MICROSTRUCTURE CHARACTERISTICS OF Fe-0.85Mo-3Mn-0.5C SINTERED STEEL IN DEPENDENCE ON SINTERING CONDITIONS

被引：0
|
作者：
Simkulet, Vladimir [1 ]
Parilak, L'udovit [1 ]
机构：
[1] Univ Kosice Seat Presov, Fac Mfg Technol Tech, Presov 08001, Slovakia
来源：
CHEMICKE LISTY | 2012年 / 106卷
关键词：
powder metallurgy; alloying; microhardness measurement;
D O I：
暂无
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
V. Simkulet, and L. Parilak (Faculty of Manufacturing Technologies of the Technical University of Kosice with a seat in Presov, Slovakia): Microstructures Characteristics of Fe-0.85Mo-3Mn-0.5C Sintered Steel in Dependence on Sintering Conditions Manganese in combination with Molybdenum atomized prealloyed powder forms a new group of sintered high strength steels. The final properties of these steels depend on microstructure homogeneity. The aim was to investigate the alloying of molybdenum prealloyed powder with manganese in comparison with plain iron powder. The circular cross section samples were prepared for the investigation from basis water atomized and plain iron powders. The microstructure characteristics of sintered samples were characterized by micro hardness measurement.
引用
收藏
页码：S529 / S530
页数：2
相关论文
共 50 条
  • [21] Dependence of Charpy Impact Properties of Fe-30Mn-0.05C Steel on Microstructure
    Xiong, Jianchao
    Li, Heng
    Kong, Ling
    Zhang, Xiaodan
    Cao, Wenquan
    Wang, Yuhui
    CRYSTALS, 2023, 13 (02)
  • [22] Microatmosphere sintering of Fe-3.2Mn-1.5Si-0.5C steel in flowing technical nitrogen
    Cias, Andrzej
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2015, 106 (05) : 494 - 502
  • [23] Fatigue of sintered steels (Fe-1.5 Mo-3 Mn-0.7 C)
    H. Khorsand
    S. M. Habibi
    K. Janghorban
    H. Yoozbashizade
    S. M. S. Reihani
    Materials and Structures, 2004, 37 : 335 - 341
  • [24] Effect of Quenching Process on Microstructures and Mechanical Properties of Fe-0.9Mn-0.5Cr-2.4Ni-0.5Mo-C Steel
    Chen, Jie
    Li, Changsheng
    Jin, Xin
    Chen, Liqing
    Fang, Lei
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (04) : 1505 - 1513
  • [25] Effect of Quenching Process on Microstructures and Mechanical Properties of Fe-0.9Mn-0.5Cr-2.4Ni-0.5Mo-C Steel
    Jie Chen
    Changsheng Li
    Xin Jin
    Liqing Chen
    Lei Fang
    Journal of Materials Engineering and Performance, 2018, 27 : 1505 - 1513
  • [26] Effect of manganese content and manganese carrier on properties of sintered and sinter hardened hybrid Fe-3Cr-0.5Mo-xMn-0.24C steel
    Salak, A.
    Selecka, M.
    POWDER METALLURGY, 2008, 51 (04) : 327 - 339
  • [27] Effect of carbon on microstructure and properties of C-1.5Mn-2.5Ni-0.5Cr-0.5Mo high strength steel weld metal
    Qi, Yanchang
    Peng, Yun
    Wei, Jinshan
    Tian, Zhiling
    Hanjie Xuebao/Transactions of the China Welding Institution, 2010, 31 (11): : 41 - 44
  • [28] Industrial processing, microstructures and mechanical properties of Fe-(2-4)Mn (-0.85Mo)-(0.3-0.7)C sintered steels
    Dudrová, E
    Kabátová, M
    Bidulsky, R
    Wronski, AS
    POWDER METALLURGY, 2004, 47 (02) : 181 - 190
  • [29] THE INFLUENCE OF TEMPERING CONDITIONS ON MICROSTRUCTURE AND CARBIDE FORMATION IN 0.3C-1.1MN-0.3MO-0.2CR STEEL
    JANOVEC, J
    VYROSTKOVA, A
    HOLY, A
    CANADIAN METALLURGICAL QUARTERLY, 1994, 33 (03) : 227 - 232
  • [30] Effects of alloying addition on deformation mechanisms, microstructure, texture and mechanical properties in Fe-12Mn-0.5C austenitic steel
    Kalsar, Rajib
    Ray, Ranjit Kumar
    Suwas, Satyam
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 729 : 385 - 397
12345