MICROSTRUCTURE CHARACTERISTICS OF Fe-0.85Mo-3Mn-0.5C SINTERED STEEL IN DEPENDENCE ON SINTERING CONDITIONS

被引：0
|
作者：
Simkulet, Vladimir [1 ]
Parilak, L'udovit [1 ]
机构：
[1] Univ Kosice Seat Presov, Fac Mfg Technol Tech, Presov 08001, Slovakia
来源：
CHEMICKE LISTY | 2012年 / 106卷
关键词：
powder metallurgy; alloying; microhardness measurement;
D O I：
暂无
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
V. Simkulet, and L. Parilak (Faculty of Manufacturing Technologies of the Technical University of Kosice with a seat in Presov, Slovakia): Microstructures Characteristics of Fe-0.85Mo-3Mn-0.5C Sintered Steel in Dependence on Sintering Conditions Manganese in combination with Molybdenum atomized prealloyed powder forms a new group of sintered high strength steels. The final properties of these steels depend on microstructure homogeneity. The aim was to investigate the alloying of molybdenum prealloyed powder with manganese in comparison with plain iron powder. The circular cross section samples were prepared for the investigation from basis water atomized and plain iron powders. The microstructure characteristics of sintered samples were characterized by micro hardness measurement.
引用
收藏
页码：S529 / S530
页数：2
相关论文
共 50 条
  • [31] Experimental investigations on welding behaviour of sintered and forged Fe-0.3%C-3%Mo low alloy steel
    Chandramouli, R.
    Kandavel, T. K.
    Karthikeyan, P.
    MATERIALS & DESIGN, 2014, 53 : 645 - 650
  • [32] Influence of microstructure evolution on hot ductility behavior of a Cr and Mo alloyed Fe-C-Mn steel during hot deformation
    Sun, Zhendong
    Shen, Depeng
    Liu, Guoqiang
    Guo, Ning
    Guo, Fu
    Zhang, Zhen
    Sun, Wei
    Tang, Bingtao
    MATERIALS TODAY COMMUNICATIONS, 2024, 39
  • [33] Influence of Partitioning Temperature on Microstructure and Mechanical Performance of Medium Manganese Fe-C-Mn-Cu-Cr-Mo-Nb Steel
    Lin, Tao
    Feng, Yan
    Liu, Lei
    Jing, Cainian
    Wu, Zhonglin
    Li, Zhaotong
    Zhao, Jingrui
    METALS, 2022, 12 (12)
  • [34] Effect of carbon content and post-sintering cooling rate on mechanical properties of Fe-Ni-Cu-Mo-C high density sintered steel
    Ivanus, R.
    Brandusan, L.
    MATERIALS AND TECHNOLOGIES, 2007, 23 : 79 - +
  • [35] Gradient characteristics and strength matching in friction stir welded joints of Fe-18Cr-16Mn-2Mo-0.85N austenitic stainless steel
    Du, Dongxu
    Fu, Ruidong
    Li, Yijun
    Jing, Lei
    Ren, Yibin
    Yang, Ke
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 616 : 246 - 251
  • [36] Influence of sintering conditions on microstructure and oxygen permeation of Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) oxygen transport membranes
    Baumann, S.
    Schulze-Kueppers, F.
    Roitsch, S.
    Betz, M.
    Zwick, M.
    Pfaff, E. M.
    Meulenberg, W. A.
    Mayer, J.
    Stoever, D.
    JOURNAL OF MEMBRANE SCIENCE, 2010, 359 (1-2) : 102 - 109
  • [37] Characterisation of microstructure and hardness of perovskite-structured Ba0.5Sr0.5Co0.8Fe0.2O3-δ under different sintering conditions
    Wang, Li
    Dou, Rui
    Bai, Mingwen
    Li, Yizhe
    Hall, David
    Chen, Ying
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2016, 36 (07) : 1659 - 1667
  • [38] Effect of electromagnetic process on the microstructure and wear resistance of austenite medium Mn steel with granular γ+(Fe,Mn)3C eutectics
    Liang, GF
    Xu, ZM
    Li, JG
    Jiang, QC
    JOURNAL OF MATERIALS SCIENCE, 2004, 39 (03) : 1121 - 1123
  • [39] Effect of electromagnetic process on the microstructure and wear resistance of austenite medium Mn steel with granular γ + (Fe,Mn)3C eutectics
    Gao-Fei Liang
    Zhen-Ming Xu
    Jian-Guo Li
    Qi-Chuan Jiang
    Journal of Materials Science, 2004, 39 : 1121 - 1123
  • [40] Helium effect on the structure of Fe-0.6C-16Cr-15Ni-3Mo-0.5Nb steel
    Vagin, SP
    Utkelbayev, BD
    Chakrov, PV
    JOURNAL OF NUCLEAR MATERIALS, 1996, 233 : 1168 - 1173
12345