MICROSTRUCTURE CHARACTERISTICS OF Fe-0.85Mo-3Mn-0.5C SINTERED STEEL IN DEPENDENCE ON SINTERING CONDITIONS

被引：0

作者：

Simkulet, Vladimir ^{[1
]}

Parilak, L'udovit ^{[1
]}

机构：

[1] Univ Kosice Seat Presov, Fac Mfg Technol Tech, Presov 08001, Slovakia

来源：

CHEMICKE LISTY | 2012年 / 106卷

关键词：

powder metallurgy; alloying; microhardness measurement;

D O I：

暂无

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

V. Simkulet, and L. Parilak (Faculty of Manufacturing Technologies of the Technical University of Kosice with a seat in Presov, Slovakia): Microstructures Characteristics of Fe-0.85Mo-3Mn-0.5C Sintered Steel in Dependence on Sintering Conditions Manganese in combination with Molybdenum atomized prealloyed powder forms a new group of sintered high strength steels. The final properties of these steels depend on microstructure homogeneity. The aim was to investigate the alloying of molybdenum prealloyed powder with manganese in comparison with plain iron powder. The circular cross section samples were prepared for the investigation from basis water atomized and plain iron powders. The microstructure characteristics of sintered samples were characterized by micro hardness measurement.

引用

页码：S529 / S530

页数：2

共 50 条

[41] Effect of Nb contents on microstructure characteristics and yielding behavior of Fe-4Mn-2Al-0.2C steel
Huo, Weifeng
Song, Renbo
Zhang, Zherui
Wang, Yongjin
Zhou, Naipeng
Zhao, Shuai
Zhang, Yu
Sun, Jianlin
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 819
[42] Evaluation of microstructure and mechanical properties of Fe-1.2Mn-0.3Cr-1.4Ni-0.4Mo-C steel welded joints
Chen, Jie
Li, Changsheng
Ren, Jinyi
Tu, Xingyang
Cao, Yu
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (06): : 13793 - 13800
[43] Influence of Nb Microaddition on Microstructure and Texture Evolution in a Fe-21Mn-1.3Al-1.5Si-0.5C TWIP Steel under Uniaxial Hot-Tensile Conditions
A. E. Salas-Reyes
I. Mejía
J. M. Cabrera
MRS Advances, 2017, 2 (61) : 3797 - 3803
[44] Microstructural and Fracture Behavior of Phosphorus-Containing Fe-30Mn-9Al-1Si-0.9C-0.5Mo Alloy Steel
Ryan A. Howell
David C. Van Aken
Metallurgical and Materials Transactions A, 2015, 46 : 3309 - 3316
[45] Microstructural and Fracture Behavior of Phosphorus-Containing Fe-30Mn-9Al-1Si-0.9C-0.5Mo Alloy Steel
Howell, Ryan A.
Van Aken, David C.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (08): : 3309 - 3316
[46] Temperature dependency of hydrogen embrittlement resistance of austenitic Fe-24Mn-3Cr-0.5Cu-0.47C steel
Lee, Woo-Joong
Lee, Jin-Young
Oh, Seon-Keun
Yang, Hanna
Park, Jaeyeong
Baek, Un Bong
Lee, Young-Kook
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 889
[47] Effect of Cold Deformation on Microstructure and Mechanical Properties of a Fe-20Mn-19Cr-0.5C-0.6N High Nitrogen Austenitic Steel
Peng, Mengdu
Shi, Jie
Cui, Bing
Sun, Ting
Li, Xiaoyuan
Wang, Maoqiu
STEEL RESEARCH INTERNATIONAL, 2017, 88 (11)
[48] In situ TEM observations of the growth of bainitic ferrite in an Fe-0.3C-3Mn-1.5Si-0.15Mo steel
Nutter, John
Qi, Jiahui
Farahani, Hussein
Rainforth, W. Mark
van der Zwaag, Sybrand
ACTA MATERIALIA, 2023, 252
[49] Effect of Cr3C2 Content on Microstructure and Properties of Fe0.5CoCr0.5Mo0.3Ni High-entropy Alloy Remelting Coating
Li, Yongfeng
Liu, Meiqin
Wang, Lixia
Li, Xiaoying
Wu, Ning
Zhang, Jian
Surface Technology, 2024, 53 (21): : 176 - 186
[50] Effect of Nb and Mo on the hot ductility behavior of a high-manganese austenitic Fe-21Mn-1.3Al-1.5Si-0.5C TWIP steel
Mejia, I.
Salas-Reyes, A. E.
Bedolla-Jacuinde, A.
Calvo, J.
Cabrera, J. M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 616 : 229 - 239

← 1 2 3 4 5 →