The analysis of instantaneous tool displacements during precise ball end milling

被引：0
|
作者：
Wojciechowski, Szymon [1 ]
机构：
[1] Poznan Univ Tech, Inst Mech Technol, Fac Mech Engn & Management, Poznan, Poland
来源：
MODERN TECHNOLOGIES IN MANUFACTURING (MTEM 2017 - AMATUC) | 2017年 / 137卷
关键词：
VIBRATIONS; FORCES; FINISH; WEAR;
D O I：
10.1051/matecconf/201713705008
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper presents the quantitative and qualitative analysis of monolithic ball end mill's instantaneous displacements generated during precise milling of inclined surfaces. The conducted experiment involves the measurements of tool's joining part displacements with the application of laser displacement sensor and cutting forces with piezoelectric dynamometer. The milling tests were carried out for the hardened alloy 55NiCrMoV6 steel in a range of variable feed per tooth and surface inclination angle values. The obtained results can be applied for the selection of effective milling parameters allowing the improvement of machined surface finish.
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Study on metrological relations between instant tool displacements and surface roughness during precise ball end milling
    Wojciechowski, S.
    Wiackiewicz, M.
    Krolczyk, G. M.
    MEASUREMENT, 2018, 129 : 686 - 694
  • [2] Modeling of cutter displacements during ball end milling of inclined surfaces
    Wojciechowski, S.
    Chwalczuk, T.
    Twardowski, P.
    Krolczyk, G. M.
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2015, 15 (04) : 798 - 805
  • [3] The influence of tool wear on the vibrations during ball end milling of hardened steel
    Wojciechowski, Szymon
    Twardowski, Pawel
    6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014), 2014, 14 : 587 - 592
  • [4] Modeling of the instantaneous milling force per tooth with tool run-out effect in high speed ball-end milling
    Zhu, Kunpeng
    Zhang, Yu
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2017, 118 : 37 - 48
  • [5] Application of signal to noise ratio and grey relational analysis to minimize forces and vibrations during precise ball end milling
    Wojciechowski, Szymon
    Maruda, Radoslaw W.
    Krolczyk, Grzegorz M.
    Nieslony, Piotr
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2018, 51 : 582 - 596
  • [6] Prediction of the Instantaneous Milling Force of Ball End Milling Cutter for Convex Surface of Splicing Mold
    Wu S.
    Zhang T.
    Liu X.
    Liu H.
    Yang L.
    Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis, 2020, 40 (05): : 948 - 956
  • [7] Influence of Vibration Amplitude on Tool Wear During Ball End Milling of Hardened Steel
    Antsev, A., V
    Ngon Dang Thien
    Trong Dang Huu
    Yanov, E. S.
    PROCEEDINGS OF 2018 4TH INTERNATIONAL CONFERENCE ON GREEN TECHNOLOGY AND SUSTAINABLE DEVELOPMENT (GTSD), 2018, : 232 - 236
  • [8] Mechanistic modeling of ball end milling including tool wear
    Ning, L
    Veldhuis, SC
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, VOL 32, 2004, 2004, : 103 - 110
  • [9] Prediction of tool deflection and tool path compensation in ball-end milling
    Nasreddine Zeroudi
    Michaël Fontaine
    Journal of Intelligent Manufacturing, 2015, 26 : 425 - 445
  • [10] Prediction of tool deflection and tool path compensation in ball-end milling
    Zeroudi, Nasreddine
    Fontaine, Michael
    JOURNAL OF INTELLIGENT MANUFACTURING, 2015, 26 (03) : 425 - 445
12345