008
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper presents the quantitative and qualitative analysis of monolithic ball end mill's instantaneous displacements generated during precise milling of inclined surfaces. The conducted experiment involves the measurements of tool's joining part displacements with the application of laser displacement sensor and cutting forces with piezoelectric dynamometer. The milling tests were carried out for the hardened alloy 55NiCrMoV6 steel in a range of variable feed per tooth and surface inclination angle values. The obtained results can be applied for the selection of effective milling parameters allowing the improvement of machined surface finish.
引用
下载
收藏
页数：7
相关论文
共 50 条
  • [21] Effect of Tool Tilting Angle on Tool Wear and Surface Roughness in Micro Ball End Milling
    Hamaguchi, Kazuya
    Kagata, Yuji
    Shizuka, Hiroo
    Okuda, Koichi
    ADVANCES IN ABRASIVE TECHNOLOGY XIV, 2011, 325 : 606 - +
  • [22] Wear distribution characteristics of carbide ball end milling tool focusing on tool path and posture
    Liu, Xianli
    Zhao, Zemin
    Zhang, Hongyan
    Yue, Caixu
    Li, Rongyi
    Liang, Steven Y.
    WEAR, 2022, 498
  • [23] Analysis of impact behavior during ball milling
    Yang, Junyou
    Zhang, Tongjun
    Cui, Kun
    Hu, Zhenhua
    Jinshu Xuebao/Acta Metallurgica Sinica, 1997, 33 (04):
  • [24] ANALYSIS OF THE TOOL DEFLECTION IN END MILLING OF TITANIUM
    Hasenfratz, Christian
    Abele, Eberhard
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 2, 2016,
  • [25] Fabrication of a ball end nose micro milling tool by tangential laser ablation
    Hajri, M.
    Pfaff, J.
    Buttner, H.
    Voegtlin, M.
    Kaufmann, R.
    Wegener, K.
    8TH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC 2018), 2018, 77 : 654 - 657
  • [26] Effect of Tool Orientation on Surface Integrity during Ball End Milling of Titanium Alloy TC17
    Yang Pan
    Yao Changfeng
    Xie Shaohua
    Zhang Dinghua
    Dou Xingtang
    9TH INTERNATIONAL CONFERENCE ON DIGITAL ENTERPRISE TECHNOLOGY - INTELLIGENT MANUFACTURING IN THE KNOWLEDGE ECONOMY ERA, 2016, 56 : 143 - 148
  • [27] Prediction and modeling of roughness in ball end milling with tool-surface inclination
    Bilek, O.
    Milde, R.
    Strnad, J.
    Zaludek, M.
    Bednarik, M.
    DEVELOPMENT OF MATERIALS SCIENCE IN RESEARCH AND EDUCATION (DMSRE29), 2020, 726
  • [28] Mechanical and technological aspects of micro ball end milling with various tool inclinations
    Wojciechowski, Szymon
    Mrozek, Krzysztof
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2017, 134 : 424 - 435
  • [29] Time-varying analytical model of ball-end milling tool wear in surface milling
    Zhao, Zemin
    Liu, Xianli
    Yue, Caixu
    Zhang, Hongyan
    Li, Rongyi
    Liang, Steven Y.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 108 (04): : 1109 - 1123
  • [30] The effect of tool material grain size on the machining process in ball end milling
    Farooq Ahmed
    Tae Jo Ko
    Jongmin Lee
    Yein Kwak
    Rendi Kurniawan
    The International Journal of Advanced Manufacturing Technology, 2020, 106 : 4411 - 4421
12345